Cutting foiles machine

HOMAG OPTIMAT PFS 700/15

Condition: used, machine/vehicle number: 006901, X axis working area: 7400 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 13 Bku3Vm7Mmwv Total number of tool changer positions: 18

Condition: used, Year of construction: 2018, Cutting length: 3.200 mm Pusher stroke: 3.200 mm Number of grippers: 7 Feedrate max: 80 m/min Continuously variable feed: Yes Saw blade projection: 60 mm Main motor power: 7,5 kW Scoring saw: Yes Bsah8Omlybg Label printer: Yes Labelling: manually Veneer-edging stops: Yes HOMAG Pneumatic trimming stops: Yes Stop side: Right side HOLZMA | HOMAG Machine table with air nozzles throughout: Yes HOMAG 2-fingered grippers: Yes HOMAG Power-Loc: Yes Control: HOMAG CADMATIC 5, Homag powerTouch Conformity marking: CE mark

Condition: used, Year of construction: 2021, machine/vehicle number: 0-341-73-3486, with control unit, PC, flat screen DELL approx. 24", label printer HOMAG Pica II Cs9I2P22A0

Condition: used, machine/vehicle number: 005939, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1500 mm Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr Ch9Pbaty9K

Year of construction: 1997, Condition: used, machine/vehicle number: 0-201-22-211, 4 Achs Maschine Hauptspindel 18 KW, Wasser gekühlt Aufnahme HSK F63 X= 4750mm Y= 1250mm Z= 200 mm Drehzahl max.: 18.000 U/min WZW 12-fach Nutsäge in X 4-fach Bohrkopf im 17 Spindler Zentralschmierung 17 Bohrspindeln vertikal, komplett erneuert 2019 glatter Tisch Dqmfcj Positionierhilfe Anschlagreihen Pendelbearbeitung 2 Vakuumpumpen Alle Einsteckkarten Steuerung 2022 ersetzt. WoodWOP 4.0 Werkzeug optional: Schloßkastenfräser Aggregat Türband Bohraggregat Sägeblatt Aggregat 4 spindler Aggregat Sehr gepflegter Zustand Lagerort: Kunde

Condition: excellent (used), Year of construction: 2009, CNC HOMAG OPTIMAT BMG 511 /60/12/F/K CNC WORKING CENTER (POINT TO POINT) 5 AXIS (DRIVE 5C +) CNC- controlled processing centre in moving gantry construction for trimming and drilling panels of wood or similar material. Prepared for 1 main spindle, mounted on the right side of the gantry beam. Numerical Control PC85 Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 10 Table dimensions 1250 mm Clamps for workpieces fixing Pneumatic Kit powerClamp - clamping element - K Table Automatic Tools Changing System Tools storage plate (No. of folds-positions) 14 E2Pnyyy Max. useful working area (X-Y-Z) mm 6175 x 1550 x 300 No 2 Working areas Vacuum pump capacity m3/h 2 x 100 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes. Total installed power (50 A) WORKING GROUPS (TOP) No 9 Independent vertical boring spindles (High Speed 7500) No 4 Independent horizontal boring spindles (No. 2 in Xaxe + No. 2 in Y-axe) Drilling head motor-power 1,5 Kw No 1 Vertical electro-spindles HSKF63 DRIVE 5C +. Vertical electrospindles motor power (KW 10/12)

Condition: excellent (used), Year of construction: 2021, operating hours: 564 h, Functionality: fully functional, CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 - 850 mm Workpiece thickness 12 - 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical drilling gear V13/32 mm High Speed 2 drill rows with 5 drills each parallel in X-direction 1 drill row with 5 drills in Y-direction Total drill bit length 70 mm Drill diameter max. 35 mm Spindle distance 32 mm Horizontal drilling gear with 4 spindles (2 right, 2 left) in X-direction, individually retrievable, drill spacing 32 mm Horizontal drilling gear with 2 spindles (1 right, 1 left) in Y-direction, can be called up individually Grooving saw in X-direction, diameter 100 mm HSK 63 tool change spindle and 10 kW converter Tool diameter max. 25 mm Tool clamping length max. 80 mm Speed 1250 - 24000 rpm infinitely programmable Max. Power at tool 8.5/10 kW 4-fold lateral pick-up tool changer for HSK 63 Tool diameter max. 25 mm Tool clamping length max. 80 mm Tool change time max. 16 sec. Starter package Lamello P-System vertical Energy saving function Powercontrol with Powertouch Tapio Ready Network connection Ethernet CNC USB hard disk for IMAGE Blcqq3Qc88V German PC keyboard Woodwop Woodwop DXF-Import Basic 3D CNC simulation machine Machine data acquisition and evaluation - MMR basic Basic barcode reading system Machine is in very good condition! Weight approx. 1580 kg

Condition: used, Year of construction: 2006, Edgeband thickness max: 20 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 55 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system granulate: Premelting unit Quick-change glue pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Type: left-side machine Dqoodp

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle speed (max.): 24,000 rpm, Provision: FCA - loading equipment must be provided by the buyer - can be borrowed from Homag TECHNICAL DETAILS Workpiece lengths: max. 6,000 mm (single), max. 2,375 mm (pendulum) Workpiece lengths for workpiece Ø 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum) Front workpiece width: max. 1,150 mm (all units) Workpiece width at the front for routing with 25 mm diameter: max. 1,220 mm Front workpiece width for gluing: max. 1,220 mm Workpiece width at the rear: max. 1,400 mm (all units) Workpiece width at the rear for routing with 25 mm diameter: max. 1,550 mm Rear workpiece width for gluing: max. 1,475 mm Rear workpiece width with standard flush trimming and gluing: max. 1,500 mm Workpiece thickness: max. 300 mm including clamping device (router) Workpiece thickness with standard clamp: max. 60 mm Workpiece thickness: min. 12 mm (chamfer milling) Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm) Spindle and tool changer Main spindle: 15 kW, HSK F63 Spindle speed: 24,000 rpm C-axis: with unit interface Cegnvfdc2U Plate changer: 18-position, D = 130 mm Tool weight: max. 6 kg Tool weight incl. holder for units: max. 10 kg Drilling head Spindles: 30 (V20 / H10 / S360° "MPU") Drill head motor: 2.7 kW, frequency-controlled Speed: max. 7,500 1/min Vertical spindles: 20, high-speed, arranged in a U-shape (3 rows with 11, 3 and 6 spindles) Horizontal spindles: 10, arranged in pairs (4 pairs with 32 mm pitch, 1 pair 320 mm apart) Sawing and routing Grooving and cutting saw: saw blade Ø max. 200 mm Attachment milling spindle for drilling head: 6 kW (for S6 operation) FLEX-5 FLEX-5 sawing, milling and drilling unit: for tool changer C-axis extension for FLEX-5 unit: Coupling element for C-axis Gluing unit POWER EDGE gluing unit: For gluing edge material to straight workpiece edges Edge height: max. 105 mm (gluing unit BAZ222/322) Workpiece thickness during edging: max. 100 mm Further units Flush trimming unit: for tool changer Combined flush trimming and scraper unit: WD 100 mm Combination snipping and corner rounding unit: traced Lock case trimming unit: 2 spindles, D = 16/20 mm EQUIPMENT - with gluing unit - with FLEX-5 unit - Chip conveyor belt: for B200/52-72 - LED position indicator: Console 1,300-1,600 mm - LED position indicator for precise workpiece handling - Extended workpiece processing options thanks to flexible unit system - without tools The technical data and descriptions are taken from a copy of the order confirmation at the time. Data is for information only and is not binding.

Condition: used, machine/vehicle number: 007695, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes C2Sddaf9 Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) Blzojmvglfn LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Total installed power (Kw) 27,5 (ca.) WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: used, Year of construction: 2005, Used CNC machining center Homag BOF 612/34/13/2R year of construction 2005 2 x milling spindle 11 KW, 4-axis 2 x disk changer 10-fold 2 x drilling head 13 spindles, 9 vertical, 2+2 horiz. Machining dimensions - Workpiece length (X-direction) - max. 3440 mm with single occupancy, 1 spindle - max. 3740 mm with single assignment, 1 spindle with workpiece stop table outer edge - max. 1680 mm with pendulum loading, 1 spindle - max. 1830 mm with pendulum loading, 1 spindle with workpiece stop table outer edge Rqjsv9Oa - max. 800 mm with 4-fold assignment, synchronous machining - Workpiece width (Y-direction) For BOF./34/13/R - max. 1550 mm for milling with workpiece diam. tool diam. 25 mm - max. 1300 mm for all units - Machining and clamping of max. workpiece sizes according to technical data sheet - Workpiece thickness - max. 300 mm incl. clamping device - up to max. 60 mm with standard clamps without Restriction for units and extraction Equipped options - Automatic central lubrication - Power Pack for drives - 22 x stop bolts for grid table - 4-fold assignment - separate X-axis for 2nd main spindle

Condition: like new (used), Year of construction: 2018, operating hours: 750 h, Functionality: fully functional, machine/vehicle number: 0-250-05-0075, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale BHX 050 cnc machining center,in good working condition,well-maintained,with little operating time. Its condition can be seen in the pictures. Bsdkc20Gg88

Condition: used, Year of construction: 2021, Cutting length: 3.200 mm Pusher stroke: 3.200 mm Number of grippers: 7 Feedrate max: 80 m/min Saw blade projection: 80 mm Main motor power: 11 kW Scoring saw: Yes Groove cutting function: Yes Label printer: Yes Labelling: Yes, manually HOMAG PICA II 103: Yes Stop side: Right side Optimization: Yes HOMAG SCHNITT PROFIT 11: Yes HOMAG DustEx: Yes HOMAG Machine table fully equipped with air jets: Yes HOMAG 2-fingered grippers: Yes Cqutcxrs88 Side alignment: Yes Control: HOMAG CADMATIC 5, Homag powerTouch Conformity marking: CE mark

Condition: used, Year of construction: 2017, operating hours: 6,187 h, Functionality: fully functional, CNC machining center PROFI BMG211 / 45 / 15 / K Year 2017 - 4 axes - with FLEX 5+ unit - 36 vertical drilling spindles Ctq7Hvr2Mg - 6 horizontal drilling spindles - Grooving saw - WoodWOP 7

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1400 mm Bxd0W8Lowk Operating Units: 3 nr

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 0-201-25-5219, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,400 mm, type of input current: three-phase, Equipment: rotational speed infinitely variable, Homag BAZ 31/40K Optimat Os9Kzctw with edging unit Fully functional and still in use Can be inspected and tested under power To be sold due to closure of the joinery Dismantling and loading can be offered separately

Condition: used, Year of construction: 2021, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 56 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Dqnb2R Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: enclosed cabin Interface for .dxf data: Yes HOMAG Plausibility check: Yes Control: Homag powerTouch, HOMAG POWER CONTROL UPS - Uninterruptible Power Supply: Yes Software: HOMAG tapio ready, HOMAG WOODWOP, HOMAG WOODWOP 7.0 Conformity marking: CE mark

Condition: used, machine/vehicle number: 006486, Max. panel width: 1450 mm Max. panel length: 2500 mm Cbpp9Wvp Length of conveyor: 4100 mm Panel return for edgebander: Right

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Brl8Wqfqef8 Groove saw: 90° turnable LAMELLO Clamex: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Dowel insertion: Yes Glue system: PVAc Dowel diameter: 8 mm Dowel length max: 35 mm Safety device: enclosed cabin HOMAG Plausibility check: Yes Control: HOMAG POWER CONTROL, Homag powerTouch Software: HOMAG WOODWOP 8.0, HOMAG WOODWOP DXF-IMPORT Basic, HOMAG WOODWOP LAMELLO CLAMEX Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: used, machine/vehicle number: 006643, X axis working area: 4175 mm Y axis working area: 1900 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72 E2Nvsn3

Condition: used, Year of construction: 2021, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 56 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Pickup tool changer: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Bcye8Gpv Special workpiece clamping system: clamp gripper Safety device: enclosed cabin Interface for .dxf data: Yes HOMAG Plausibility check: Yes HOMAG ecoPlus: Yes Control: HOMAG POWER CONTROL, Homag powerTouch UPS - Uninterruptible Power Supply: Yes Software: HOMAG tapio ready, HOMAG WOODWOP, HOMAG WOODWOP 7.2 Conformity marking: CE mark

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Bokqinb3Nz8 Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, Year of construction: 2019, Working dimension X: 3.050 mm B0Bgxo7P Working dimension Y: 1.250 mm Working dimension Z: 80 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 20 Horizontal drilling spindles in X: 12 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable HOMAG Split-Head: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Safety device: enclosed cabin Interface for .dxf data: Yes HOMAG ecoPlus: Yes HOMAG - Uninterruptible power supply: Yes Control cabinet cooling: Yes HOMAG Plausibility check: Yes Control: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP 7.1, woodScan, HOMAG MMR BASIC, HOMAG tapio ready, MICROSOFT WINDOWS 7 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 16 kW Weight: 3.700 kg Space requirement Length: 4,8 m Space requirement Width: 2,4 m Space requirement Height: 2,5 m

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Bezvvzdl Total number of drilling spindles: 31 Total number of tool changer positions: 10