Broaching machine / Henning 03E

Henning Typ 03E - Vertikal

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Gedpfx Agexclfzovsbt Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Gbedju D Aagepfx Agvet

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Gjdoup Uzfjpfx Agvobt Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm Godpfx Aeyif Nljgvobt total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: good (used), Year of construction: 1995, 1 used hydraulic CNC keyway broaching machine Manufacturer: Leistritz Model: Polymat 50/400 Gedjy I R N Sjpfx Agvobt Year of manufacture: 1995 CNC keyway width: 50 mm Maximum stroke: 400 mm Bore diameter: 10–350 mm Pulling force: 15.9 kN Max. workpiece outside diameter: 500 mm Table size: 550 x 675 mm Cutting speed: 20 m/min Return speed: up to 40 m/min Machine weight: approx. 1,400 kg

Condition: used, groove width 3-28 mm tool length - max. 1200 mm working speed 3m/min+6m/min m/min pulling capacity 60 kN bei 3m/min kN pulling capacity 40 kN bei 6 m/min kN stroke 1050 mm weight of the machine ca. 600 kg Godpfxoyz Dgds Agvebt Includes a wide selection of reaming needles The following needle widths are available (approx. dimensions): 6; 6; 8; 12; 14; 16; 18 The following mandrels (approx. dimensions): Ø 17; 19; 21; 30; 38; 44; 50; 58

Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories -Ram stroke / pulling length 1300mm -Pulling force 6000kg -Incl. 38x clearing pins -Incl. 95x guide bushings -Work bench -Setting plates -Crane -Platform -2x tool cabinets Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg Gbsdpfxoza U Alj Agvjt Errors and omissions excepted.