9 spindle fourside moulder

GAU-JING GL-930D-CE

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch Ltsdswqda Nspfx Af Sea

Condition: ready for operation (used), Guilliet KXR III with mobile spindle for variable widths + Carpentry package final dimension 240x160mm + Infeed before planing + Reinforced motors Number of spindles: 4 pcs, 40mm diameter Maximum profiling tool diameter, left/right: 180mm Vertical spindle adjustment: 40mm Final width: 240 mm Final height: 160 mm Planer table length: 2500 mm Feed speed: continuously adjustable 4.5–27 m/min Reinforced motor power: Planer: 7.5 kW Ledpfx Afjvq Rnho Ssta Left/right spindle: 11 kW, 1 motor Thicknessing: 9 kW Feed: 2.2 kW Dimensions approx. (L/W/H): 3160 x 1420 x 1440 mm Machine weight approx. 1700 kg Available immediately from site, as currently installed Optional inspection and reconditioning available at extra cost

Condition: used, SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Lsdpfxsmxliao Af Ssta - S/N 25 906/001

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Lodpfjumtlqex Af Seta Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH

Condition: good (used), Weinig Rondamat R960 Year of manufacture: 2002 Ltodpfowzu N Aex Af Sea

Condition: good (used), Year of construction: 2006, Screw compressor Worthington Creyssensac RLR 25 AM8 with air dryer DW21 and receiver F900 (900 liters) Ledpfx Ajhqb T Ref Sjta Year 2006 Working hours: 16405 Condition: very good, after full maintenance (new filters, oil, belts) - Max.pressure: 7,50 bar - Power: 18,5 kW - Capacity: 3300 l/min - Dryer capacity: 3300 l/min - Receiver: 900 l

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Ltsdpsxgrp Usfx Af Sja Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: A34904774, overall weight: 1,765 kg, Equipment: type plate available, Technical details: Voltage: 400 V Phase: 3 Frequency: 50 Hz Air flow rate: 12.44 m3/min Speed: 3000 min-1 Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 10 bar g Full load current: 169 A Ltsdpfx Afewtfk Uj Ssa The CompAir L75-10 A screw compressor is an efficient and reliable solution for compressed air supply in industrial applications. Thanks to its modern technology, it operates energy-efficiently and ensures stable compressed air performance. The compressor is equipped with integrated heat recovery, allowing the useful utilization of the waste heat and further reducing energy consumption.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,371 h, functionality: fully functional, Year of manufacture - 2018 Rated power - 15 kW Maximum working overpressure - 8.0 bar Ledpfxew Nn Hpo Af Seta Ambient temperature 3-45°C Built-in dryer 8371 hours under load 500 l tank

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Ltjdpfx Aoxn Uptof Soa