Paint shop

Feige FE37-E-18

Condition: good (used), Year of construction: 2014, FEIGE, type FE37-E-18, year of manufacture: 2014, base dimensions 6,000 x 6,000 mm, height approx. 6,000 mm, useful volume 98 m³, heating capacity 252 kW, with paint mixing station, control and operating unit, with supply and exhaust air system. Hedpfowyxcdsx Ad Nofb

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Hodpfjun Shgex Ad Nefb Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: Hedpfx Adowzl Hxs Nefb In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 30,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 25 m², power: 18 kW (24.47 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 300 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations Hedpfox Tc Dxsx Ad Nofb 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 300 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 300 is equipped with an integrated heating system with a Riello RG5S burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 30,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.