EWD frame saw line with edger

EWD

Year of construction: 1997, condition: used, EWD DK90 T2L2 Combination Saw Year of manufacture: 1997 Cutting height: 15 mm - 120 mm Cutting width: 80 mm - 750 mm 4 moving blades Feed rate: 15-160 m/min 75 kW Fsdpfx Ahsz Niviedepn Microtec visualization system Cross conveyor - inclined conveyor - infeed table with miter saw - machine - roller conveyor with chip separator

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Fedpfew Emhfsx Ahdjpn Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: good (used), functionality: fully functional, Robust spiral conveyor with right-hand deflection. Length 8.80 m. Roller length 800 mm. Complete with drive unit. Fsdpsz Ixfcefx Ahdepn

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Fpjdpoz Iab Sjfx Ahdsn Roller unit EWD EVW Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Fpedpfxozvy Eio Ahdjn

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Fpsdpez Ehfasfx Ahdsn Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: excellent (used), Profiling line consisting of: Pre-cutting group H 44, FZ 1, FZ 3, FR 16 with 2 side guides Fpedez Ehadspfx Ahdon Re-cutting group TKV, H 42, FZ 3, FR 15 - 2 side guides, FR 12 re-cutting machine, cutting height 280 mm, fixed installation Low-grade wood line Media, 28 cm Wood lengths 2.5 to 4.0 m (can be converted to 5 m lengths)

Year of construction: 2000, condition: used, Well-maintained VK 26 MX for sale. The machine will be available from May 2027 and can also be inspected while in operation. Fsdpozkt Dbofx Ahdopn

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Equipped with electrically driven spreading rollers. Also adjustable manually. Electrical adjustment of the spreading jaws, also asymmetrical. Fedpfx Ahez D Exuedjpn Pressure rollers can be hydraulically extended and retracted. Heavy-duty spreading jaw blades and spring flaps.

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw chuck Fedpfsz Aqlmex Ahdspn Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Fpedjwhv Rnspfx Ahdon

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Fsdpfow Eu Akex Ahdopn

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Fpodpfsywh Hmox Ahdon