Hardening Unit - Induction

ELDEC MIND 750 CNC

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER Iedpfx Asxp Na Njd Njih MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Iedpfsw T Tlrox Ad Nsih Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Iisdjxqp I Nepfx Ad Nsh

Condition: good (used), Year of construction: 1989, piece diametre 1500MM Isdpfefl Aaqsx Ad Nsih max coupling 914MM poids 15 tonnes

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Wheel diameter max 2000 mm 700 mm wheel width Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m Iiodeza Egbepfx Ad Neh

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. Iodpfswvblaox Ad Noih *

Condition: used, Year of construction: 2018, Vibratory conveyor from Wolfgang Hörmle For sale in different versions and in good condition. SRC-N 200 left Isdot Ect Ijpfx Ad Njih SRC-N 200 right SRC-N 250 left SRC-N 250 right HFS 168 control unit

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm) Iiedpfx Adsxytmhs Nsh

Condition: excellent (used), Year of construction: 2008, turning diameter over bed 32 mm spindle passage 32 mm Ijdpfxsvwgmye Ad Noih turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 clamping diameter 32 mm spindle turning speed range 7000 U/min workpiece length - max. 150 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: like new (used), Year of construction: 2013, functionality: fully functional, turning length: 1,600 mm, turning diameter over cross slide: 700 mm, turning diameter: 920 mm, spindle motor power: 2,600 W, spindle speed (max.): 2,500 rpm, spindle bore: 115 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,600 mm, bar passage: 91 mm, total height: 2,765 mm, total length: 5,252 mm, total width: 2,778 mm, CNC Lathe JOHNFORD ST-70 AH 6 CF + Y TECHNICAL SPECIFICATIONS Brand: Johnford Model: ST-70 AH+CF+Y Year: 2013 CNC: Fanuc 21i-TD Swing over bed: 920 mm Swing over carriage: 700 mm X-axis travel: 370 mm Z-axis travel: 1600 mm Y-axis travel: +/-075 mm Driven tool + Y axis TBYA 250 turret (12 positions) - 3276 rpm / 37 kW Hydraulic 3-jaw chuck Ø 304 Programmable hydraulic tailstock with rotary quill Chip conveyor Bar capacity: 91 mm Spindle A2-8 / 2500 rpm / 22-26 kW PRICE AND FURTHER INFORMATION UPON REQUEST Iodpeyz R D Nefx Ad Njih (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)