UV Dryer Efsen, 2 tubes, 120W/cm

Efsen Woodcure 1400

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET SECOND-HAND, FULLY RECONDITIONED Ncjdpsdvlcysfx Ahwjn

Condition: good (used), functionality: fully functional, number of engines: 4+4 opening: 6 meters Ncsdpfjw D Nq Tsx Ahwsn

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. Nsdjif N Sxepfx Ahwecn 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.

Condition: good (used), Year of construction: 2010, Poliedra is a dryer suitable for the curing of UV lacquers on three-dimensional surfaces. In the case of spray applications, the UV dryer must also cure the product applied to the vertical edges of the panel. Superfici developed UV modules with special reflectors. The special geometry of the reflector of the "Poliedra" UV supports a uniformly UV irradiation distribution, both on the surface and on the edges. In this way, with a single lamp, inclined with respect to the direction of advancement of the pieces, Ncjdpfemmbvtsx Ahwsn lamp length 1700 mm – 120 W/cm available lamp power from 40 to 120 W/cm type of lamps gallium and mercury (new lamps)

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Ncsdpfxetzld Ue Ahwsn

Condition: like new (used), Year of construction: 2017, Barely used UV line for panels or flooring Njdjv Ux R Sopfx Ahwocn

Year of construction: 1969, condition: good (used), Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Nedpfx Aeidckfohwocn Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: new, Cefla painting system Ncsdpowhbrwjfx Ahwon

Condition: used, Year of construction: 2010, operating hours: 100,000 h, functionality: fully functional, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 50,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 65,000 mm, total width: 2,700 mm, power: 365 kW (496.26 HP), input frequency: 50 Hz, input current: 930 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, complete lacquering line: 2x Costa K7 sanders (2010, 1st- 2x roller / 2x pads, 2nd- 2x brushing, 1x pad ) 1x Heesemann sander (LSM8 2006.12.161) 2x Wikoma hot air drying tunnel (2002) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRIM+TN 3500/HT / 2lamps UV 2000 M2+CRIM+TN 3500/HT / 1lamp UV 2000 M1+CRIM+TN 3000/HT / 3lamps UV 2000 M3+CRIM+TN 4000/HT) 2x stain roller coaters ( Smartcoater M) 2x heavy putty roller coaters (Smartcoater SP1) 3x lacuer roller coaters (Smartcoater MF) Nedov Tbgyepfx Ahwjcn 8x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This Ncsdpfx Ajfgyigjhwjn ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.