Spare parts for CELASCHI DET

CELASCHI TSA

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 Ledewzmbqjpfx Ai Rsag X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt Lajdpfx Aowgbw Rsi Rjg 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) Laedpfxjyz Si Hj Ai Rjg - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment Laodpfx Aieyz Siae Rjg - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Laodpeyfgrpefx Ai Rjg Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: TSA5215 – TSA5218 – TSA5220, We are an Italian Company and we have this machinery installed into our factory in Tunisia. The line is currently configured for the production of floating flooring strips with Uniclic profile and is equipped with a complete set of diamond tools. The line is still installed and can be inspected under power. Production tests are available upon request. Line includes • Panel cutting machine • Motorized roller conveyor • Double machine for long-side profiling • Automatic transfer system • Double machine for end profiling • Automatic stacking system • Complete handling conveyors Technical Features • 10 spindles • Opening machine 1: 180–1200 mm • Opening machine 2: 200–1800 mm • Installed power: 92 kW • 380 V electrical supply Advantages • Complete production line • Immediately available • Installed and fully operational Lasdpfx Aiozkv Ezj Rog • Inspection and production test possible • Ideal for flooring, panels and similar products

Condition: refurbished (used), Year of construction: 2023, Lengthwise and crosswise parquet line completely renovate with fully guarantee. Width min/max 80-400 mm Lajdpfx Aelaxinoi Reg Length min/max 500-3000 mm 4+4 motors per side Customized machine according to customer needs

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t Lodpfx Aek Sat Dei Rjag +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, working width: 3,000 mm, overall weight: 5,000 kg, input voltage: 380 V, Equipment: documentation/manual, Celaschi TSA300DS double-blade squaring saw Mobile shoulder opening 3000 mm, controlled via touchscreen Minimum working width 200 mm 5+5 motor groups Slider width 65 mm Feed rollers with 400 mm pitch Pneumatic activation of the cutter block Automatic activation controlled by CNC Laodpjzfvtnsfx Ai Rsg Adjustable feed speed (m/min): 4-24

Condition: excellent (used), I sell the double end cutting and tenoning machine CELASCHI TSA 300. Working width up to 3000mm Feeding speed 3-18 m/min. Configuration left side / fix: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Lasdpjvxu Uhefx Ai Rjg Configuration right side / moving: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: used, Year of manufacture 2003 2.2 kW 3.0 HP including documentation, COC Ljdpfxjw Upn Ej Ai Roag