Board Stacker

Brettstapler

Condition: new, Dimensions: W2500 / L5250 / H- 2100 Fjdpfx Aeu E Ezpohaepk

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. Fpedpfxowgbw Re Ahaok 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool Fodpfx Asukvgrjhaopk • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm Fpedpfx Ahsw D Hy Seaek - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor - Feed speed up to 114 m/min (currently set to 95 m/min)

Condition: used, Bark remover Cambio 500 in good condition Fodpfx Aewi Iz Ijhaspk

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor Fodpewlfdxofx Ahajpk • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: JC9093, total height: 3,300 mm, total length: 38,000 mm, total width: 115,300 mm, load capacity: 3,200 kg, We are offering this used Konecranes CXTD 3.2 t x 11.53 m double girder overhead crane with hoist trolley, year of manufacture 2015. Manufacturer: Konecranes Model: CXTD 3.2 t x 11.53 m Year of manufacture: 2015 Lifting capacity: 3.2 t Span: 11.53 m Type: double girder overhead crane with hoist trolley Dismantling and collection to be handled by the buyer Fodpoyxz S Esfx Ahaepk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616003 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade Fsdswcq E Aopfx Ahaopk ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: new, Log Grapple for 14tons Excavator Fedst T Ry Sspfx Ahaepk Rotation system is included SALES FROM STOCK

Condition: as good as new (ex-display), Year of construction: 2015, For sale, we offer a strapping machine, model TV02, manufactured by Schneider&Ozga. Condition: very good, like new, never used. The fully automatic strapping machine TV 02 is impressive due to its maintenance-free direct drives and simple operation. Strapping capacity of 30 single packages and 15 parallel packages per minute Strapping band width of 5 to 12 mm Various frame sizes Conveyor belts with four straps Band closure off-center TECHNICAL DATA Performance: Up to 30 single straps/minute Up to 15 parallel straps/minute Package size: Width: max. 600 mm, min. 160 mm Height: max. (without press) 650 mm, max. (with press) 550 mm, min. 10 mm Package weight: max. 25 kg Strapping material: Polypropylene band (PP band) Width: 5 - 12 mm, Thickness: min. 0.35 - 0.70 mm Closure type: Thermo-welded closure Band coil: Core diameter: 200/228 mm, Outer diameter: approx. 450 mm Width: 165-210 mm Electrical: 230 V, 1 phase, 50 Hz Power consumption: 1.1 kW at 230 V Pneumatics: Operating pressure: 4 bar, Consumption Single machine: 90 l/min. (3 l/strap), free air Press pressure: 200 N (cylinder diameter 25 mm) Band tension: max. 200 N Conveyor speed: approx. 26 - 59 m/min. STANDARD EQUIPMENT Fpjdeixz Tcepfx Ahaek · Extraction system · Automatic band feed · Band detection · Infeed and outfeed synchronization with connector · Color RAL 5007 (brilliant blue) · Table belt drive speed continuously adjustable · Short warm-up time · Motors without mechanical brake · PLC control with four adjustable programs for different products · Continuously adjustable back tension · Touchscreen, lockable with a freely selectable code · Strapping counter · Maintenance-free direct drives Price: 12,000€ Net, machine in stock, immediately available Location of the machine: 89-600 Chojnice/Poland If you are interested, please contact us.