Debark

Cambio 500

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Gijdpewxdimsfx Aacep Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Spare parts.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Gisdexhf N Dspfx Aacsp

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: cabin, crane, Baljer & Zembrod OBX IV Reach 13.30m Load capacity 2500kg at 13.0m Gijdpfxsv Tk I Hs Aacsp

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Giedpfx Aaeukvgrjcsp Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor Gisdpfxjw D Hy Ss Aacsp - Feed speed up to 114 m/min (currently set to 95 m/min)

Condition: used, Cambio Debarker 54. If you are interested in purchasing, we are open to discussing the price. Gsdpfxeww A E Rj Aacjip

Condition: refurbished (used), W2600/ L5800 / H- 2250 Giodov Aygdspfx Aacjp

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, round log debarker Valon Kone VK-820-C-3R, Type 820-RE/480/480-12/9-79-RHP-RS/3 Complete with a feed conveyor, feed speed up to 110 m/min Gisdpfx Ajxg Tthsacjp Manufactured in 2005 Serviced in 2023, not in use since

Condition: used, Year of construction: 2015, functionality: fully functional, For sale is a maturation machine from the manufacturer Brüning Haus, year of manufacture 2015. Includes powered roller conveyors before and after the machine. The machine is used and is sold without warranty. Price reduced due to lack of space. Gisdpfx Asxy Nuneacsp

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment Gsdoyaq Dxepfx Aaceip • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts