Condition: ready for operation (used), A package of twelve dyeing machines is available: 1) 2x Then AFT 225 dyeing machines, 2) Then AFS 50 dyeing machine, 3) Then AFE 50 dyeing machine, 4) 4x Then AFS 225 dyeing machines, 5) Fongs HST 130/32 dyeing machine, 6) Then DN 200 dyeing machine, 7) 2x Then OFHT 170 dyeing machines. An on-site inspection is possible. Rodpew R U Aaofx Af Ujp

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Rsdexmkcmjpfx Af Uop

Condition: ready for operation (used), Year of construction: 2022, Stitch type: double lockstitch, number of needles: 2, max. stitch length: 12mm, sewing speed: 2500stitches/min, presser foot lift height: 9mm, clearance A/B: 10mm/20mm, needle spacing range: 3mm-30mm, needle system: 134-35. Machine dimensions X/Y/Z: approx. 1100mm/600mm/1700mm, weight: approx. 75kg. On-site inspection is possible. Rsdpfsyg Nvgox Af Usp

Year of construction: 1985, condition: ready for operation (used), Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible. Rsdjrm S Exspfx Af Uop

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Rjdpfouanq Tex Af Usp

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Redpfx Aouanrwof Ujp

Year of construction: 2014, condition: ready for operation (used), Three machines for heel processing are available. 1) Heel screwing and gluing machine Sabal S60 ORO/KITHGS, year of manufacture: 2014, production capacity: approx. 1400pairs/8h, air consumption: 22l/cycle, machine dimensions X/Y/Z: approx. 800mm/700mm/1950mm, weight: approx. 400kg. 2) Heel screwing and nailing machine Sabal 320, year of manufacture: 2008. 3) Heel shoe sole press USM DVSK-RC. An on-site inspection is possible. Rjdpfx Afoxnp Rfe Uop

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Rsdpfoxnp Rxjx Af Ujp

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Rsdpfx Afowbuzfe Usp

Condition: ready for operation (used), Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible. Redpfxexz Ew Uo Af Uep

Condition: ready for operation (used), Year of construction: 2025, A twin-needle lockstitch flatbed sewing machine Dürkopp Adler is available. Stitch spacing: approx. 19mm, bobbin diameter: 32mm, sewing speed: 3400 stitches/min, machine dimensions X/Y/Z: approx. 1100mm/500mm/1700mm, weight: approx. 60kg. The machine is almost unused. Documentation available. An on-site inspection is possible. Redpfx Afew Na Ire Uep

Condition: ready for operation (used), Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible. Rjdpfx Afow R Uzvo Ujp

Condition: ready for operation (used), A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible. Redpfsw R U Amjx Af Usp

Condition: ready for operation (used), Year of construction: 1986, A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible. Redpfx Afowhy S No Ujp

Year of construction: 2018, condition: ready for operation (used), A textile washing machine and a textile dryer, both from the manufacturer Nexia, are available. 1) Textile washing machine Nexia LC 55, year of manufacture: 2018, connected load: 9kW, heating medium: steam, max. steam pressure: 4.5bar, drum speed: 829rpm, max. batch weight: 55kg, drum diameter: 977mm, drum depth: 753mm, drum volume: 565l, machine weight: approx. 1700kg. 2) Textile dryer Nexia 55S, year of manufacture: 2018, connected load: 2.2kW, drum speed: 25rpm, drum volume: 1085l, drum diameter: 1200mm, max. batch weight: 36kg, heating type: steam, machine weight: approx. 800kg. Documentation available. An on-site inspection is possible. Redpfjyhqckjx Af Uop

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Rodew Sxyropfx Af Uop

Year of construction: 1991, condition: ready for operation (used), These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible. Rodpew Tl Irsfx Af Usp

Condition: ready for operation (used), Year of construction: 2012, A Durst textile printer including Klieverik calender is available. 1) Large format textile printing machine Durst Rhotex 320 for sublimation prints, year of construction: 2012, print type: inkjet, max. print width: 3200mm, max. media thickness: 2mm, resolution: 600dpi, print speed: 65m²/h, colors: CMYK. Machine dimensions X/Y/Z: approx. 6800mm/1700mm/2000mm, weight: approx. 4500kg, printed area: approx. 385000m². Including dye sublimation and workstation. Two print heads must be replaced. 2) Transfer calender Klieverik GTC81-3400, year of construction: 2009, working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Including low-voltage winder, year of construction: 2019, documentation available. On-site inspection is possible. Only package sale possible. Rsdpfxjv Tct Ij Af Usp

Condition: ready for operation (used), Year of construction: 2010, A Wilhelm Kneitz textile knitting system for the production of load securing fabrics is available. 1) Base machine Karl Mayer, year of manufacture: 2010, gauge: 1/6, output: approx. 350m²–500m²/8h, max. working width: 3250mm, installation area X/Y: 9000mm/9000mm, control: PGRS. Includes various wear parts and a new gearbox. 2) Base frame for a new machine with a working width of 8m. Includes all materials and finished goods currently in storage. It is likely that a frequency converter connected to the cutting system needs to be replaced. Documentation available. An on-site inspection is possible. Redoxpw Tkspfx Af Usp

Year of construction: 2016, condition: ready for operation (used), Various sewing and joining machines for upper finishing in the shoe manufacturing industry are available. 1) Plastic and leather welding machine Pfaff 8304-04247, year of manufacture: 1999, max. temperature: 700°C, max. welding speed: 20m/min, machine dimensions X/Y/Z: approx. 1150mm/750mm/1400mm, weight: approx. 130kg. 2) Heel closing ironing machine Elettrotecnica 443/V, year of manufacture: 2013, max. temperature: 180°C, heating time: 30s, machine dimensions X/Y/Z: approx. 1000mm/600mm/1350mm, weight: approx. 180kg. 3) Repair sewing machine Global SR 9929, year of manufacture: 2012, max. sewing speed: 2000stitches/min, max. stitch length: 8mm, presser foot lift: 14mm. 4) Flat ironing press Global WJ-62, year of manufacture: 2016, max. temperature: 200°C, heating time: 60s, working area X/Y: 380mm/380mm, weight: approx. 60kg. 5) Overlock machine Pfaff 918-49, needle: 1, threads: 3, stitch length range: 1mm-4mm, presser foot lift: 10mm, max. sewing speed: 4000stitches/min. 6) 2x rotary table ironing machines Sabal M 108-A, year of manufacture: 2014, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 300kg. 7) Strobel machine Strobel KL141-23, sewing system: single-needle chainstitch, stitch length range: 3.5mm-7mm, max. sewing speed: 1800stitches/min, weight: approx. 50kg. An on-site inspection is possible. Rjdpfxexnp R Ee Af Ujp

Year of construction: 2009, condition: ready for operation (used), A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible. Rjdpfxsxt Rm Se Af Uep

Year of construction: 1999, condition: ready for operation (used), A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible. Rsdpfxjwhp Nqs Af Uop

Condition: ready for operation (used), Year of construction: 1990, Numerous jigger dyeing machines from various manufacturers are available. 1) Mezzera 724320081-A, year of manufacture: 1990, bath volume: 2500l, roller width: 3500mm, max. fabric width: 3200mm. 2) Mezzera 724320081-B, year of manufacture: 1990, bath volume: 2500l, max. roller width: 3500mm, max. fabric width: 3200mm. 3) MCS 2716, year of manufacture: 1991, working width: 2700mm. 4) Henriksen VH Futura A 1200/2600, year of manufacture: 1998, modernization: 2016, max. batch diameter: 1200mm, roller working width: 2600mm, max. throughput capacity: 150m/min, control system: Sedomat 2600. 5) Henriksen VH 1000/3400, year of manufacture: 2014, working width: 3200mm, max. fabric length at thickness over 0.3mm: 2700mm, working speed: 150m/min, roller width: 3400mm, fabric width: 3200mm, heating medium: steam, steam consumption at 6bar: 292kg/h, control system: Sedomat 2500. 6) Thies type NT 2300, year of manufacture: 2015, max. working temperature: 98°C, max. fabric width: 2850mm, roller width: 3000mm, max. fabric length at thickness from 0.3mm: 3177mm. 7) MCS Maxi Jigger 98°, year of manufacture: 2021, batch liquor ratio: 1:2, roller diameter: 320mm, bottom roller diameter: 139.7mm. Documentation available. On site inspection is possible. Individual sale is possible. Rjdpfx Aeyhqb Hjf Uep

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Redpfxjyhqb To Af Uop

Year of construction: 2019, condition: ready for operation (used), A fully automatic rubberized 90° fitted sheet production line (fitted sheet) Automatex Canada is available. Orientation: W/L and L/L, material feed: unwinder, sewing heads: 4, sewing head distribution left/right: 2/2, end product: fitted sheet corners/box formation, corner angle: 90°. Including tension control, edge and web guiding, longitudinal hemming station with elastic band insertion, length measurement, cross cutting and conveying units. Documentation available. An on-site inspection is possible. Rsdpfx Afoyhqcqo Ujp