Used other textile machines for sale (67)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, overall weight: 2,500 kg, conveyor belt speed: 250 mm/s, conveyor belt width: 1,000 mm, temperature: 200 °C, machine/vehicle number: ST0403, production capacity: 240 unit/h, TECHNICAL DETAILS Number of conveyor belts: 1 Belt width: 1,000 mm Belt height: 830 mm Belt height adjustment: 50 mm Bsdpjzmr Ecjfx Adqodf Belt speed: 1–15 m/min Infeed length: 1,200 mm Length of heating zone: 3,000 mm Tunnel height: 100 mm Temperature: max. 200 °C Drying rate: 800–2,500 m³/min Outfeed length: 1,200 mm Output: max. 240 T-shirts/h MACHINE DETAILS Electrical voltage: 400 V AC Current: 16 A Mains frequency: 50/60 Hz Gas burner output: 1 × 55 kW Dimensions & Weight Dimensions (L x W x H): 5,400 x 1,300 x 1,700 mm Weight: 2,500 kg

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 1,200 mm, total height: 1,400 mm, overall weight: 250 kg, TECHNICAL DETAILS Number of nozzles: 13 Spray area: 1 × 3 m Number of tank connections: 4 MACHINE DETAILS Voltage supply: 1 × 230 V + N + PE Fuse rating: 16 A Connected load: 0.9 kVA Dimensions & Weight Bdodpfxezmr A Uo Adqef Machine dimensions: 3,000 × 1,200 × 1,400 mm Machine weight: 250 kg

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Bedpszqfx Defx Adqodf

Condition: ready for operation (used), Two Temafa bale opener lines are offered for bale opening, pneumatic conveying of fiber bales and processing of natural and synthetic fibers. 1. Bale opener: 1) Bale opener BÖ-KSP 0347, working width: 1600mm. 2) Rod conveyor table FTRY 0502, length: 5700mm, width: 1600mm. 3) Material extraction hopper, working width: 1600mm, pipe flange: 350mm. 4) AEG extraction fan, type: AM 160 MR 4, power: 11kW, speed: 1450rpm. 2. Bale opener: 1) Bale opener BÖ-KSP with Cleanmaster, working width: 1300mm. 2) Rod conveyor table, length: 5000mm, width: 1260mm. 3) Material diverter for feeding into the CMA or for direct discharge. 4) Cleanmaster (CMA) with infeed, tumbler and time-controlled discharge flap. 5) TV 300 extraction fan and auxiliary extraction fan for cleaning the CMA and for wool room extraction. 6) Control cabinet, year of manufacture: 1999, control system: Siemens S5 with Lauer terminal. Documentation available. The machines are available from April 2027. The machines can be purchased separately. An on-site inspection is possible. Bedeznx Nkspfx Adqedf

Condition: good (used), Reel, reel rod, trapezoidal thread spindle, spindle Bjdpfx Aoykp S Aedqsdf -Reel: Reel rod with quick-release fastener -Type: unfortunately without a type designation -Shaft: Ø 44 mm, dimensions see photos -Dimensions: Ø 98 x 440 mm -Weight: 3.3 kg

Condition: good (used), Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm Bsdsxyv Uhjpfx Adqodf -Weight: 13.8 kg/pc.

Year of construction: 1997, condition: excellent (used), Waste-box collector, waste collector, blower, fan, filter system, radial fan, dust extraction blower, fan, extraction, dust blower, extraction, dust blower, extraction system, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners Bdjdpfxsy Uxmxo Adqef -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Bdedozgui Depfx Adqsf Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Used machine, in good visual condition. Condition matches the photos.

Condition: good (used), Year of construction: 2003, operating hours: 80,000 h, functionality: fully functional, We are offering a Brückner ram machine manufactured in 2003, in good condition. If you have any questions or require further information, please feel free to send us a message or call us. Bjdpfx Aozphgnjdqodf

Condition: new, Microprocessor board for ED 260 coin acceptor. Bdodpfxezaa Ele Adqef

Condition: used, including scanner, power supply, and B&R industrial PC; a Jensen Metric system was installed at the time of decommissioning. Bjdpfx Adezazileqsdf

Condition: not inspected (used), Control unit for Böwe or Passat dryers. Bsdpfx Adjzaai Deqodf

Condition: ready for operation (used), Main drive unit of a Jensen Senking P72 SEW Eurodrive Bdodpfx Asy Ukq Ajdqsf K127 UV2001.4

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Bdodpezhntrofx Adqef

Year of construction: 2015, condition: used, functionality: unexamined, machine/vehicle number: 116.067.00, 2 Walzen Ramisch Guarneri calender, type RGK 280.2000, configured as an inline calender with expansion stages for double-sided Simili mercerization of Jacquard cotton fabrics: 2-steel roller system with unwinding and rewinding units, Maier rotary head (cooled version), moisturizing system after unwinding, centrally controlled and braked unwinding, metal detector, seam monitor, stationary introduction system (3 rollers) motorized for tension regulation, 2 cooling rollers, rewinding combination (large bobbin winder with center winder), crane runway above the unit, 2x Yale overhead cranes (manually movable via chain). The condition can be seen from the attached appraisal report. Bodpfsyiurrjx Adqedf

Condition: used, Stock of fabric and leather processing machinery (upholstery). Everything you see in the photo = 1000 Euro, transport excluded. Bdsdpfx Asy Ud Tksdqjf

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min Bedpfx Adeub Utqsqsdf motor type 90 L engine output 2,2 kW weight 35 kg

Year of construction: 2015, condition: excellent (used), coolant capacity 10 m3l/h Headroom 18 m operating pressure 2 bar Bjdpfjub Ur Tsx Adqjdf voltage 230/400 V - 50 Hz motor type 80 L motor speed 2900 U/min engine output 1,1 kW weight 33 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884

Year of construction: 1983, condition: used, Working width 3400 mm Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 18 to Bdodpfx Astv Iggedqsf Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive shaft dia 80 mm Hydraulic unit for separately pressure in inox Drive side links Operting side angeben • 2-Bowls-Finishing padder with 1 new swimming-roll (s-roll) and supporting roll; • new hydraulic control and pressure application for s-roll • drive motor and new electric control • machine will be completely refurbished before delivery • we grant a warranty for a period of 12 months

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L engine output 2,2 kW weight 35 kg Bsdpfx Aoub Utdsdqedf Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm Bjdpfow Tm Tijx Adqodf roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter 0 5 bar max. temperature 168 ° C range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works.

Condition: excellent (used), functionality: fully functional, Camoga C520L CE Surface splitter, walling machine – machine for splitting leather Bdsdezh Rcpjpfx Adqof - Working width: 520mm - Automatic knife positioning - Smooth adjustment of material feed - Material feed onto two rollers or onto a fixed bar at the top (optional, extra charge) - Machine equipped with a display showing the thickness of the split material - Automatic material retraction and adjustment of retraction length - Dust collector, powerful suction system and waste bin Complete manufacturer's documentation included with the machine Machine in perfect technical condition after a full service Price negotiable Delivery to the customer possible via Raben courier service More information available upon request

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1522, We are offering this well-maintained H&H AI 008 hot air taping machine, manufactured in 2015. Manufacturer: H&H Model: AI 008 Year of manufacture: 2015 Condition: good Category ID: 677 Type ID: 2467 Machine type: Hot air taping machine Bdjdpfxezdy Rbs Adqef If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is located at our production facility in Mönchengladbach and can be inspected and tested there during normal business hours. It was in use in our production facility until recently. It is perfectly suited for waterproof seam sealing.

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_06202P&C, type of input current: three-phase, total width: 2,200 mm, input voltage: 400 V, working width: 1,600 mm, YORK Single-Sheet Feeder The YORK single-sheet feeder features a top-twist material feeding system that allows the material to be fed directly into the automatic cutter, ensuring a continuous and efficient production flow. Bdedpfxoyh R Hto Adqef Precision and Technology The YORK single-sheet feeder is equipped with a full-color, multilingual touchscreen control panel and dedicated control software for accurate and intuitive operation. The system can be electronically synchronized with virtually any automatic cutting machine, providing precise feeding control, reliable performance, and seamless integration into automated production lines.

Condition: ready for operation (used), A Nagel + Hermann transfer and placement machine for transfer motifs (rhinestone, hotfix or similar) is available. Colors: unlimited, shapes: unlimited, production capacity: 5000elements/h, max. motif dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 820mm/650mm/650mm, weight: approx. 120kg. Including PC notebook, CAD software, 4x conveyor plates, 2x mounting plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Bsdpjzdul Tofx Adqsdf