Used weaving machines for sale (9)

Condition: ready for operation (used), Year of construction: 1991, A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible. Fodpfx Afexl Un Rs Depc

Condition: ready for operation (used), Year of construction: 2001, Five Picanol rapier weaving machines are available. Working width: 1900mm, weft colors: 8. Including 8 weft yarn feeders (feeders) and 8 heald frames. Documentation available. On-site inspection is possible. Fjdpfx Afjyhgn Ne Depc

Condition: good (used), Year of construction: 1987, functionality: fully functional, *FOR SALE AT OUR FACTORY *OPENING SYSTEM – STENTER FINISHING AND QUALITY CONTROL INCLUDED + POLISHING (DOUBLE BRUSH, PERVERATOR BRUSHES WITH BACK STEAM HEATING AND BEATER, METAL DETECTOR AT ENTRY, ENTRY STEAMING AND STEAM BOILER, 24 KNIFE ROWS 180 CM) *1 PCS OF MPS 22 LOOM, 4 PCS VMM/22/175 (TOTAL 4+1 PCS) MPS22 = PILE AND GROUND WARP ELECTRONIC LET-OFF / MECHANICAL DENSITY SYSTEM, 1987 MODEL /175 CM, 9-FRAME C-TYPE STEEL POWER (PILE-GROUND), WORKING FOR ELASTANE GARMENT, 180 REED, MECHANICAL JACQUARD VMM 22-175= 1990 MODEL MECHANICAL JACQUARD, ELECTRONIC DENSITY SYSTEM, ELECTRONIC PILE AND GROUND WARP LET-OFF, 12 FOOT (FRAME) STEEL POWER (PILE-GROUND), 124 REED, UPHOLSTERY VELVET *1 WARP BEAM STEEL HOOD TURNING CREEL 400 CAPACITY *1 PCS NUKSA KOPS TRANSFER (CONIC) 6 POSITIONS WITH METER COUNTER Fedpoyh E Hhefx Af Dopc

Condition: good (used), Year of construction: 1987, functionality: fully functional, HAV ground weaving loom with electronic warp release / mechanical density system. 1987 model / 175 cm. 9 frames, C-type steel construction (HAV ground). Operating for elastane garment production. 180 reeds. Mechanical dobby. Fedpeyh A Nmsfx Af Depc

Condition: like new (used), Year of construction: 2003, functionality: fully functional, for sale are several Fpodjv Hxq Aopfx Af Dec Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003 refurbished in 2024 like new for sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 Fsdpfx Afor I Am He Depc AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Fpodpfx Aer Ix Igsf Dsc Delivery on a Euro pallet, FOB Wuppertal

Condition: used, Year of construction: 1988, functionality: fully functional, For Sale: Several 6 pcs. Jakob Müller MVC 150s first generations are for sale: MVC 150 8/46mm 1988 88.60237 no. 309 MVC 150 8/46mm 1988 88.60085 no. 319 Fsdjv Hxltjpfx Af Dspc MVC 150 8/46mm 1988 88.60319 no. 332 MVC 150 10/36mm 1988 88.60041C no. 314 MVC 150 10/36mm 1988 88.60041B no. 313 MVC 150 6/66mm 1988 88.60000 no. 307 Year: 1988 Condition: well runnig and complete Price: €3,900

Condition: used, Year of construction: 1991, For sale 10x Jakob Müller Frick CH MVC 150 Müdata 4 Label Loom We only sell as a set for €50,000 Each loom €5,000 1989 in 12/30mm, To: 89.30018 Müdata 4, No. 70 1990 in 12/30mm, To: 90.30452 Müdata 4, No. 71 1990 in 12/30mm, To: 90.30370 Müdata 4, No. 72 1990 in 8/46mm, To: 90.30337 Müdata 4, No.325 1991 in 12/30mm, To: 91.30247 Müdata 4, No. 73 1990 in 7/57mm, To: 90.30166 Müdata 4, No. 76 1990 in 7/57mm, To: 90.30461 Müdata 4, No. 77 1990 in 9/36mm, To: 90.30371 Müdata 4, No. 78 Fpodpfx Aev T Nb Sof Djc 1990 in 9/36mm, To: 90.30080 Müdata 4, No. 79 1991 in 7/57mm, To: 91.30312 Müdata 4, No. 80 all looms are nice and well running