Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 450 mm, JUKI PS-800HB8045ZNZ – Programmable CNC Heavy Duty Sewing Machine – 800 × 450 mm For sale: JUKI PS-800HB8045ZNZ, an industrial, programmable CNC sewing machine in a Heavy Duty version, designed for precise sewing of technical fabrics, tapes, straps, and other textile products. The machine was manufactured in 2025 and has only approximately 200 operating hours. It is in very good visual and technical condition, practically like new. The unit is 100% functional, regularly serviced, and ready for immediate operation. The machine is located at our production facility in Gdańsk. It is possible to start it up, inspect it, and test it before purchase. Technical specifications * Manufacturer: JUKI * Model: PS-800HB8045ZNZ * Year of manufacture: 2025 * Operating hours: approximately 200 hours * Sewing area: 800 × 450 mm * Version: Heavy Duty – for sewing heavier materials * Control: electronic, programmable CNC * Automatic thread trimming * Sewing pattern programming * Control panel for operation and pattern programming * Possibility of importing patterns via USB * High accuracy and repeatability of sewing Additional equipment included in the price of the machine * Lower thread end sensor * Dedicated cassette / tooling for sewing MOLLE systems * Dedicated cassette / tooling for sewing mesh The additional tooling allows the machine to be used in the production of specialized textile products. Applications The JUKI PS-800HB8045ZNZ is ideally suited for the production of: * Tactical and military equipment * MOLLE systems * Backpacks, vests, and protective gear * Technical tapes and straps * Industrial textiles * Industrial filters * Mesh components * Other products requiring precise, repeatable sewing according to a programmed pattern Thanks to its large working area of 800 × 450 mm and the ability to program patterns, the machine is suitable for both serial production and the execution of specialized sewing operations. Technical condition The machine is used but is in near-new condition. * Fully functional * Very low operating hours – approximately 200 hours * Regularly serviced * Ready for immediate operation * Can be inspected during operation before purchase Location and sales conditions Location: Gdańsk, Poland The machine is available immediately. Delhjz Dk Eyecdw Hsku It is possible to view and test the unit at our production facility after prior arrangement. Sale is based on a VAT invoice. We can provide assistance with loading the machine. Additional photos and a video showing the machine in operation are available upon request.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Dolez Ibdujhcdw Hoku Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: MPT-DL Type: Trouser press Year of manufacture: 2024 Used, with minor signs of wear, in good condition From a business liquidation Technical data according to the manufacturer For example, for jeans, sports pants, and classic trousers Prepared for connection to an external steam source With pneumatic waistband and trouser leg clamping Transverse/perpendicular waistband clamping With microprocessor and display with 10 storable programs, automatic and adjustable cycles, to be activated when the left trouser leg clamp is closed, or via foot pedal if the slider of the trouser leg clamping device is switched off or not available 1.7 HP fan Dkolhcdoz Ibflsw Heu Prepared for connection to compressed air Photoelectric cell Connection: 400 V / 3+N / 50 Hz Dimensions (W x D x H): approx. 80 x 90 x 200 cm Weight: 150 kg Inspection or collection is possible by appointment.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2D3BF00270, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This premium lot consists of four JUKI DLN-5410 series industrial needle-feed lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI DLN-5410N-7 is one of the world's most respected industrial needle-feed lockstitch sewing machines, renowned for its exceptional reliability, high sewing speeds and outstanding stitch quality. Its needle-feed mechanism synchronizes the movement of the needle with the feed dog, significantly reducing material slippage, seam puckering and ply shifting compared to conventional drop-feed machines. Ideal for denim manufacturing, workwear, uniforms, technical garments and other medium-weight industrial sewing applications. Bundle Contents Machine 1 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 23A-7222 Manufacturing Number: 2D3BE00023 Machine 2 Model: JUKI DLN-5410N-7 Year: 1999 Internal Reference: 26A-7003 Manufacturing Number: 2D3BF00270 Machine 3 Model: JUKI DLN-5410N-7 Djlhcdwszmy Aco Hjku Year: 2009 Internal Reference: 27A-7226 Manufacturing Number: 2D3BE00024 Machine 4 Model: JUKI DLN-5410-7 Year: 2009 Internal Reference: 17B-7224 Manufacturing Number: DLNAJ38908 Technical Specifications Manufacturer: JUKI Corporation Model Series: DLN-5410N-7 (3 machines) / DLN-5410-7 (1 machine) Machine Type: Industrial Single Needle Needle Feed Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Maximum Stitch Length: 4.0 mm Needle System: DB×1 Presser Foot Lift: 5.5 mm by hand / 13 mm by knee lifter Feed Mechanism: Needle Feed with Bottom Feed Lubrication System: Fully Automatic Centralized Lubrication Integrated Electronic Control System Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Table and Heavy-Duty Steel Stand Production Benefits • Needle-feed system minimizes material slippage and seam distortion • Excellent stitch quality on multi-layer fabrics • Consistent seam appearance at high sewing speeds • High productivity in continuous industrial operation • Reliable Japanese engineering • Proven long-term durability in professional garment manufacturing Why Purchase This Lot • Four matching production machines from the same factory • All machines used on the same production line • Consistent sewing quality across all workstations • Common spare parts inventory • Simplified maintenance procedures • Reduced operator training requirements • Cost-effective way to establish or expand a production line Applications • Denim manufacturing • Jeans production • Workwear • Uniform production • Technical garments • Medium-weight woven fabrics • Shirt manufacturing • Industrial garment production Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2021, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: NRGL614.01025, type of input current: AC, total width: 3,340 mm, input voltage: 400 V, input current: 19 A, SEI NRGL 1612 V300 – 300 W Industrial CO₂ Laser Cutter with Automatic Material Loader – Operational Dkolhozcny Ascdw Hou Industrial SEI NRGL 1612 V300 laser cutting system for sale. Manufactured in 2021 and equipped with a 300 W CO₂ laser source and material loading system. The machine is fully operational and available for inspection. Approximately 10,000 operating hours. Key Features: • SEI NRGL 1612 V300 • Year: 2021 • 300 W CO₂ laser • Working area: 1600 × 1200 mm • Automatic material loader included • Approx. 10,000 operating hours • Operational and available for testing • Located in Munich Germany Suitable for industrial processing of acrylic, textiles, technical fabrics, wood, paper, cardboard, and other non-metal materials. Price: €40,000 VB Additional photos, videos, technical documentation, and inspection appointments available upon request. Transportation not included, can be discussed defined and agreed.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances. Dkjlhcdez Atvujw Heu

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Dslez E S Hhehcdw Heku Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Manufactured in 2003, this machine remains in excellent technical condition thanks to proper maintenance and care. It offers a versatile configuration with a working width of 1,900 mm. The line is equipped with: • Raw material unwinding stations • J-box for face materials • Powder scattering unit • IR heating station • Lamination head • Cooling system • Tension control system • Central winding unit A key feature is the additional upper pressing roller, which enables the production of 3-ply laminated composites in a single pass. Dkjlhcjz E S H Iodw Heu Depending on the application, the machine can bond layers using thermoplastic adhesive supplied in roll form, thermoplastic powder, or a combination of both.

Condition: excellent (used), Year of construction: 2017, operating hours: 6,100 h, Used Lectra Vector VT-FA-iQ50-71 automatic cutting machine, year 2017, effective cutting width: 180 cm, maximum thickness: 5 cm, operating hours: 6100, with traversing table. The machine does not have a software license, so it is necessary to contact Lectra to obtain a new software license and training. The machine is in excellent condition. Djlez D Nkbshcdw Hjku

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 200 mm, compressed air connection: 6 bar, Bullmer fabric spreading machine Eco2, including a 6-meter conveyor table. The machine is located in the Münsterland region. Djlhcdez Apz Hsw Hoku

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Dkslhcdsznlbysw Hju Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2MOBG00099, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, This lot consists of five JUKI MO-6900 series industrial overlock / safety-stitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI MO-6900 series is JUKI's high-end overlock platform, valued worldwide for high sewing speeds, excellent seam quality and long service life in continuous industrial operation. The lot includes both 1-needle overlock (MO-6904) and 2-needle safety-stitch (MO-6916) configurations. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched set with common operating principles, shared spare parts inventory and simplified maintenance. These machines are ideally suited for denim manufacturing, jeans assembly, workwear, knitwear and other applications requiring fast, durable overedging and safety-stitch seams. Bundle Contents Machine 1 Model: JUKI MO-6916R Internal Reference: 62B-V109 Machine 2 Model: JUKI MO-6916R Class: FF6-50H Internal Reference: 9-NoNr Machine 3 Model: JUKI MO-6904S Class: OF6-300 Internal Reference: 89B-7190 Manufacturing Number: 2M0BG00099 Machine 4 Model: JUKI MO-6916 (MO-6900 Series) Year: 2009 Internal Reference: 123A-H79 Machine 5 Model: JUKI MO-6916-12 Year: 2009 Internal Reference: 132A-K536 Technical Specifications Manufacturer: JUKI Corporation Model Series: MO-6916R (2 machines) / MO-6904S / MO-6916 / MO-6916-12 Machine Type: Industrial Overlock / Safety Stitch Sewing Machine Country of Manufacture: Japan 1-Needle Overlock and 2-Needle Safety Stitch Configurations Maximum Sewing Speed: Up to 7,000 stitches per minute (model-dependent) Built-In Fabric Trimming Knife System Automatic Lubrication Djlsznz Shjhcdw Hoku Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched MO-6900 series production set • High-speed overedging and safety-stitch seaming • Excellent seam quality on denim and heavy fabrics • Reliable performance during continuous production • Common spare parts across the production cell • Proven Japanese engineering and long-term durability Why Purchase This Lot • Five professional JUKI MO-6900 series machines • Matching machines from one factory • Complete safety-stitch capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion • Excellent investment for denim and workwear manufacturers Applications • Jeans production • Denim manufacturing • Inseam and side-seam safety stitching • Seam serging and overedging • Workwear manufacturing • Uniform production • Knitwear and jersey garments • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications Dslhcdwey Au Alj Hoku • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dkjlhcdjznyx How Hsu Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 678, functionality: fully functional, power: 1,400 kW (1,903.47 HP), input voltage: 380 V, input frequency: 5,060 Hz, type of input current: three-phase, table width: 400 mm, table length: 500 mm, total length: 1,700 mm, total width: 2,100 mm, total height: 1,500 mm, overall weight: 1,300 kg, Equipment: CE marking, safety light barrier, Transmatic CA 1000 – 6 Stations (late 2019 model) This is an automatic rotating carousel heat press in excellent condition – almost like new – with very few operating hours. The machine is fully operational and is still installed in our production line, maintained to professional factory standards. It offers high efficiency and productivity, capable of producing approximately 7,500 pieces per day with only 2 operators, making it ideal for companies focused on transfer printing and high-volume textile applications. Key Features: - Automatic 6-station rotating carousel system - Very low usage (limited production hours) - Plate dimensions (50cm x 40cm) - High production capacity (~7,500 pieces/day with 2 operators) - Precise control of temperature, pressure, and timing - Reliable and consistent output Dslhcdwjzi Sm So Hjku - No additional investment required – ready for immediate use.

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. Dkslhcjz E S Ilsdw Hsu 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 9128, working width: 600 mm, total width: 800 mm, pressure: 6 bar, overall weight: 320 kg, compressed air connection: 6 bar, input current: 1 A, input frequency: 50 Hz, input voltage: 230 V, total height: 1,500 mm, total length: 1,000 mm, type of input current: AC, power: 0.15 kW (0.20 HP), Equipment: CE marking, VEIT BRISAY BRI-2390/211 Industrial Garment Ironing Press (2011) Professional Pneumatic Steam Ironing Press for Trousers, Denim & Garment Finishing The VEIT BRISAY BRI-2390/211 is a premium German-built industrial ironing press designed for high-quality garment finishing in demanding production environments. Manufactured by BRISAY Maschinen GmbH, part of the renowned VEIT Group, this machine combines pneumatic operation with steam-heated pressing technology to deliver consistent, professional pressing results. This machine was used in the former MASI JEANS factory for finishing denim garments and trousers before shipment. It remained in daily production until the factory closure and represents an excellent opportunity for garment manufacturers, laundries, textile finishing companies, or industrial pressing operations. The ergonomically designed foot-pedal operation allows fast, repeatable production while reducing operator fatigue. The shaped upper and lower bucks make the machine particularly suitable for pressing trouser tops, waist areas and similarly contoured garment sections. Technical Specifications Manufacturer: BRISAY Maschinen GmbH (VEIT Group), Germany Model: BRI-2390/211 Modification: 026 Machine Number: 9128 Year of Manufacture: 2011 Power Supply: 230 V, 50–60 Hz Electrical Power: 0.15 kW Current: 0.7 A Compressed Air: 0.6 MPa Steam Pressure: 0.45–0.60 MPa Condensate Pressure: Max. 0.05 MPa Weight: 320 kg Certification: CE marked Key Features • Premium German industrial quality from VEIT Group Dslhcdozpax Asw Hjku • Pneumatic foot-pedal operation • Steam-heated upper and lower padded pressing bucks • Designed for continuous production environments • Consistent pressing pressure for repeatable quality • Ergonomic operation for reduced operator fatigue • Heavy-duty industrial construction • Excellent choice for garment manufacturers and textile finishing facilities Typical Applications • Trouser top pressing • Denim garment finishing • Jeans production • Workwear finishing • Uniform production • Jacket and garment pressing • Textile finishing operations • Industrial laundries • Commercial garment processing Condition Previously used in professional garment manufacturing. The machine remained in production until the closure of the MASI JEANS factory and shows normal cosmetic wear consistent with industrial use. Overall condition is good, and inspection is welcome prior to purchase. Video available. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Dolszgw Ebehcdw Hoku Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing Dkjlhjy Ipy Ascdw Hsu • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We are offering several Dürkopp Adler industrial automatic pocket sewing machines from our garment production facility. The machines are designed for the automatic production of piped, flap, and welt pockets and are suitable for industrial trouser, jacket, and garment production. Machines available: • Dürkopp Adler 739 991001 K3 – BVL Automatic 2015 • Dürkopp Adler 745-34-2A – Piped/Welt Pocket Automatic – 30 mm – 2 units • Dürkopp Adler 745-34-2B – Automatic Pocket Sewing Machine – 10/16 mm • Dürkopp Adler 1970 Automatic Sewing Unit for attaching pocket facings The Dürkopp Adler 745 series is designed for the automatic sewing of piped pockets, flap pockets, and welt pocket openings. Depending on the machine configuration, the units are equipped for different pocket widths and production applications. The machines come from an industrial garment factory and were used in professional production. Important: This advertisement covers several machines. The main machine advertised is the Dürkopp Adler 745-34-2B, but the other machines listed above are also available for sale individually or as a package. Photos in the advertisement show the different machines currently available. Location: Romania Dkolhcozzkursdw Hju Quantity: Multiple machines available Sale: Individual machines or complete package Price: On request / depending on machine and quantity Inspection of the machines can be arranged. For serious buyers, additional photos, machine identification details, and videos can be provided upon request. We are open to offers for individual machines as well as for the complete package.

Year of construction: 2010, condition: used, functionality: fully functional, The Klieverik GTC81/1850SP FLOWLINE is designed for efficient single-piece transfer printing, but also supports cut sheet repeat jobs and roll-to-roll transfer printing. Delozaq E Nshcdw Heku Maximum material width: 1650mm Speed: 0.1-2 m/s Drum: 195mm Maximum temperature: 220°C We use it very little, and it is in very good condition.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1915, Oteman Delta P03K Quick automatic fabric spreading machine with spreading table, built 2003 in Igualada (Barcelona). In working order. TECHNICAL DATA Manufacturer: Oteman S.A., Igualada (Barcelona), Spain Model: P03K Quick Serial number: 1915 Year of construction: 2003 Maximum working width: 1,800 mm Maximum load: 80 kg Maximum roll diameter: 600 mm Maximum speed: 2 m/sec Power: 2 kW Voltage: 380 V three-phase Current: 10 A Frequency: 50/60 Hz Machine weight: 498 kg Control: Delta + JT Kombi programmable controller Spreading table: included, with travelling rails Condition: in working order The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Dkslez At Scjhcdw Hou Machine owned by the seller, free of encumbrances.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet Dkolszvht Iehcdw Hju CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request.

Year of construction: 2014, condition: excellent (used), Double finisher 842 Multimatic with control, manufactured in 08/2014, original price €20,110. Garment shaper and pant finisher rotatable on a single column. Finishing process in a closed cabin. Integrated cabin extraction system, automatically controlled. Doors close automatically. Flexible processing of different garments and sizes. Computer control with nine freely programmable memory locations. Airflow regulation for particularly delicate garments. Space-saving and virtually no emissions in the working area during the finishing process. Heated by external steam or fully electric with a built-in electric steam generator. Are you looking for an all-in-one solution for jackets and other items? - Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, blazers, coats, trousers, and similar items can be automatically finished. It consists of a form finisher and a pant finisher. The two devices are rotatably mounted on a single column. To finish, the previously loaded element (form finisher or topper) is swung into a cabin. The doors close automatically, and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low noise, and minimal space requirements. Manufactured in 08/2014, original price €20,110. The machine is in perfect working order. Dkelhcdjgtidhsw Heu More items – new and used – can be found in our shop! International shipping costs on request!

Condition: repair required (used), Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a high-performance textile printing machine that offers outstanding print quality, high speed, and versatility. It is particularly suitable for textile printing companies that want to produce top-quality prints in large quantities (roll-to-roll) on a wide variety of fabrics. Up to now, it has primarily been used for printing cotton fabrics: jersey, French terry, cotton woven fabric, canvas, sweatshirt fabric, and viscose & modal qualities. It is being sold due to a business downsizing. The textile printing machine is currently still in operation and can be inspected at any time by appointment. We are still printing fabrics with it. However, the machine would need to be serviced – the slave PC is slow, and the color channels would need to be reworked. The following items are included with the machine: dryer, unwinder, and rewinder. In other words, a complete production line. In addition, we will also include all remaining spare parts, inks, etc. IT IS BEST SUITED AS A SPARE PARTS STORE, IF PARTS ARE MISSING,... Technical data: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, Magenta, Yellow, Black, Red, Green, Gray Print heads: 64 x Spectra Polaris, recirculating – (7 color channels, 1 channel for pretreatment) Print width up to 180 cm Printing speed: Up to 200 m²/hour Printing modes: Several printing modes from 400-1200 dpi Recommended printing mode: 600 x 600 dpi in 6 passes using the staggered line printing method Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveying system Fabric feed system: Axial unwinding device with adjustable fabric width and tensioning mechanisms Dkslhovmdw Iscdw Hsu Max. media thickness: 15 mm Max. roll width 180 cm Max. roll outer diameter: 40 cm Max. roll weight: 50 kg Compressed air: 6-8 bar / < 0.4 m³/min IF THE MACHINE IS TO BE PUT BACK INTO PRODUCTION, IT WOULD BE RECOMMENDED TO HAVE THE MACHINE OVERHAULED AND REBUILT/SERVICED BY KORNIT – THE BUYER WILL BE RESPONSIBLE FOR THESE COSTS!