Used screen printing machine for sale (107)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Thieme model 3050L screen printing machine, fully refurbished. Format: 140x180 Year: 2007 Condition: Final stage of refurbishment Nksdpfx Afoxk T D Ie Usu Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacturing of UV (electronic) or hot air tunnels.

Condition: excellent (used), Year of construction: 2013, Screen printing dryer Acosgraf Infradryer TS3010 perfect for plastisol inks, quick curing 350-500 pieces an hour Low energy consumption Nkjdpfxjxtwtxo Af Uju year 2013 27kw air circulation exhaust blower 3 different heating zones belt 100cm wide heat length 3 meters Très bon état

Condition: excellent (used), Year of construction: 2013, Machine ROQPRINT BASIC P10C08M year 2013. 10 pallets 8 colors very good condition, slightly used. with 2 flashes 9kw. 2 sets of pallets (40x60cm et 30x60cm - 10 each) Nkjdpfjxtwtljx Af Uou Many squeegees and floobars We can ship and install (quotation to be made)

Condition: excellent (used), Year of construction: 2002, Tiflex 6-pallet / 6-color manual screen printing press, Ref. 2368000LC, Ready to use for screen printing. Good condition, cleaned and checked. - Micrometric adjustment of the screen on the X and Y axes via 3 knurled knobs - Front/rear adjustment of the platen - Adjustment of the screen's contact with the platen - Frame parallelism adjustment Includes several press plates: Nodoxrbqxspfx Af Ujku 6: 66 x 48 cm plates 6: 50 x 32 cm plates 2: 40 x 22 cm plates 1: 40 x 15 cm platen 1: 60 x 15 cm platen Delivery not included.

Condition: new, Year of construction: 2024, Combined Exposure Unit, Model 4, 120x145, 3.5kW Nkjdpfxsh Tym Is Af Usu Max. screen size: 120x145cm, floor space: approx. 250x 190cm, MH quick-start lamp: 3.5kW, connection: 400V/50cycles, CEE-plug, 32ampere. consisting of steel-tube support with storage board, with 4retractable drawers, with pull-out rails for various sizes of screens, vacuum copying frame with flexible rubber blanket on top, easier lifting of the glass upper frame by gas springs, height-adjustable cross-beam on top with hanging MH exposure lamp model AKTICOP S as well as UV-protection curtain, with light dosing device model AKTITRON S16E, 16programs, equipped with light sensor at the copying frame. Control board at the drying cabinet with vacuum gauge, vacuum reducing valve, operating and control elements.

Condition: new, Year of construction: 2024, Manual Screen Washer, Model 4: 150x220 Nsdpfeh Tym Ssx Af Ueku For max. screen size: 150x220cm, 400V, 50Hz. The unit is ex-protected. The control box ist not ex-protected and must be mounted according to the rules at least 5m away from the unit or must be separated from the unit by a fire-proof wall. Made of aluminium, compl. with solvents storage tank, pump, brush, 380/400V.

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods! Nkjdpoh Tyrwofx Af Uju

Condition: as good as new (ex-display), Semi-automatic Universal Screen Printing Machine TIC SCF 550 DHE Flat and rotary printing machine, floor-standing model, printing format 300 x 450 mm or printing diameter 160 x 300 mm, max. screen frame size 730 x 530 x 30 mm. Machine comes with base frame and height-adjustable feed table with XY-adjustment capabilities. Height adjustment of feed table approx. 300 mm, allowing a max. print object height of approx. 450 mm. Upper frame with continuous lateral safety guard, equipped with 2 squeegee sets, requires 6 bar compressed air, connection: 230V, 50Hz. Unused demonstration model. Electro-pneumatically controlled machine with microprocessor control. Flatbed printing with T-slot table plate (option: vacuum table plate with vacuum pump), rotary printing with universal holder for cylindrical items as well as rack-and-pinion drive for multi-color printing, including inflation device. In setup mode, print movement can be adjusted individually. Squeegee stroke, squeegee pressure and flood coater are steplessly adjustable. Nkodpfx Asw N N Iusf Ueu

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Nkodpfxjh Tymrs Af Uju Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place.

Condition: new, Year of construction: 2023, Infrared Dryer IR-TEX MINI, 700mm Nkodpsh Tyw Ajfx Af Usu Belt width: 700mm, spot width: 500mm, cover length: 1m, total length: 1.8m, heating: 4 kW, connection: 400V, 50Hz Infrared drying channel for textiles with ceramic spots, Teflon-coated belt, electronic conveyor control, heating variable via Digi-Thermo, suitable for a small number of items, compact construction, insulated cover.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Nkedpfx Afsd I T Exj Uou Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2023, Semi-Autom. Screen Printing Machine TIC SC1000 OptiPass Nedpfxjhrdn Io Af Uoku Curve printing machine, stand model, printing size: 200x700mm or printing ø: 600x700mm (Attention: when ø 600mm no 360° all-round printing possible), max. screen frame size: 930x530x30mm. Machine with base frame and height-adjustable feeding table incl. x/y-adjustment. Height adjustment of the feeding table: approx. 250mm, therefore max. height of the printing object: approx. 600mm. With safety frame all-around the sides of the upper frame, equipped with 2sets of squeegee, motor-controlled lateral frame movement for curve printing and rotation of the printing object, machine control via touch-panel, registering by optical sensor, when printing in multi-colour-mode register accuracy is approx. 1mm, drive components 'Made in Japan', compressed air connection: 6bar, supply voltage: 230V, 50Hz Electro-pneumatic machine, micro-processor control. Curve printing machine with universal reception for cylindrical objects as well as optical fitting system for multi-colour printing, with inflation device, printing movements separately adjustable during set-up operation, squeegee stroke, squeegee speed and floodbar infinitely adjustable Delivery time 16-18 weeks

Condition: new, Year of construction: 2022, machine/vehicle number: 20b015, Fully Automatic Printing Tower for Crate Printing on 4sides Electro pneumatically controlled fully-automatic screen printing machine for rotary printing, with microprocessor control, equipped with feed, printing and ejector station, pneumatic squeegee pressure adjustable via manometer, pneumatic squeegee switching, with squeegee quick clamping system, squeegee stroke, adjustable squeegee pressure. Printing movements individually adjustable when working in one-shift operation. All four sides of the crate will be printed at the same time in different colours and motivs. 800crates per hour enable a precise reproduction ability and a high productivity. Special hose pumps apply the ink onto the horizontal positioned screen frames. In that way each side of the crate gets an even ink application. The screens can be exchanged within minutes which, in turn, reduces the holding time. The multi-functional system of the printing tower makes a change of both logo and ink possible within short time thus enabling short set-up times. Nedpsihccfofx Af Ujku A modern electronic control via display ensures the requested process control and helps analysing any faults. The step-by-step operation mode show the printing status during the automatic production run resp. during the set-up by the operator.

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition. Njdpfxjw N N Arj Af Uoku

Condition: as good as new (ex-display), Year of construction: 2024, Semi-Automatic Universal Screen Printing Machine SFM 650 DHE Flat printing machine with parallel liftin gupper frame, printing size: 400x600mm, with motor squeegee motion and height-adjustable feeding table incl. x/y-adjustment, adjustable slot stone printing bed 650x950mm. Height adjustment of the feeding table: approx. 300mm, max. height of the printing object: approx. 450mm. Machine with base frame and safety bar sideways, required compressed air: 6bar, supply voltage: 230V, 50Hz. Electro-pneumatic machine, micro-processor control. Screen printing machine for flat printing, with slot stone printing bed (option: vacuum printing bed with vacuum pump), printing movements during set-up operation separately adjustable, squeegee stroke, squeegee pressure and floodbar infinitely adjustable. Delivery time 2-3 weeks Njdpfxjc Nf Hue Af Ueku

Condition: new, Year of construction: 2025, Screen printing exposure machine: UV - LED from MTP, model S-LED 4000 (New) Machine for preparing screen printing silkscreen, robust and reliable. Easy to use, low energy consumption. LED source: 400W Fast vacuum pump (20/30s to create a vacuum) Maximum screen size: 83 cm x 63cm Digital timer for vacuuming + exposure time Supplied with its chassis (to be assembled) Very simple operation, exposure time of 1 to 2 mins Nkodpolgvlrefx Af Ueu UV LED exposure chassis, vacuum pump included. Support included. Price €2,390 excluding VAT - Delivery not included 1 year warranty. AVAILABLE IN MARCH 2025 screen printing, screen printing workshop, screen printing ink, screen printing, screen printing art. screen printing workshop, screen printing frame, screen printing training, screen printing equipment. screen printing, screen printing exposure machine, screen printing bordeaux, screen printing typon. screen printing company, screen printing machine, industrial screen printing, screen printing machine. home screen printing, screen printing company, screen printing printer, screen printing on wood. screen printing painting, artisanal screen printing, artist screen printing, technical screen printing. screen printing typon printer, textile screen printing, screen printing spatula, manual screen printing carousel. screen printing film printer, automatic screen printing machine, garment screen printing machine. screen printing used equipment. Textile ink. Solvent cleaner, Photographic emulsion. Screen printing emulsion. Emulsions for coating screen printing screens. Textile emulsion. Diazo emulsion for water-based inks, High-quality screen printing emulsion, water and plastisol inks. Products for screen manufacturing Screen printing exposure unit, emulsion, exposure frame, Vacuum exposure unit, Exposure frame. UV exposure unit, Exposure unit, Exposure bench, UV exposure unit for screen printing, UV screen printing exposure light. screen printing exposure unit, cyanotype exposure unit, uv led exposure unit, screen printing exposure kit, screen printing frame manufacturing

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, total length: 3,000 mm, total width: 1,500 mm, total height: 2,200 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 1,500 kg, 1. very precise, fully automatic screen printing machine with an automatic feeder feeder that positions the sheet with an accuracy of 0.08mm. The integrated CCD camera recognizes a hole or a print mark and positions the screen with an accuracy of 0.02mm to the print mark. Nkedpfjqu Udwjx Af Uou 2. welded steel frame and highly dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, controlled pneumatic squeegee pressure compensation, which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material. 6. the material is kept in a floating state during application and removal, which guarantees scratch-free transportation.

Condition: used, Year of construction: 2007, functionality: unexamined, total length: 6,100 mm, total width: 3,700 mm, Used screen printing machine CNC Balsfulland 100 with 4 print units. Installation of a UV lamp holder in place of the 4th print unit Nkodpjxt Urxsfx Af Uju 1 pc. UV lamp Manufacturer: UVITERNO Type: Mono DSK-SE 7525 with EVO-Plus incl. exhaust fan Lamp length: 200 mm Lamp power: 200 W/cm 1 pc. external pretreatment station Manufacturer: GST, Type: VSP, Year of construction 2017 Consisting of: Curve conveyor belt with robust steel base frame and SEW drive motor Hill burner system with 1 burner, burner length: 200 mm Lifting and turning station, servo-pneumatic Siemens S7 control with touch display Safety device

Condition: good (used), Year of construction: 1997, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Star G2 - Machine type: screen printing machine - Year of manufacture: 1997 - Equipment: • Mabeg feeder, model MS • SPS dryer, type UV Top 1200, year 1993 Nedpfxoxby Smo Af Uoku • SPS Rehmus stacking unit, type Autostack S-02, year 1993 • Steel platform and tread plate on pallets • Control cabinet • Screen printing frames - Area of application: industrial screen printing, packaging, labels, special applications

Condition: good (used), Year of construction: 2001, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Multistar G2/C - Machine type: Screen printing machine (complete system) - Year of manufacture: 2001 - Equipment: • SPS feeder unit Nodexby S Hopfx Af Ueku • SPS dryer, model TS-M2, year 2001 • SPS stacking/declaration unit, model Autostack ASR 61+G2, year 2001 • Steel platform and chequer plate on pallets • Control cabinets - Fields of application: industrial screen printing, packaging, labels, special print jobs

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, SAKURAI MAESTRO MS-102AII. (2005) Maximum sheet size: 1050 x 750 mm Minimum sheet size: 420 x 297 mm. Maximum printing size: 1050 x 730 mm Sheet thickness: 0.075-0.8 mm Maximum feeder height: 675 mm. Maximum feeder capacity: 600 kg Speed (feeder): 400 - 3,000 sheets per hour. Screen frame outer dimensions: 1300 x 1170 mm Length: 3,816 mm Width: 3,080 mm Height: 1,199 mm Nkodpfjw N N Hdjx Af Uou

Condition: used, Screen printer, manufactured by Rehm Thermal Systems GmbH Type: RDS 3800/500 G Power: 38 kW System description: • in the front area, ceramics are printed via a rotary indexing table • they are then transported via a shuttle into the approx. 20 meter long continuous furnace • temperature: 120 °C Nsdpswbt Ecofx Af Usku • at the end of the furnace, the ceramics are removed and sorted back into the magazines

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Njdpjr Izhujfx Af Usku Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: TIG-230006, For sale: Kornit Smart Textile Dryer TITAN – a professional machine designed for industrial curing of prints. The drying tunnel is fully operational, regularly serviced, and ready for integration into a production line. - High throughput capacity - Stable drying temperature Nkodpsxvq I Isfx Af Usu - Ideal for DTG and screen printing production - Intelligent software supports operation of up to 3 Kornit Atlas Max printers

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Reconditioned machine Nedsfz Nwrjpfx Af Ujku Semi-automatic screen printing machine with parallel lift Printec TP 500 print size 550 x 300 mm vacuum table, very good condition