Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Channel baling press Paal Konti 200 D, year of manufacture 2000 Technical data: Manufacturer: Paal Type: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-way automatic Throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (L x W x H) Machine weight approx. 15,000 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: Bsdpfxoz A T Nle Aa Tedh All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Fourfold wire tying of bales Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling opening (mm): 1200 x 565 Bedpfx Asra Ak Eoa Tsdh Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Vertical baler Hsm V press 500.2 VL Year of manufacture: 2004-2008 Price: 3,500 EUR Transport height: 2600 mm

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Bdodpfx Aaey D Dr Se Toh Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: defective spare-parts repository (used), Year of construction: 2017, Year of manufacture 2017 25 m³ Bdedeytf Avjpfx Aa Toh without doors

Condition: good (used), Year of construction: 2015, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Bdjdpfxsz A T E Ho Aa Teh Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Weight of one bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Bdjdjra Dddspfx Aa Toh Design features large loading opening for cardboard option for automatic feeding (e.g., with a conveyor) manual wire tying (4 wires) pallet lock and hydraulic door for bale removal Advantages of this press large bales – fewer transports high crushing force designed for continuous operation Available model years: 2017-2020

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Model: HT30036 Vintage: 1996 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Bdedpfx Ajm Amk Noa Teh Baling chamber: 1600 x 760

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Well-maintained Bramidan baler for high-volume waste compacting. Bjdpszhnpyofx Aa Tedh

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Bedpfx Aoyq Ngtea Tedh

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Presto HG20R Press container for hooklift vehicles Bdedpfx Aox Svx Tsa Toh 20 cbm usable volume Discharge door hinged at the top Hooks on both sides Split lid over filling opening, opens left/right Prepared for ramp operation Machines are refurbished, inspected, serviced and repainted in your desired standard RAL colour. We are happy to provide you with an offer including delivery. Pictures are reference images of machines of the same type built by us.

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Bedpfxjx D U N Ss Aa Todh Model: HL 4010 Year of manufacture: 2012

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Bodpfx Ajzxqmioa Tjdh Pressing force: 40 t

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 1 SMICON belt separator incl. screw conveyor incl. 1 screw conveyor The BS260 belt separator is suitable for unpacking small quantities and batches of food products. Particularly suitable for kneadable and water-containing products packed in plastic. Unpackaged organic waste can also be pressed into a pulp. In addition to its function as a depackaging machine, the belt separator can also be used to subject the organic dimensions of other depackaging systems to further or renewed cleaning and separation of moist and liquid components. Screw lengths in mm: 1 x 3800 Screw conveyor specifications: - 304 stainless steel design - Trough plate RVS-304 3 mm. Bdjdpfx Aettr Alea Tsh - Trough with cover made of stainless steel -304, closed with screws - executed with stainless steel plate with hard steel strips. - Construction not painted - Spiral type: Steel spiral (without shaft) - Shaft seal: Stuffing box with stainless steel housing and stuffing box - fastened with anchor bolts - Control integrated in BS 260

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Pressing force: 40 t Bedpfxszxqnmo Aa Tjdh

Condition: good (used), functionality: fully functional, Main motor and two hydraulic pumps for a BOA hydraulic press, in good condition, for sale. The machine was taken out of service due to an electrical fault in the control system. Afterwards, the components mentioned above were removed, as they are still fully functional. Bsdjzxzcbopfx Aa Tjdh Please contact me privately for further information.

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 machine for sale. The machine underwent its last maintenance check in March 2026, during which no significant issues were identified. The machine is fully functional and has since been taken out of production. It is in good condition and is currently located in France. Technical specifications of the machine: Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approx. 500 kg Number of binding wires: 5 vertical Dimensions of feeding hopper: 1420 x 972 mm Weight of press: approx. 18 tons Noise level: < 85 dB(A) Bedpfx Ajzlnb Dsa Todh Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Bdedpfx Ajxl Tnpsa Tsh

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Bdsdpjyhbxcofx Aa Tsh Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Bdodpeic Rl Djfx Aa Toh The hydraulic unit is functional, the drive motor is in the removed state.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. Bjdpfsyu Stkex Aa Tsdh The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Bdsdpjw Az E Tofx Aa Tsh

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. Bjdpfx Aaeyuyg Ss Todh To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: ready for operation (used), Pressing force: 60 tons DIXI bending machine, model 60S, year of manufacture 2006-2010, costs 4,000 EUR. Model from 2017-2019 costs 5,200 EUR. Beam dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight: approximately 2430 kg Beam weight: up to 500 kg Bsdpfx Aajra Nqho Tedh Oil heating Motor: 7.5 kW New, showroom model bending machine costs 11,000 EUR.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment for waste collection and sorting. Previously used on a binding line in the graphic arts industry to collect paper-cutting waste and dust! The system collects waste via a network of pipes using suction power, separates out the dust, and automatically compacts the waste into containers using a hydraulic compactor. The system consists of the following units: BTR Enviromental, model C48H K11, serial 666838, year 1999 cyklon unit Delta NEU, model AMSP as dustseparator Europress, model ES 4, year 2002 hydraulic container-compacting uniter Europress containers K 27 m³, (599 x 235 x 253 cm) as well as the support racks, structures, and walkways shown in the pictures that are part of the equipment Bdedjzd Ak Djpfx Aa Teh Dismantling, packing and loading on trailer in including in price! Incoterms FOT

Condition: used, Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Channel baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connection: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at: Bodpfx Aoz A T I Iea Tsdh 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in fully functional condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.