4
/ year of construction: March, 2003 / CE-conform / completely cleaned and technically checked by us / pressing force: 16 tons / pressing time: ca. 22 seconds / filling opening: 56 x 113 cm / bale weight: ca. 110 - 200 kg, depending on material / bale dimensions: ca. 113 x 73 x 70-100 cm / speed: ca. 4 - 8 bales/hour (according to manufacturer)
Xzv80blz
12
For sale is a well maintained Husmann MP 1000 stationary waste compactor.
In addition, there are three LAUDON containers, each with a capacity of 22 m³.
Type: MP 1000
Byel7li2ua
year of construction: 1990
Dead weight: 3.600 kg
Driving power: 7,5 kW
filling capacity: 1,3 cbm
pressing force: 300 kN
The operating instructions, test reports, circuit diagrams and spare parts lists are available.
The price does not include VAT, free loading ex location Hesse-Germany.
Changes / errors in the technical ...
2
paper press, everything works
Bzomxts7ap
8
MIL-TEC PRESS Model 305 PAPER PRESS FILM PRESSused
immediately usable good CONDITION
used & good / see photos
MIL-TEC PRESS PAPER PRESS FILM PRESSused
press is operated with compressed air, no power supply necessary
Model: MIL TEK 305
Article- No. see photos
Manufacturer: Mil-tek
pressing force / pressing pressure 8 -11 BAR
Press is bolted to the floor, then the press bucket carriage is retracted, connect compressed air and press immediately
Year of manufacture 2011
more presses in our other of...
14
Head office: Tel: +49 - (0)8337 74 245 0
Bramin B30 W raw material / recycling press:
Year: 2019
Power: 4 kW
weight: 1.800 kg
total dimensions (LxDxH): 2.110 x 1.270 x 3.350 mm
pressing force: 30 t
Bale size: WxDxH (mm) 1550 x 800 x 1100
Bale weight: cardboard (kg) 400-500 / plastic film (kg) 400-600
filling opening: WxH (mm) 1525 x 560
Lacing: 6-fold belt
filling height: 1.260 mm
Cdderkde
chamber height: 1.680 mm
stroke: 1.000 mm
Bale ejection: autom.
Subject to alterations, errors and prior s...
10
Waste Baler
BTS-V50 Ballenpresse
Die BTS-V50 Ballenpresse ist perfekt geeignet, um großes Wertstoff-Volumen zu verarbeiten, um dies dann weiter zu vermarkten. Mit ihrer Presskraft von bis zu 50 Tonnen produziert die BTS-V50 Ballenpresse Ballen, die die optimale Größe und das Ballengewicht haben, dass sie kosteneffektiv transportiert werden können. Der integrierte vollautomatische Ballenauswerfer sorgt dafür, dass die Ballen sicher und direkt aus der Presse auf eine Standardpalette ausgeworfen ...
8
The size of the loading opening is 740 x 635 mm
Bale weight up to 40 kg, depending on material
Strapping 3 x strapping
Plnbt
Bale size 800 x 600 x max. 800 mm
dimensions 810 x 735 x 1.280 mm
Device weight 95 kg
4
Machine size
Height (mm) 2525
Width (mm) 745
Depth (mm) 1030
Weight 460 kg
Bale size
Height (mm) 840
Width (mm) 655
Depth (mm) 850
Bale weight Plastic: < 180 kg
Cardboard: < 100 kg
Door Opening
3imcruk
Height (mm) 575
Width (mm) 655
Depth (mm) 815
Degree of Compression 85 - 90%
Noise level < 70 dB (A)
Pressure 4250 kg at 8 bar
Approvals CE and AS/NZ 4024.1
4
Orwak 5070 multi-chamber baler provides sorting and compaction of different types of materials in one machine!
LOADING APERTURE:
Vulxvi
Width: 700 mm
Height: 500 mm
CYCLE TIME: 36 secs
PRESS FORCE: 3 ton, 30 kN
BALE SIZE:
Width: 700 mm
Depth: 500 mm
Height: 700 mm
BALE WEIGHT:
Cardboard:
Up to 50 kg
Plastic:
Up to 80 kg
NOISE LEVEL: < 70 db (A)
PROTECTION CLASS: IP 55
Machine weight total: 522 kg
chamber only: 365 kg
press unit only: 157 kg
OPERATING POWER:Single Phase 230 V, 50 Hz, 10 A
15
2 pcs. MIL-TEK PRESS PAPER PRESS FILM BALER BALING PRESS
ready to use very good CONDITION
used & good / see photos
OFFER CONSISTS OF 2 PRESSES:
MIL-TEC PRESSE PRESS-100 PAPER PRESS FILM PRESSused
MIL-TEC PRESS model 305 PAPER PRESS FILM PRESSused
Presses are operated with compressed air, no power supply required
Dyomri
Manufacturer: Mil-tek
Pressing force / pressing pressure 8 -11 BAR
Press is bolted to the floor, then the press bucket scale is retracted, connect compressed air and press immedi...
9
Bramin / Bramidan B30 raw material press, recycling press
Year of manufacture: 2019
Pressing force: 30 t
Feed opening: WxH (mm) 1200 x 560
Izshqop2k
Bale size: WxDxH (mm) 1200 x 800 x 950
Bale weight: cardboard (kg) 280-350 / plastic film (kg) 350-450
Motor: 4 kW
weight: 1.560 kg
chamber height: 1.560 mm
Stroke: 750 mm
Tying: 4x belt
Changes, errors and prior sale reserved.
9
Waste baler
BTS-V20X Ballenpresse
Dank der sehr geringen Aufstellhöhe und -fläche, sowie des leistungsstarken Pressstempels mit Doppelrammen, ist die BTS-V20X Ballenpresse die ideale Lösung für Nutzer mit größeren Wertstoff-Mengen und niedriger Deckenhöhe. Mit einer Presskraft von bis zu 25 Tonnen kann die BTS-V20X Ballenpresse Kartonage, Folie, Papier, Textilien und sonstige Wertstoffe effizient verdichten.
Empfohlen u.a. für mittelständige Unternehmen, Supermärkte und Logistikzentren mit gr...
10
Good working DIXI 6 S
Serial no; 6060 120 45
Volts; 380, 50hz 3ph.
Amp; 5.44
Power; 2 kw.
This DIXI is in excellent condition and shows little or no wear
2 pieces in stock
0ywltp0
3
Stationary longitudinal press
Vtrjpe
Husmann MP 1613
Hydraulic couplings
2
Used but renovated/refurbished baler. Works great!
The Bramidan 3-x 12 is suitable for smaller retail shops, industrial companies or other companies, who need a compact bale press with high capacity.
Press force (t) 12
Power supply 3×230/400V 50Hz 16A
Motor (kW) 4.0
Noise level (dB) 68
Cycle time (sec) 18
Dimensions WxDxH (mm) 1245 x 775 x 1890
Weight (kg) 835
Filling opening WxH (mm) 715 x 715
Filling height (mm) 735
B3vvypd
Chamber height (mm) 1230
Stroke (mm) 780
Bale size WxDxH (mm) 800 x 6...
12
MIL-TEK PRESS PRESS-100 PAPER BALER FILM BALER BALER
ready to use very good CONDITION
used & good / see photos
MIL-TEC PRESSE PRESS-100 PAPER PRESS FILM PRESS used
press is operated with compressed air, no power supply required
model: MIL TEK 100
article- no. 6138.134
Manufacturer: Mil-tek
pressing force / pressing pressure 8 -11 BAR
Press is bolted to the floor, then the press bucket carriage is retracted, connect compressed air and press immediately
Year of manufacture 2009
more presses in our...
Producer: HSM
Typ: 45 VL
Td7vswij
Presskraft: 5 t
Anschluss: 400 V
Ballengroesse: ca. 70 x 50, h 45 cm
Masse: 75 x 85, h 210 cm
8
Waste Baler
BTS-V5 Ballenpresse
Vielseitig einsetzbar, effizient und einfach zu bedienen. Die BTS-V5 Ballenpresse ist die ideale Lösung für kleine und mittelständische Unternehmen, denn schon bei geringer Materialmenge schafft sie Ordnung, Sauberkeit und Platz. Die Einstellung des Presszyklus erfolgt bei der BTS-V5 Ballenpresse entweder automatisch oder manuell. Mithilfe des „Easy Tie“-Systems kann der fertige Ballen bei geöffneter Tür schnell und bequem abgebunden werden. Die saubere und einf...
2
Stationary press
Husmann ST.SEL
Lifting tipper / Hub tipper
Bov0oijp8m
Bin Compactor
BTS-240L Bin Compactor
With the BTS-240L Bin Compactor for 240 Lt. garbage bins large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing bin volume up to 80%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created.
- Compaction up to 80%
- Reduces frequency of waste collection
- Useable for wet and dry household and commercial wast...
3
Husmann MP 1300 TS
Hydraulic couplings
Bov0fkghfo
Tür Schiebe
