Used packing presses for sale (5)

Waste management & recycling equipment Presses Packing presses

Listing

Waer plates SAPP III-3030 ATM Recyclingsystems GmbH RAS III 33R-1250

Fohnsdorf

8,384 km

Waer plates SAPP III-3030
ATM Recyclingsystems GmbHRAS III 33R-1250

Call

Listing

FZR 320 FZ-Recycling GmbH & Co. KG FZR 320

Germany

7,548 km

FZR 320
FZ-Recycling GmbH & Co. KGFZR 320

Call

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Bljdpfx Adju Thkaeujr Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

See details

Listing

Germany

7,870 km

Baling Press
GERÜUni 8

Call

Condition: used, Year of construction: 1998, pressure:8 t box opening:750 x 500 mm box depth:450 mm material:Pappe,Plaste - cardboard Feed opening:690 x 500 mm voltage:230 / 50 V / Hz transport measurements machine:900 x 600 x 2150 mm Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter Bodpfxeufudwj Aduslr bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm

See details

Sell packing presses now

List now from €4.49*
11 million buyers are waiting for you

Get information now
+49 201 857 86 180

List now

*per listing / month

Listing

Baler 43t 4 binding wire BOA Continette II 4H.43.22

Otrokovice

8,400 km

Baler 43t 4 binding wire
BOAContinette II 4H.43.22

€39,900

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2007, operating hours: 8,590 h, machine/vehicle number: V300397 - 10, Machine type : BOA Continette II Machine number : V300397 - 10 Norm :according CE Machinery Directive and AS 3000 Surface treatment : RAL 5015 Bledsihpgajpfx Adusr Voltage : 240-415 Volt / 50 Hz E-motor hydraulic pump : 22 kW Protection class : IP 55 Insulation class : F Total weight : ± 9000 kg Main dimensions (lxwxh) : 6415x2665x3034 Channel dimensions (lxwxh) : 2030x1000x720 Filling hopper dimensions (lxw): 1200x730 Bale dimensions (lxwxh) : variable*800*730 Pressure force (max. 280 bar) : 882 kN Specific pressure : 43 ton Contents hydraulic aggregate : 800 litre Hydraulic oil specification : Shell Tellus TD 46 Max. pressure : 280 bar Number of cylinders : 3 Hydromat type (vertical) : H 160-4 Number of binding wires : 4 PLC : Siemens Simatic CPU S7 Operation terminal : Touch screen Siemens Sound-pressure level : 75-86 dB(A) 6th of July was baler exchanged and not used Spare parts: wire lances, twist fingers, hydraulic valves, ram hydraulic cylinder, hydraulic pump, PLC modules, touch screen

See details

Listing

Waer plates SAPP III-3030 ATM Recyclingsystems GmbH SAPP III-3030

Fohnsdorf

8,384 km

Waer plates SAPP III-3030
ATM Recyclingsystems GmbHSAPP III-3030

Call

Discover more used machines

bale presses

briquetting presses

How can I spot good Packing presses?

Key Features to Consider

Manufacture Date: Newer models might have more advanced features and comply with current regulations. However, older models in great condition can be just as effective and often more cost-effective.
Brand Reputation: Reputable brands often indicate reliability and efficiency. Research brand reviews and customer experiences to make an informed decision.
Operational History: Understand the history of the packing press. Machines with a complete service history and fewer owners may be more reliable.
Current Condition: Inspect for any signs of excessive wear or damage. Make sure all parts are operable and the press functions appropriately during a test run.
Efficiency and Speed: Check the processing speed and efficiency during operation. This can significantly impact your production rates and energy consumption.

Inspection and Testing

Environmental Factors: Consider where the press was previously stored and used. Excessive humidity, dust, or corrosive environments can affect longevity and performance.
Maintenance Check: Verify that the machine has been regularly maintained according to the manufacturer’s recommendations. Maintenance logs can provide insights into the care and handling of the equipment.
Warranty and Support: Look for options to purchase extended warranties or service agreements. Also, check the availability of spare parts and the support network of the manufacturer.

Cost Considerations

Compare the purchase price against new machines considering potential repair or upgrades needed. Long-term savings can often justify an initial higher investment in a better-quality press.

Key Features to Consider

Manufacture Date: Newer models might have more advanced features and comply with current regulations. However, older models in great condition can be just as effective and often more cost-effective.
Brand Reputation: Reputable brands often indicate reliability and efficiency. Research brand reviews and customer experiences to make an informed decision.
Operational History: Understand the history of the packing press. Machines with a complete service history and fewer owners may be more reliable.
Current Condition: Inspect for any signs of excessive wear or damage. Make sure all parts are operable and the press functions appropriately during a test run.
Efficiency and Speed: Check the processing speed and efficiency during operation. This can significantly impact your production rates and energy consumption.

Inspection and Testing

Environmental Factors: Consider where the press was previously stored and used. Excessive humidity, dust, or corrosive environments can affect longevity and performance.
Maintenance Check: Verify that the machine has been regularly maintained according to the manufacturer’s recommendations. Maintenance logs can provide insights into the care and handling of the equipment.
Warranty and Support: Look for options to purchase extended warranties or service agreements. Also, check the availability of spare parts and the support network of the manufacturer.

Cost Considerations

Compare the purchase price against new machines considering potential repair or upgrades needed. Long-term savings can often justify an initial higher investment in a better-quality press.