Condition: ready for operation (used), Year of construction: 2017, One Siemens flange gear motor and two identical VEM three-phase motors are available. 1) Siemens flange gear motor, year of manufacture: 2014, shaft diameter: 80mm, power: 160kW, speed: 1485rpm, gear ratio: 33. 2) 2x VEM three-phase motors, year of manufacture: 2017, power: 200kW, speed: 1490rpm, operating mode: continuous operation, power factor: 0.87, weight: approx. 250kg. An on-site inspection is possible. Individual sale possible. Bwodpfx Afoxxl Injysi

Condition: ready for operation (used), Year of construction: 2016, A Hoyer three-phase asynchronous motor is available. Protection class: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. Including Lenze i550 frequency converter. On-site viewing is possible. Bedpfexmkc Hjx Afyewi

Condition: ready for operation (used), Year of construction: 2018, Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible. Bwodpfeygmb Tex Afysi

Condition: ready for operation (used), Year of construction: 1994, Offered is a high-voltage switchgear device ZK8 System Calor Emag from Peters & Thieding. Year of construction 1994, standard series VDE 0670 (IEC 62271), rated voltage 24.2kV, insulation level 50/125kV, rated frequency 50Hz, operating current 630A, short-time withstand current 20kA, short-circuit duration 1s. Viewing is possible by arrangement. Bwjdpfx Afoxyk Txoyoi

Condition: ready for operation (used), Motors from various manufacturers are available. 1) Bauer DK94V13V/231. 2) Siemens 1LA2778-4AA21. 3) Magnetic VPD6010-002. 4) SEW RF77/A. 5) GK 830-200LW. 6) Bauer DO740-200L. 7) RKF 27/28/2057R. 8) Lenze DERAXX071-32. An on-site inspection is possible. Bwsdpfxjx Syvvs Afyji

Condition: ready for operation (used), Year of construction: 2000, A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible. Bodpfoxwcupjx Afyowi

Year of construction: 2014, condition: ready for operation (used), A refrigeration unit ERS is available. Refrigerant: R407C, refrigerant quantity: 13kg, heat inlet/outlet temperature: 15°C/20°C, cooling capacity: 25580W, tank volume: 360l, pump capacity at 390kPa: 4.4m³/h, max. operating pressure low/high: 22bar/29bar. Machine dimensions: approx. 1650mm/900mm/2000mm, weight: approx. 930kg. Documentation available. An on-site inspection is possible. Bwsdpfx Afjxr Nwgsyoi

Condition: ready for operation (used), Year of construction: 2019, Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible. Bedpfx Afer A Eibjyswi

Condition: ready for operation (used), Year of construction: 2021, A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available. Bjdpet Nhmnjfx Afyewi

Condition: ready for operation (used), Year of construction: 1990, A Weishaupt dual-fuel burner is available. Fuel: gas/fuel oil, gas type: N, category: I, set pressure min./max.: 30bar/180bar, heat output: 850kW-8550kW, oil throughput: 150kg-720kg/h, fuel oil: EL, engine output: 14kW, machine dimensions X/Y/Z: approx. 2100mm/1400mm/900mm. On-site inspection is possible. Bodpowwlkvjfx Afyswi

Condition: ready for operation (used), Year of construction: 2024, A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible. Bwodpfxexa Ekls Afyoi

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Bwodpfx Aoxc Ni Rofyei

Condition: ready for operation (used), Year of construction: 2021, A total of 12 low-voltage motors are available, 4x SIMOTICS SD 1LE5 and 8x SIMOTICS SD 1LE1. (1) SIMOTICS SD 1LE5, Motor type: Three-phase asynchronous motor, low voltage, cast iron housing, Severe Duty series SIMOTICS SD (model range 1LE5), protection class: standard IP55, insulation class: Class F, operating mode: continuous duty S1 according to IEC/DIN EN 60034-1, environment: -20°C to 40°C, up to 1000m above sea level. (2) SIMOTICS SD 1LE1, rated voltage: standard voltages, operating mode: continuous duty S1, housing: cast iron (Severe Duty), cooling: self-ventilated, insulation class: F (temperature class 155 / utilization B), speed range: 750-3600/min, max. rated torque: approx. 1703 Nm. The motors are still unused, the year of construction is 2021/22. An on-site inspection is possible. Bjdpsw Tc Rwjfx Afyewi

Condition: ready for operation (used), Year of construction: 2017, Two Weishaupt gas burners including two WMG boilers are available. Output: 2x3.3MW. Documentation available. An on-site inspection is possible. Bwodpsxt Rlnofx Afyji

Condition: ready for operation (used), Year of construction: 2010, Nominal power: 160kVA, including NH isolator with capacitors, GBE T119 DIN monitoring, 5 medium-voltage switches and 1 measuring transformer cabinet with instrument transformer. weight: 1.06t. On-site inspection is possible. Bodpjrck D Hsfx Afyjwi

Year of construction: 2011, condition: ready for operation (used), Cooling output: 36.2kW, operating temperature: 50°C, weight: 1.57t, an inspection is possible. Bedpfjrick Esx Afyjwi

Year of construction: 2002, condition: ready for operation (used), Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Bwedpoui R Smsfx Afyei

Condition: ready for operation (used), Year of construction: 2013, An old steam boiler Loos including a relatively new Weishaupt burner is available. 1) Steam boiler Loos UL-S, year of manufacture: 1991, steam output: 6000kg/h, max. operating overpressure: 13bar, boiler volume: 6380l. 2) Weishaupt burner G50/2-A, year of manufacture: 2013, output range: 600kW-5400kW, connection pressure range: 15mbar-500mbar. Documentation available. An on-site inspection is possible. Bjdjx Uq T Rjpfx Afyjwi

Condition: ready for operation (used), Year of construction: 2022, An originally packaged Weishaupt burner is available. Thermal output range: 145kW-570kW, flame head: W40/1, typical pump pressure setting: 12bar, weight: approx. 40kg. Documentation available. An on-site inspection is possible. Bedpex Uq Uzsfx Afyowi

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Bodsw Uk A Dspfx Afyswi

Condition: ready for operation (used), A Wolf ventilation system with supply and exhaust air units is available. 1) Supply air unit Wolf KG 40, air volume flow: 3000m³/h, pressure loss (external): 300Pa, heating capacity: 25.7kW, cooling capacity: 18.4kW, motor power: 3kW, motor speed: 2890rpm. 2) Exhaust air unit Wolf KG 40, air volume flow: 2000m³/h, pressure loss (external): 300Pa, motor power: 0.75kW, motor speed: 2855rpm. Documentation available. An on-site inspection is possible. Bedpfx Ajxc Nh Hefyjwi

Condition: ready for operation (used), Year of construction: 1967, Test pressure: 13bar, volume: 790kg, capacity: 4000kg/h, heating surface: 100m², total system dimensions X/Y/Z: approx. 5600mm/3700mm/3850mm. Includes an oil-gas industrial burner Saacke ESSR8 L. An on-site inspection is possible. Expected to be available from September 2025. Bjdetul Rdepfx Afyewi

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Bwedpfsxd Au Asx Afyji

Condition: ready for operation (used), An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible. Bwodpfx Afowf Nxmsyji

Condition: new, Year of construction: 2010, Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich. Bwsdpfx Aoxxl Ihefysi