Mill

Hosokawa Mikropul ACM 40

Condition: excellent (used), strip width: 6 - 200 mm Kdjlep E Ed Rehccqlsp strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: refurbished (used), After refurbishing, our Leybold Sogevac SV 1200 Rotary Vane Pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty Kolhccehqxtqeqljdp

Condition: new, Year of construction: 2026, functionality: fully functional, Eccentric press 160t / 1600kN Siemens 1200 PLC Adjustable stroke 16–160mm Ram adjustment 100mm Ram plate 740 x 420mm Ram plate thickness 100mm Table plate 1250 x 700mm Kslhccqjwir U Eelsdp Table plate thickness 180mm Motor 15kW Weight 16,000 kg For new machines, delivery time approx. 4–5 months.

Condition: good (used), Skid mounted Busch 630 vacuum pump in very nice condition. Direct from food factory. Kdjlhccqsptbi Dslsp

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Kslhccqjyacaxjlsdp Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side Kdolhcox Ac Rbecqlsp ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Year of construction: 1997, condition: used, Multi-tool milling unit with pneumatic transfer. Manufacturer: Forplex Model : FNG3 Kdolhccszfwvweqlsp Type: Hammer/pin mill Year: 1997 (2021: full manufacturer retrofit: mechanical, electrical, etc.) Available milling tools: - Pin plate set (rotor / stator) - Hammer plate + sieve ring assembly - Blade plate + sieve ring assembly Capacity : 100 à 3000 kg/h Motor power : 45 kW Door opening safety Pneumatic transfer outlet under the mill Rotor diameter : Ø 440 mm Grid diameter : Ø 450 mm Donaldson Dalamatic DLMV 25/12 filter - Year: 1997 (2021: refurbished by Forplex) - Materials: stainless steel - Filter type: bag filters - Cleaning system: pneumatic - Hopper under filter - Air flow, fan : 7.5 kW - Rotary valve Electrical cabinet - Touchscreen HMI for controlling the entire unit - management of the milling unit - safety management - recipe management - variable-speed drive on the mill motor. Mill dimensions : 225 x 113 x 285 cm Weight : 500 kg

Year of construction: 2020, condition: ready for operation (used), A Dinnissen centrifugal screening machine for classifying screening of bulk materials is available. Screening area: 2.2m², screen basket division: 5, inlet height: 900mm, screen basket fineness: 250µm, min. screening chamber operating pressure: 0.5bar. Machine dimensions X/Y/Z: approx. 2200mm/1050mm/1650mm, weight: approx. 1050kg. Without control cabinet. Documentation available. An on site inspection is possible. Image is an example. Kslhccqeydpz Rolsdp

Condition: used, functionality: unexamined, Year of construction: 2018, Plant for endogas generation Year of manufacture: 2018 Kdelhccex An Rmjqljp Net price (new): €103,500.00 Manufacturer: Hammer GmbH Model: Larus ENDOGEN-40-1.05-E incl. dew point control or cp control fully automatic power control in the range of 50–100% soot filter in duplex version

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Kelhcjzadmgjcqledp