Used mills for sale (130)

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW Kledpfx Aeg H Nf Rshwon

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: Kledpfsghgbtex Ahwon This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Kledpfeghgb Eox Ahwon Rotor blades: 5 Stator blades: 2 Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. Kedpeghgftofx Ahwoln ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.

Condition: used, machine/vehicle number: 3349, 2-blade double rotor 3 rows of stator blades Kjdeghgf Nopfx Ahwjln Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: used, machine/vehicle number: 11058, 3-blade rotor 8 rotor blades (staggered) 2 rows of stator blades Rotor diameter: 200 mm Kljdoghgg Hopfx Ahwsn Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 10460, 5-blade rotor 2 rows of stator blades Rotor diameter 400 mm Working width 600 mm Klodoghgg Ujpfx Ahwjn Inlet cross-section approx. 500 x 600 mm

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW Ksdjghgq Nepfx Ahwoln With noise protection box, noise protection hopper, and exhaust fan

Condition: used, machine/vehicle number: 12579, Rotor diameter: 450 mm Rotor width: 650 mm 3-knife rotor 2 rows of stator knives Kljdpfxjkyzavj Ahwjn inlet cross section approx. 450 x 650 mm drive motor: 37 kW

Condition: used, machine/vehicle number: 5772, Rotor diameter: 300 mm Rotor width: 500 mm 3 x 2-knife rotor 2 rows stator knives Ksdpfxek Nfpyj Ahwoln Inlet cross section approx. 300 x 500 mm Drive motor: 37 kW Machine with roller feeder

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA auxiliary mills of the GSL series 180/120 to 180/430 were developed as low-speed mills especially for applications in the injection moulding sector. They have a rotor diameter of 180 mm and working widths of 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be reground several times. Kledpfx Aeghgbdshwjn The material to be shredded is fed via a noise-reduced feed hopper of sandwich construction, which is available in different versions depending on the type of feed. Depending on the task, the side mills of this series are mounted on a low or high chassis and completed with a corresponding suction/outlet trough. Together with numerous options, the side mills are extremely variable in use. In addition to the usual advantages of all low-speed mills, such as low noise emission and almost dust-free grinding material, the GSL 180/120 to GSL 180/430 beside-the-machine mills are characterized above all by their knife, rotor, quick-snap system and by their good accessibility.

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Kodpfxsghgfzj Ahwjln Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: used, machine/vehicle number: 11431, Rotor diameter: 450 mm Rotor width: 600 mm Paddle rotor 3x3 rotor blades (offset), 2 rows of stator blades Inlet cross-section approx. 550 x 625 mm Kledpoghgl Ssfx Ahwen Drive motor 30 kW Suitability: Primarily for shredding hollow blow moldings and bulky molded items such as bottles, canisters, jugs, bowls, baskets, buckets, tubs, etc.

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm Kodpfsghgmzjx Ahwjln 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: used, machine/vehicle number: 12861, Rotor diameter: 400 mm Kedpfjnn Nbasx Ahwjln Rotor width: 600 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 400 x 600 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 12479, Rotor diameter: 300 Rotor width: 600 Rotor blade: 6 Stator knives: 2 Inlet cross-section approx. 519x316 Drive motor: 18.5 KW Pneumatic tilting device for upper part of housing Without switch cabinet and electrical wiring (can be set up for an extra charge). Spare parts and other system components are available. Klsdpfx Ahowbwt Rswon

Condition: used, machine/vehicle number: 13110, Rotor diameter: 260 mm Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Kledpfxowfigkj Ahwon Inlet cross-section approx. 400 x 340 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Rotor width: 400 mm Klsdpfxewikaao Ahwjn Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 300 x 400 mm Drive motor: 15 kW

Condition: used, Rotor diameter: 700 mm Rotor width: 1250 mm Rotor blades: 5 rows Stator blades: 2 rows Inlet cross-section approx. 700 x 1250 mm Kedpfxswqyiao Ahweln Drive motor: 75 kW

Condition: used, machine/vehicle number: 12883, Rotor width: 800 mm Rotor blades: 5 Stator blades: 4 Kledpfx Aewbwqvohwen Inlet cross-section approx. 500 x 800 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 13276, Rotor diameter: 450 mm Rotor width: 300 mm Rotor blades: 9 Stator blades: 2 Inlet cross-section approx. 370 x 170 mm Drive motor: 45 kW Klodpswikamsfx Ahwjn

Condition: used, machine/vehicle number: 12047, Rotor diameter: 260 mm Rotor width: 300 mm Kljdpfxswfigws Ahwjn Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 260 x 300 mm Drive motor: 7.5 kW

Condition: used, machine/vehicle number: 12178, Rotor diameter: 600 mm Rotor width: 750 mm 9-blade rotor 6 rows of stator blades Inlet cross-section approx. 750 x 600 mm Kljdpfx Aohtz Nqjhwsn Drive motor: 55 kW

Condition: used, machine/vehicle number: 11056, 3-blade rotor 2 rows of stator blades Kedsghghkepfx Ahwsln Rotor diameter: 350 mm Working width: 600 mm Inlet cross-section: approx. 600 x 450 mm Machine with noise protection box

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm Ksdsghgl Ijpfx Ahweln 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Drive motor 5.5 kW Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg