Used heating & blowers for sale (251)

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm Ljdpfjxv Akzjx Aa Eorl - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: new, Year of construction: 2024, functionality: fully functional, fuel: electricity, input frequency: 50 Hz, Equipment: type plate available, ZIEHL ABEGG AXIAL FAN MAXvent owlet REF: DN12V-6DF.K9.14.P6 Casing: The fan casing is made of hot-dip galvanized steel, long version with a connection according to EUROVENT standards. The fan's operating temperature range is -20 to 50°C. Casing diameter: 1350 mm Impeller: The impeller is made of the new ZAmid composite material – it is extremely lightweight yet as hard as steel. The impeller is dynamically balanced and fitted with 6 blades at a 14° pitch. Impeller diameter: 1250 mm Number of poles: 6 SIEMENS three-phase motor: Lrjdpfxsxvz Uxe Aa Eel 400V 50Hz 9.57 kW 19.70A 980 rpm BRAND NEW EQUIPMENT, NEVER INSTALLED

Condition: ready for operation (used), Year of construction: 2024, A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible. Lrjdpfx Aajxa Ekle Eol

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Lrjdpfxsw Uk A Ds Aa Ejl

Condition: ready for operation (used), Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used. Lrsdpfx Aek S Eh Sea Eel

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Lodsyk Sgcopfx Aa Eorl

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 Lrodpfxjr Eyycj Aa Ejl - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. We are looking forward to your request.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: Lodpfjuubctsx Aa Ejrl 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW 2 steps of +/- 125kW Other steps possible in consultation External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. 20Ft container

Condition: used, Year of construction: 2018, functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Lrjdpfjv Uz Efsx Aa Eel Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Lrsdpfx Ajyf U R Hsa Eel Disassembly and transport are at the buyer's expense. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2020, operating hours: 24,259 h, functionality: limited functionality, machine/vehicle number: 7633193000003100, power: 216 kW (293.68 HP), overall weight: 4,500 kg, total width: 1,900 mm, total length: 6,000 mm, total height: 1,700 mm, type of input current: three-phase, pressure: 6 bar, control cabinet height: 1,600 mm, control cabinet length: 400 mm, control cabinet width: 1,000 mm, temperature: 100 °C, operating pressure: 6 bar, Equipment: hot water, type plate available, For sale: Viessmann Vitoflex 300-UF Wood Chip Heating System (2020) – 216 to 720 kW. Highly efficient wood chip heating system for industrial applications with exceptionally low emissions. Ideal for agricultural operations, industrial heating systems, or municipal district heating and local heating networks. The complete system includes: • Fine dust filter for ultra-low-emission combustion (Schräder exhaust gas technology Nat E-Filterbax-4-D300) • Automatic fuel feeding system • Control cabinet and control unit • Professionally maintained – excellent condition Technical specifications: • Manufacturer: Viessmann Lrodpfx Aaoxvb Tbo Esl • Model: Vitoflex 300-UF • Output: 216 – 720 kW • Year of manufacture: 2020 • Operating hours: approx. 6,000 – 8,000 h (mainly operated during winter months) • Fuel: Wood chips Additional information: • Complete technical documentation and maintenance records available upon request • Dismantling and transport can be arranged by agreement • Used system, sale as seen, without warranty Location: Netherlands Viewing by appointment possible.

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, overall weight: 14,000 kg, space requirement length: 8,000 mm, total width: 2,500 mm, Equipment: hot water, large custom-built wood heating boiler in a hooklift container, this mega boiler can be filled from the top using a loader or similar equipment, due to circumstances almost finished but never used Lsdpfx Aex Au Apoa Ejrl

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation Lredpfx Aex Ihg Iea Esl CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Lsdpfsx Ihiiex Aa Eorl Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Lister KL5L Air-Cooled Chiller Manufacturer: Lister Type: KL 5 L kW: 3.25 Voltage: 400 V Frequency: 50 Hz 6.3 Amps Lrodpfx Aaox Elvze Eol Refrigerant: R 134a Max. Operating Pressure: 13 bar Dimensions: (W x D x H) 940 x 560 x 1100 mm Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), ApenGroup LRP28DE Gas-Fired Warm Air Generator Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nominal Heat Input QN: 27 kW Nominal Heat Output: 24.63 kW Connection Voltage: 230V 1N, 50Hz Airflow: 2700 m³/h Protection Class: IP20 Find more items – new and used – in our shop! Lsdpfx Aox Ihlkea Eorl International shipping costs on request!

Condition: new, - NEW -without side panel and without baseKanuk® Originalwarm air stove- combustion chamber opening H x W (cm): 31 x 31- flue pipe connection:top / rear- efficiency (%): 83.9- log length (cm): 48- minimum flue draught (Pa): 16- ash box: no- BimSchV stage 2: yes- lignite briquette: no- CE mark: Yes- Total power (kW): 17,7- Room heating capacity (m³): 540- Viewing pane (cm): 24 x 14- Weight (kg): 153- Wood consumption (kg/h): 4,2- Flue gas throttle: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 80 mm- Dimensions H x W x D (cm): 80 / 58 / 95- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 232- Flue gas mass flow (g/s): 14.28- Combustion chamber H x W x D (cm): 40 x 44 x 49.5- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100108 Lredpfx Aaovyd Awo Eel

Condition: new, Year of construction: 2025, functionality: fully functional, Patented electric heating solution for efficient and cozy heating. Lrodpoqvmcpefx Aa Eel Heat output 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) for approx. 10-35 sqm area at approx. 2.5 m room height Connected load 11.8 A Dimensions 54x29x80 cm Weight 15 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Lrjdpfx Aoxwhw Aja Esl Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: good (used), Manufacturer: Systema Lsdpfx Asi D Dkaea Eorl Type: H100

Condition: good (used), Manufacturer: Systema Type: H100 Lrodpfx Aaji D Dkde Esl

Condition: excellent (used), Year of construction: 1999, Manufacturer BLACKHEAT BH 50 year of production: 1997-2002 heat output: 45kw gas type: G20 nozzle diameter: 6mm nozzle pressure 8.7mbar pipe length: 9-12 meters p connection: 360mbar Connection voltage: Max. current consumption: IP30 Lrjdpfjn Uvgijx Aa Esl AC 230V 50Hz

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating Ljdpfx Aehrnv Nja Ejrl made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg Lredpfevmhq Esx Aa Eol

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). Lrsdod Aqqzjpfx Aa Ejl • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.