Used collecting machines for sale (98)

Condition: excellent (used), Duplo System 5000 Lrodpfxjxtwyxj Adzer Year 2007 Trimmer DBM 500 2xDC 10/60

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 020100506, Used Duplo DBM-400STL left-side high-pile stacker/delivery unit for compatible Duplo collator and bookletmaking systems. The DBM-400STL is a floor-standing, high-capacity stacker designed for stable and organized delivery of collated sets. It is suitable as a replacement unit, spare unit, or system extension for compatible Duplo System 4000 / System 5000 / DC-10/60 configurations. Main features: Left-side stacker version: DBM-400STL High-pile/high-capacity stacker Straight stacking and offset stacking Floor-standing construction on wheels Suitable for compatible Duplo collator/bookletmaking systems Ideal as a replacement unit, spare unit, or extension for an existing Duplo line Industrial Duplo construction Made in Japan Technical data: Model: Duplo DBM-400STL Type: left-side stacker/delivery unit Paper size: 210–350 mm width, 139–500 mm length Stacking mode: straight stacking/offset stacking Maximum speed: up to 9,000 sets/hour Stack capacity: approx. 430 mm Maximum set thickness: approx. 6 mm Dimensions: approx. 750 × 915 × 890 mm Weight: approx. 125 kg Power supply: 220–240 V / 50–60 Hz / 1.2 A Year of manufacture: 2001 Serial No.: 020100506 Important note: This is a system accessory for compatible Duplo collator/bookletmaking lines. The buyer should check the required interface and connection with their existing Duplo configuration before purchase. Lrjdszbu Iqjpfx Adzsr Condition: used, available for inspection Location: Budapest, Hungary

Condition: ready for operation (used), Presser bander stacker delivery Lrjdjq Tfacopfx Adzjr

Condition: ready for operation (used), Bander stacker Lsdpfx Asir A Nvedzorr

Condition: ready for operation (used), Counter Stackers Palamides Alpha 800 -2003 Lredoir A Nyspfx Adzsr

Condition: used, offer consist of: - manual device HMU-80 Horizon HMU-80 manual device - compatibel with: Horizon MC-80a / MC-80m / MC-80c - weight: 8,8kg We can also organize the following for you: Lrodpfxjw Evaqo Adzjr packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consist of: - manual device HMU-80 Horizon HMU-80 manual device - compatibel with: Horizon MC-80a / MC-80m / MC-80c - weight: 8,8kg We can also organize the following for you: Ledew Evbhjpfx Adzerr packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2007, The Horizon StitchLiner 5500, manufactured by Horizon in 2007, is a machine with a format of 350 x 500 mm currently in production and located in Germany. This machine includes two VAC-100a and VAC-100m collating towers, an ST-40 stacker, an ACF-30 accumulator and folder, an SPF-30 saddle stitcher, an HTS-30 three-knife trimmer, and a TB-30 transport belt. Key features include 20 stations, a U-shaped layout for efficient space utilization and easy monitoring, inline production from collating to the finished product, and variable data processing for personalized printing. It offers fully automatic format adjustment for quick job changes and a touchscreen for user-friendly operation, even for less experienced operators. Lsdpfx Adevfx Ncszsrr The specifications include handling sheet sizes from a maximum of 500 x 350 mm to a minimum of 148 x 120 mm, with a paper weight range of 40-350 gsm. It can process thicknesses from 8 to 200 pages, with a maximum spine thickness of 5 mm, and achieves a production speed of up to 5,500 booklets per hour. Technical details include a trimming size (untrimmed) from a maximum of 350 x 250 mm to a minimum of 140 x 103 mm, and a trimming size (trimmed) from a maximum of 312 x 230 mm to a minimum of 120 x 95 mm. The machine requires a power supply of 400V/50Hz. The delivery terms are FCA. Format: 350 x 500 mm Equipment: This StitchLiner 5500 includes the following components 2x VAC-100a and VAC-100m Collating Towers ST-40 Stacker ACF-30 Accumulator and Folder SPF-30 Saddle Stitcher HTS-30 Three-Knife Trimmer TB-30 Transport Belt Key Features:- 20 stations- U-shaped layout: Efficient space utilization and easy monitoring- Inline production from collating to finished product- Variable data processing: Handles personalized p printing- Fully automatic format adjustment for quick job changes- Touchscreen for user-friendly operation, even for less experienced operators Specifications:- Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm- Paper weight: 40-350 gsm- Processing thickness: 8-200 pages (max. 5 mm spine thickness)- Production speed: Up to 5,500 booklets/ Technical Details:- Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm- Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm- Power supply: 400V / 50Hz- Space requirement: Min. 5,709 x

Condition: used, Format: 320 x 450 mm Equipment: Friction collator 10 Stations DFC Series collators use three prependicular rubber feed wheels to feed sheets into the machine. This ensures collators can grip the entire leading edge of the sheet to guarantee feeding of all sheet Lsdpex Hzx Ijfx Adzerr from A5 to A3 feed systems - 3 friction feed wheels Capacity per station - 28 mm (260 mm sheets at 80 g/qm2) Min sheet size - 140 x 140 mm Max sheet size - 320 x 450 mm Paper weight - 50-130 g/qm2 Speed ??(games/hour) - 3900 games/hour 220 volts-mono

Condition: used, Year of construction: 2008, functionality: fully functional, PALAMIDES DELTA 703 STACKER OUTPUT WITH CALENDER Output stacker with automatic calender including counting, integrated banding and sealing system, press station up to 3.5 tons, automatic format recognition, antistatic device. Lredsy R Sdcspfx Adzer

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Horizon gathering tower Horizon VAC 100m 10 stations with a stacking height of 55 mm Minimum format 148 mm x 120 mm / Maximum format 450 mm x 500 mm Speed up to 9500 cycles/h Lrjdpfx Aewt D S Djdzer Double, miss, and jam detection Double cycle / eject 1 or 2 times Manual / spare parts list Power connection 230 V, 2.3 KW / weight 320 kg / dimensions 810x954x1961 mm Software version 1.20

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Horizon ST-40 Stacker / Reject Gate The versatile ST-40 enables the stacking of finished sets onto a lowering table as well as transfer to an optional booklet making unit—at the push of a button and without any conversion required. Additionally, the ST-40 serves as a reject gate for faulty sets during collation or booklet production. - Max. format: 350 x 500 mm - Min. format: 182 x 128 mm - Paper weight: 52 – 208 g/m² - Max. speed: 8,000 sets/hour - Stack height: 360 mm - Machine dimensions: 1,353 x 652 x 1,027 mm (L x W x H) - Power supply: Schuko plug, 230 V - Manuals in German / English, spare parts list included - Total of 3 delivery trolleys Lodpfswtmxajx Adzorr

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, stack height: 30 mm, paper weight (max.): 1,000 g/m², product length (min.): 500 mm, product width (max.): 350 mm, Equipment: CE marking, No reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the equipment by 17/10/2025. As these are floor-level machines, extraction is straightforward. The offer includes one tb sprint B 312 VP and one tb sprint 304 QSM! Both machines were fully overhauled in 2023. --- tb sprint B 312 VP TECHNICAL DETAILS - Stations: 12 - Variable stack height: up to 30 cm - Formats: max. 35 x 50 cm, min. 6.5 x 10 cm - Paper weights: 18 to 1,000 g/m² - Throughput: up to 3,200 cycles/h MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - EQUIPMENT - CE marking - Jogger bridge as a removable transfer to connecting machine - Manual feed station left - Lateral air blast - Individually adjustable single suction and blow nozzles - Controlled air separation and blast - Photocell sheet miss-feed detection per station - Electromechanical double-sheet detection at the delivery (motorized adjustment) - Overlapping shingle conveyor for transverse transport - Paper jam detection for transport table - Table illumination - Manual feed station right - Delivery jogger for standard or offset stack, selectable via switch - Total and pre-set counters - Digital speed display in cycles/h, infinitely adjustable --- tb sprint 304 QSM TECHNICAL DETAILS - Formats: max. 35 x 50 cm, min. 6.5 x 15.5 cm - Smallest booklet: 6.5 cm spine length x 6.5 cm - Throughput: up to 3,100 cycles/h (format and paper dependent) Stapling - Stitching heads: 2 slim heads for standard stapling up to 5 mm (Hohner Universal) - Fold-down boxes: complete with fold-down boxes and wire spools - Automatic stapling thickness adjustment - Block stapling: up to maximum format - Cross adjustment: of the staples relative to the fold Folding - Fold system: frictionless knife fold with automatic thickness adjustment and re-pressing for approx. 120 sheets of standard 80 g/m² paper - Channel punch-out: single for block stapling Trimming - Front trim: upper and lower knives incl. air blast for trims to 6.5 cm and offcuts greater than 1.5 cm - Format adjustment: stepless for front trim - Head and foot trim: 3–20 mm each for approx. 80 sheets of standard 80 g/m² paper - Knives: upper and lower - Waste paper box: included Lsdpsxb Dbxofx Adzerr - Continuous operation: same formats as 303 QSM Delivery - Shingle conveyor: shortened version with double-sided motorised feed and continuously adjustable shingle spacing - Delivery angle: format-adjustable for booklets and block stapling MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - Machine Configuration - Version: Quick Set motorised (QSM) - Feed rollers: with upper belt transport system - Vacuum belt: included - Motorised format changeover: included - Fine adjustment: two handwheels (independent for head and foot) - Size readout: two digital counters, 0.1 mm increments - Motorised alignment: to collating machine

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Lrjdpfx Aoxdy R Isdzjr Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: reconditioned (used), Year of construction: 2018, Gathering Elements (=3 stations) for elongation of an existing perfect binding line Ledpfx Ajvrca Sedzorr or solo gathering machine

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 303 CS 2816, total width: 2,000 mm, total length: 8,000 mm, total height: 2,000 mm, Equipment: compressor, Collating Machine Theisen & Bonitz tb sprint 303 CS – 8 Stations – with Stitching Unit – Year of Manufacture 1999 For sale is a Theisen & Bonitz tb sprint 303 CS collating machine featuring 8 collating stations and an integrated stitching unit. This machine is ideally suited for producing brochures, booklets, catalogues, and multi-page print products, and is a proven solution for print shops and finishing operations. The robust construction of the tb Sprint series ensures reliable and long-lasting performance. Thanks to its compact design and user-friendly operation, the machine is suitable for smaller production lines as well as for integration into existing setups. Technical Data Manufacturer: Theisen & Bonitz Model: tb sprint 303 CS Year of Manufacture: 1999 Machine No.: 303 CS 2816 Number of Stations: 8 Equipment: integrated stitching unit Application: brochure and booklet production Lrodpoyucwgofx Adzor Condition Used, commensurate with age. Scope of Delivery Machine as described and shown in the photos. Inspection / Availability Inspection possible by appointment. Immediately available – subject to prior sale.

Condition: excellent (used), Year of construction: 2013, Hugo Beck Rotary Feeder TA 4415 The rotary feeder is the most frequently used feeder in the graphic sector. It feeds products into a packaging or inserting machine. Thanks to its rapid adjustability—from very thin to comparatively thick products—the rotary feeder is suitable for a wide range of different items. All versions are characterized by high flexibility, motorized height adjustment, as well as independent drive and control systems. Technical Data: Length: 70–400 mm Width: 90–440 mm Height: up to 8 mm Ljdpfx Adsyk Eqhezorr Output: up to 15,000 cycles/hour

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Universal Feeder HB 350 The Universal Feeder HB 350 is capable of handling even very heavy products with a height ranging from 2 to 80 mm. Thanks to its independent control and drive unit, it operates completely autonomously. It enables fully automatic feeding of both main products and inserts. For example, magazines or catalogs with a length of 148 – 420 mm, a width of 105 – 315 mm, and a height of 2 – 60 mm can be easily inserted. The performance of this universal feeder reaches up to 18,000 cycles per hour. Thanks to its motorized height adjustment, it can be used flexibly. Lredpfx Aoyk Emvsdzer

Condition: excellent (used), Year of construction: 1996, Very good condition AM Wohlenberg/ Sheridan SP562S saddle stitcher with associated compensating stacker. The machine has 6 stations and cover feeder. Also included are 2 center cut devices and 4 Hohner stitching heads in working condition including knives. The complete technical documentation, operating instructions and spare parts lists are available. Ledpfx Adoriv Dhozerr Disassembly, transportation and recommissioning of the machine can be offered for an additional charge by arrangement.

Condition: good (used), Year of construction: 2014, Device for feeding printed products Lrodpfxoxwqkro Adzsr

Condition: used, functionality: fully functional, Horizon füzetkészítő gépsor TC-8a torony TC-8b torony SPF-20 tűző és hajtóegység Lrsdpfxovgvyuj Adzjr FC-20 trimmelő egység Papírméret: A5-B3 közötti

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 stitch- fold- trimming unit 304 QSM 2 stitching head Hohner Universal 48/5 front cut stream delivery Lrodpfsxnb Agex Adzsr TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Delivery time: immediately from stock

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Ledpfx Adexnb Hfezsrr Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)