Used Briquetting presses for sale (38)

Condition: like new (used), Year of construction: 2015, operating hours: 450 h, Functionality: fully functional, machine/vehicle number: 2424, total width: 2,400 mm, total height: 2,200 mm, total length: 2,900 mm, briquette diameter: 80 mm, input current: 105 A, input voltage: 400 V, oil tank capacity: 850 l, power: 55 kW (74.78 HP), motor voltage: 400 V, Equipment: emergency stop, Selling our briquette press from RUF Briquetting Systems. The machine is from week 49/2015, but has only had a few operating hours (450 BH), so wearing parts are almost as good as new. Cgob E D Nwevzbt Nsmot The press is powered by a 55kW motor. The specific pressing pressure is a maximum of 5000 kg/cm2. The maximum throughput for the different materials is: Aluminum: 1300 kg/h Steel & cast iron: 2800 kg/h Brass, bronze, copper: 2700 kg/h Titanium: 1000 kg/h The machine can be inspected at any time. Further information and pictures are available in direct exchange.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Cjb E D Njgbpm Tewmjgt Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: used, Revolving briquetting press RUF type RBK 55/2500/120 S Hydraulic pellet press or briquetting press for grinding sludge, metal chips, or similar No. 70002 Year of construction 2009 Briquette diameter 120 mm Briquette length in the pre-compactor approx. 120 mm Pressing force in the pre-compactor 30 tons at 260 bar Briquette length in the main compactor approx. 80 mm Pressing force of the main press cylinder 250 tons at 260 bar Stroke size of the main press cylinder 120 mm Cgsb Eshg Uz Ie D Nwmjt Pressing force of the counter-press cylinder 250 tons at 260 bar Stroke size of the counterpress cylinder 15 mm Piston diameter of the main press cylinder 350 mm Press stroke Cycle time approx. 30 sec. for grinding sludge with low residual oil content Hopper size of the screw conveyor 1000 x 600 mm Hydraulic motor power 37 kW Mains connection 400 Volt, 50 Hz, 45 kW - Revolver with 5 stations for high material throughput - Pre-compressor stage for pressing material into the turret disk - 2 opposing main press cylinders with 120 mm and 15 mm stroke - Ejection cylinder for ejecting the finished briquettes from the turret disk - Infinitely variable adjustment of the hydraulic speed for each pressing stage - was used for grinding sludge from metal processing - Material hopper as hopper with screw conveyor - the machine was completely overhauled at RUF in 2018 - a new SIEMENS Simatic touch panel was installed in 2020 - only a few operating hours after the overhaul very good condition Grinding sludge recycling - great savings through cooling lubricant recovery - Large savings in disposal costs due to the reduction in volume and weight of the grinding sludge - Grinding sludge briquettes with a low residual oil content can possibly be classified as "non-hazardous waste".

Condition: used, Year of construction: 2020, operating hours: 5,200 h, Functionality: fully functional, machine/vehicle number: 3096, Model/ Type: RUF 15/1700/150x60 Ma.Nr. / Ma.No.: 3096 Year of construction: 2020 Drive motor: 15 kW Throughput capacity up to max.: 500 kg/h (depending on material) Press pressure: 1700 kg/cm² Briquette format: 150x60mm Operating hours / Running hours: approx. 5,200 h approx. 5,200 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 4 - 8 weeks after receipt of down payment approx. 4 - 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1.000mm Hopper Cjb E D Net Sgtfswmegt + Elektrische Emulsionspumpe / Electrical emulsion pump + Spraying device / Spraying device

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, Amis ZBP 50 S Duo sawdust briquetting machine Year of production 2019 Load capacity up to 140 kg depending on material Cjbsumwm So E D Nwmegt 3.800 working hours Briquettes Ø 50 mm Tank with a capacity of 1.2 m³ Roller with feeder Pre-ironing Screw conveyor Hydraulic pump motors, 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank 100 l SIEMENS control system Dimensions length x width x height 3000 x 2400 x 1700 mm Weight 2000 kg The price of the new machine is 39.800 Euro

Condition: as good as new (ex-display), Year of construction: 2023, at a special price of €14,995 net Consists of press and extraction 1) Briquetting press: Your advantages: + very robust, simple technology + top price-performance ratio + suitable for continuous operation + long-standing, well-functioning / established machine Including control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Ceb E Deg Uwhte Nwmogt Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput up to 20 kg / h *depending on material Dimensions of the machine approx.: 137 x 75 x 210 cm (length x width x height), Weight of the machine: approx. 350 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust less than 15 mm in length -Moisture content less than 18% ATRO -Sand, stones, metals and minerals increase wear --- Options at extra cost: * Level sensor for automatic operation + € 995 net Press starts and then stops automatically ----- 2) Extraction: Motor: 2.2 kW Volume: 1400 m³/h Noise level: 87 dB (A) Weight: 160 kg. with 2 extraction connections - 100 mm each Filter unit: The filter chamber contains class L or M filters, which, thanks to a large surface and high filtration efficiency (3 micrometers), ensure a high dust retention capacity and air purity at the outlet. *Accessories and hoses on request *Larger or smaller extraction devices on request (0.75/1.5/2.2/3.0 kW) *Atex version optionally available Surcharge + €980 net

Condition: used, Year of construction: 2023, operating hours: 41 h, Functionality: fully functional, machine/vehicle number: 3617, Model/ Type: RUF 15/4000/70 Ma.Nr. / Ma.No.: 3617 Year of construction: 2023 Drive motor: 15 kW Throughput capacity up to max.: 450 kg/h (depending on material) Press pressure: approx. 4000 kg/cm² Briquette size: 70mm Csbst Sgrzj E D Nwmjgt Operating hours / Running hours: approx. 41 h approx. 41 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid / Hopper extension with grid + Elektrische Emulsionspumpe / Electrical emulsion pump + Sprüheinrichtung / Spraying device + Inspection door in hopper / Inspection door in hopper

Condition: reconditioned (used), Used machine in very good condition with only 961 operating hours! Year of construction: 06/2017 bought as seen High pressing pressure: Special max. pressing pressure: 1700 kg/cm2, Throughput capacity up to approx. 300-500 kg per hour *dependent on material, exact statement after test with your material. Main motor: 15 kW, screw motor: 1.5 kW Oil cooler: 0.75 kW Agitator: 0.37 kW Weight: approx. 3900 kg Briquette size: 150x60mm. Cgob E D Nwou Tkw Njmst Requirements for the raw material: - Maximum chip length 20 mm - The feed must be free of magnetic metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result . The residual moisture in the briquette cannot be determined without a test. If the residual moisture in the briquette is a purchase criterion, the machine must be tested before purchase and the residual moisture determined by a waste disposal company.

Condition: used, Year of construction: 2017, operating hours: 381 h, Functionality: fully functional, machine/vehicle number: 2575, Model/ Type: RUF 18,5/5000/80 Cgsbjt Sfxmo E D Nwmot Ma.No. / Ma.No.: 2575 Year of construction: 2017 Drive motor: 18.5 kW Throughput capacity up to max.: 550 kg/h (depending on material) Press pressure: approx. 5000 kg/cm² Briquette size: 80mm Operating hours / running hours: approx. 381 hrs. approx. 381 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1.000mm Hopper + Elektrische Emulsionspumpe / Electrical emulsion pump + Spraying device + Extractable screw / Extractable screw Speed-controlled pump + Speed-controlled pump

Condition: as good as new (ex-display), Year of construction: 2023, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity up to 25 kg / h *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: -Timer function + 490 € net Cgobefci D As E D Nwmjt Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + 690 € net (delivery time then approx. 8 weeks) ---

Condition: used, Year of construction: 2015, operating hours: 625 h, Functionality: fully functional, machine/vehicle number: 11295, Model/ Type: RUF 4/2400/60x60 Ma.Nr. / Ma.No.: 11295 Year of construction: 2015 Drive motor: 4 kW Throughput capacity up to max.: 100 kg/h (depending on material) Press pressure: approx. 2400 kg/cm² Briquette format: 60x60mm Operating hours / running hours: approx. 625 hrs. approx. 625 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Csb E Djt Sfw Nj Nwmjgt Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1.000mm Hopper + Elektrische Emulsionspumpe / Electrical emulsion pump + Spraying device / Spraying device

Condition: good (used), Technical data: Briquetting press RUF RB 440 Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Csb E D Njt H D Ezewmjgt Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: good (used), Good, used condition Cobjt Hxuds E D Nwmegt Few operating hours Motor: 11 kW Throughput up to a maximum of 200 kg / h Briquette: 150x60 mm