Used Weber Compactor for sale (105)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: Dsdsyx Dwkspfx Aitjci HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), functionality: fully functional, Skinner / Derinding / Derinding machine Weber type ASB 400 for manual operation with work table & fully automatic operation with feed belt, completely stainless steel. Like new!!! Dodpeyzb Hzjfx Aitoci

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm Dsdpfx Aev Tahisiteci -Weight: 8.7 kg

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp Dedpfxsdp Dvts Aiteci -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available Dcsdpsw Dbkrefx Aitji -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: good (used), Floor cutters, asphalt cutters, concrete cutters Dcjdsdp Dvpopfx Aitsi -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm Dcedpfxob A I Hie Aitei -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece

Year of construction: 1989, condition: good (used), Power trowel, concrete trowel, screed trowel Dcjdpob A Hdfofx Aitji -without a flat iron -Weight: 60 kg

Year of construction: 2000, condition: used, Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator Dodshx E Ukopfx Aitjci -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg -Dimensions: 900/580/H1450 mm -Total weight: 454 kg

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: Dcodpfx Aex U A Iaeitei The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1994, Model: NE 12 Screw type: Single screw Year of construction: 1994 Screw diameter: 130 mm L/D ratio: 30 L/D Drive power: 350 kW Dsdpsyxpbuofx Aitjci Including: • Machine was in production when dismantled • Machine was producing 710 mm pipes • Output on HDPE approximately 1,000 kg/hour • 800 mm extrusion head

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Dcjdjyx Dw Dspfx Aitji Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Year of construction: 1990, Used Weber wide belt sanding machine with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Used as a backup machine. Dsdpfjwzlqksx Aitoci

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S Dcsdpfoywr Tdex Aitei

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. Dodjxf Up Ujpfx Aitsci The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Dcsdpfx Aiet H Rrzstsi Location: Pirmasens We will be happy to send you further information on request.

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm Dcodpfx Aisid Sgmjtsi hight of the coil: max. 800 mm

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm coil hight: max. 800 mm Djdpfxodx Ryye Aitjci

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Dedpfxjyx H E De Aitoci

Year of construction: 2022, condition: used, For inquiries regarding the machine, Mr. Herden (by phone) will be happy to assist you. Weber CR 8 Hatz Diesel Vibratory Plate Compactor / Year of Manufacture: 2022 / Only 117 hours / Electric Start / DEMO Unit Sales Price: €7,990.00 net / €9,508.10 gross Technical Data: - Engine: Hatz Diesel - Max. engine power: 10.0 kW (13.6 hp) - Weight: 601 kg - Centrifugal force: 75 kN - Frequency: 67.5 Hz - Working width: 70 cm The reversible soil compactors of the CR series impress with strong compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced operating characteristics, high smooth running, and low hand-arm vibrations ensure superior operator comfort. CR 8 – The new upper class: powerful, robust, and reliable: - Infinitely variable forward and reverse movement - Hydraulic throttle control and hydraulics routed and protected inside the guide handle - Low hand-arm vibrations Dcsdpfx Aijyxagbjtei - Fatigue-free operation with the height-adjustable control handle - Protection for machine and engine thanks to a protective frame and full engine housing - Reduced maintenance due to self-tensioning centrifugal clutch - Easy service, as all maintenance elements are easily accessible - Safe and fast loading thanks to the large, foldable lifting eye - Secure strapping for transport thanks to additional lashing points on the engine console - Enhanced operating comfort with electric start and hour meter - Areas of application: road and civil engineering, trench construction, subbase for paving and compaction of sand, gravel, or crushed stone We have a large selection of various vibratory plate compactors in stock and immediately available! Mr. Herden (by phone) is happy to assist you. Upon request, we are also pleased to provide you with a financing offer. We are official sales and service partner for Weber MT, Magni telehandlers, Gierking GMT, OilQuick, Holp, DMS, Seppi M., Westtech, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the full Weber MT product range! Errors and prior sale excepted! Internal No: 066141 = More Information = Unladen weight: 601 kg Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 1989, machine/vehicle number: NE 60 053, Brand: Hans Weber Type: NE 60 Serial No.: NE 60 053 Dcjdpfx Aeylv A Roitji Year of manufacture: 1989

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Dedpfx Aievuzqzotsci Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Dodpfx Aijq Tr Tbetoci - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: good (used), WEBER tube extrusion line including: Djdovryhyspfx Aitsci WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Dcedpfx Aoqpft Ioitsi - Screw Ø: 65 mm - Working hours: 102.364