Used Mitsubishi Electric Motor for sale (363)

Condition: like new (used), Year of construction: 2017, operating hours: 280 h, functionality: fully functional, machine/vehicle number: CR751, input voltage: 400 V, type of input current: three-phase, number of axes: 6, Equipment: documentation/manual, TECHNICAL DETAILS Number of axes: 6 MACHINE DETAILS Robot controller: Mitsubishi MELFA Input voltage: 400 V Type of current: Three-phase Operating hours: 280 h EQUIPMENT Guodpfx Anj Ahn Efowji Original Mitsubishi robot controller Teach pendant / programming handheld device Software and programming equipment Robot connection cable and accessories Vacuum gripper Complete robot system Low operating hours, not used in continuous series production Documentation/manual

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Godpfx Aju Ur Raonwoui

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Z 400 mm Gusdsz D Egrepfx Anwji Including coolant system Water bath machine

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Gsdpfx Aezuvyasnwsui Year of manufacture: 2014, available from the end of August.

Condition: excellent (used), Year of construction: 2022, operating hours: 819 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 3,030 mm, total width: 2,687 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, Wire EDM machine MV2400S Gsdpfx As Aaz I Dsnwjui Year of manufacture: 2022 Available immediately

Condition: good (used), Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Voltage: see nameplate -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Design: B3 Guodped Tgapofx Anwsi -Dimensions: 360/270/H205 mm -Weight: 30 kg

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Control System Manufacturer: Mitsubishi Axis Strokes Number of axes: 3 Technical Features Maximum taper angle: 15° / 260 mm Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Guedpfx Anez Sp Udswoi Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Condition The machine is still connected to the power supply and energized.

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Guedpfjx Dw Nujx Anwoi

Condition: ready for operation (used), Mitsubishi Electric RV-7FM-D1-S15 industrial robot SN: FG606002R – minor damage at the air connection, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire about costs for packaging and shipping separately! The following components are also available in our shop: Controller "Mitsubishi CR750-07VD1-1-S15" / Connection cable "BKO-FA0741H05-D" / Connection cable "BKO-FA0739H05-D". Godpfex Dw Nzox Anweui

Condition: ready for operation (used), Mitsubishi Electric MECHA CR750-07VLD1-1-S15 robot controller SN: F1A803065M, used, in good condition, fully functional, scope of delivery as per photos. The following components are also available in our shop: connection cable "Mitsubishi Electric BKO-FA0741H07-D" / robot "Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot" / connection cable "Mitsubishi Electric BKO-FA0739H07-D". Gsdpfxjx Dw Nnj Anwjui

Condition: ready for operation (used), Mitsubishi Electric CR750-07VD1-1-S15 robot controller SN: F1A606002M, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. The following components are also available in our shop: Connection cable "Mitsubishi Electric BKO-FA0739H05-D" / Robot "Mitsubishi Electric RV-7FM-D1-S15 industrial robot" / Connection cable "BKO-FA0741H05-D". Gusdpsx Dw Nbsfx Anwji

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 32228379, cooling capacity: 110.6 kW (150.37 HP), type of cooling: air, overall weight: 1,340 kg, total width: 1,100 mm, total length: 3,225 mm, total height: 2,400 mm, We are offering this like-new Mitsubishi Electric MEHP-IS-G07 0112 air-cooled chiller, manufactured in 2026. Manufacturer: Mitsubishi Electric Model: MEHP-IS-G07 0112 Serial Number: 32228379 Confirmation Number: 250204110 Customer Order Number: 4501557791 Order Date: November 21, 2025 If you have any questions or require further information, please do not hesitate to contact us. The stated price does not include shipping costs. Gsdpfx Aoz N Hupjnwjui

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Gusdpfxe Agggye Anwoi Equipment and accessories: Original wire guides - upper and lower Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Precision vice for clamping workpieces 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: used, power capacity 26 kW volt 200 V ampere 139 A Guodpoy S D Ivsfx Anwsi revolutions per minute 1150/3450/6000 U/min For sale is a functional MITSUBISHI SJ-26BZ spindle motor AC spindle motor 15kW for Mazak machines WEIGHT: approx. 230kg

Condition: used, power capacity / kW volt / V ampere / A MITSUBISHI ELECTRIC CORPORATION Gsdpfx Asyn Sbusnwjui AC SERVO MOTOR HA200C SERIAL: 0Y475

Condition: ready for operation (used), Mitsubishi HA 830-S Z636836 AC servo motor, serial number: N26601026, with Sanyo Denki A RST-5 XB-11 rotary encoder, serial number: 059054S. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Gods Ahvf Sopfx Anwjui

Condition: ready for operation (used), Mitsubishi HA 400-S Z636834 AC servo motor, serial number: N25478059, with Sanyo Denki ARST-3 XB-11 rotary encoder, part number: 0644105, used, in good condition, 100% functional, scope of delivery as shown in the photos. Guedpfxe Ahvf Is Anwsi

Condition: used, power capacity // kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m MITSUBISHI ELECTRIC CORP. AC SERVO MOTOR HA300C Guedpfx Asymgapenwsi SERIAL: 0Z137 + TAMAGAWA FA-CODER TYPE: OSE 5KN-6-12-108

Condition: ready for operation (used), Mitsubishi Electric CR750-20HD1-1-S15 industrial robot, SN: F1A508143M, single phase AC200-230V 50/60 Hz, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Gusdpfx Ajx Dw Nhonwei

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Guedpfoucwzaox Anwoi Price between €300-1000 each. Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: used, Year of construction: 2011, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, Wire EDM Machine Manufacturer: MITSUBISHI Model: FA20S Year of manufacture: 2011 Control system: MITSUBISHI W31FSA Technical details: X-axis: 500 mm Y-axis: 350 mm Z-axis: 430 mm Guedpsz St Tdsfx Anwei Workpiece weight: approx. 1,500 kg Condition: Used Technical features & accessories: - External wire pay-off unit - External electrical cabinet - External dielectric tank (TFA20S-A) - External generator Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, mileage: 171,770 km, power: 92 kW (125.09 HP), first registration: 06/2004, fuel type: diesel, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, Year of construction: 2004, TARGA: GS717AP TITLE: MITSUBISHI CANTER 3.0 HOOK LIFT, LEAF SPRUNG FRONT AND REAR REF: 24C32 YEAR: 06/2004 HORSEPOWER: 125 DISPLACEMENT: 2977 cc EMISSIONS CLASS: Euro 3 KILOMETRES: 171,770 GEARBOX: manual DIFFERENTIAL LOCK: no Guedpfxsuznrvo Anwji RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2500 mm TOWING CAPACITY: yes ORIGIN: imported CAB: short, low SEATS: 3 PAYLOAD: 1,300 kg - GVW (Tractor): 3,500 kg fully loaded - GVW (Tractor + Trailer): 7,000 kg fully loaded BODY TYPE: hook lift HOOK LIFT MODEL: PRISMAG 3 TON TELESCOPIC (extendable): no SWIVEL: no ROLLER: no ADR: no ACCESSORIES: - Hook height: 90/92 cm - Channel width: 88 cm - Body ref. 24-U-30 BODYWORK CAPACITY MAX: 3.15 m + 0.14 m OVERALL LENGTH: 4.60 m OVERALL LENGTH WITH CONTAINER: 5.00 m REFURBISHED: yes INSPECTED: 10/04/2024 TYRES: 100% NEW PRICE: €24,500.00 + VAT – including body 24-U-30 Displayed prices do not include VAT. Please contact our sales team for an up-to-date quote and terms. For more information: Loris: 3484773001‬ URL: #hookliftspecialists AURORA HOOK LIFTS operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste management sector. Experts in trucks, trailers, and hook lift equipment. With a stock of over 50 trucks and more than 150 bodies and containers, available for immediate delivery, with and without hook lift cranes. E.&O.E. (Errors and omissions excepted) Due to the high volume of listings and details provided, Aurora advises verifying the accuracy of the data with our sales team.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 400 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details. Guodpjz E Su Esfx Anwji - Machine Type: Wire Electrical Discharge Machine- Series: MP Series (Water Technology)- Type: TYPE II- Controller: D-CUBES- Power Supply: 3PE 50Hz AC200V, 35A, SCCR 2.5kA- Air Source: 0.5 MPa, 75 L/min- Operating Hours:- Machining Time: 3711- Start Time 1: 26- Start Time 2: 4137- Off Time: 426

Condition: used, power: 110 kW (149.56 HP), first registration: 02/2015, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, LICENSE PLATE: EY907JS TITLE: NEW MITSUBISHI FUSO 7C15 ROLL-OFF TRUCK, FRONT AND REAR LEAF SPRING SUSPENSION, RIGHT-HAND DRIVE, REQUIRES A CLASS C LICENSE REF: 24C40 YEAR: 02/2015 HORSEPOWER: 150 Godpfx Anezqppyswjui ENGINE DISPLACEMENT: 2998 EURO STANDARD: 6 KILOMETERS: 0 with new original engine TRANSMISSION: automatic DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2800 TOWING CAPABILITY: yes ORIGIN: Italy CABIN: short and low NUMBER OF SEATS: 3 PAYLOAD: 4250 kg - TRACTOR UNIT: 7500 kg at full load - TRACTOR UNIT + TRAILER: 11000 kg at full load BODY TYPE: new roll-off ROLL-OFF MODEL: TAM TE6-32 SLIDING: yes CRANE: no ROLLER: vertical ADR: no DIMENSIONS FOR BODY INSTALLATION: FROM: 2.70 m + 0.16 m TO: 3.50 m + 0.16 m OVERALL LENGTH: 5.30 m OVERALL LENGTH WITH CONTAINER: 5.60 m FRONT CABIN WIDTH: 1.95 m REAR WIDTH BEHIND AXLE: 2.00 m REFURBISHED: yes SERVICED: yes TIRES: 80% front - 50% rear PRICE: 46,500.00 + VAT. Errors and omissions excepted. The prices listed do not include VAT. Please contact the sales representative for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA ROLL-OFF TRUCKS operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specializing in trucks, trailers, and roll-off equipment. With a readily available fleet of over 50 trucks and over 150 roll-off containers, with and without cranes. S.E.&O. Due to the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate present AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input: 200-230V, 50/60Hz, IP 44 Frame: B112FU Gedpfx Aezq Atlenwjui IEC 34-1, 1994, Manual No. BNP-B3759 Ambient temperature: 0-40 °C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,750.00 net, ex works, plus packaging costs. All technical data is subject to typographical errors and changes. Sale exclusively to countries within the EU.