Used Mitsubishi Robot for sale (369)

Condition: used, Mitsubishi Type: RH-3FH5515-1D1-S15 + CR751-03HD1-0-S15 Mitsubishi Industrial Robot Payload (kg): 3 Degrees of Freedom: 4 Speed (mm/s): 7200 Repeatability (mm): 0.01 Cycle Time (s): 0.44 Max. Reach Radius (mm): 400 Operating Range J1 (degrees): 264 Hfjdszd Tutopfx Aipon Operating Range J2 (degrees): 282 Operating Range J4 (degrees): 720 Stroke of Z-axis (mm): 180 Controller Type: CR751-D Protection Class: IP20 Power Supply: 1 Phase (VAC) 200-253 Power Consumption (VA): 500 Product Dimensions & Weight Width (mm): 130, Height (mm): 511.5, Depth (mm): 580 Weight (kg): 14 Condition: used Scope of Delivery: (See Image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Mitsubishi Mitsubishi Industrial 6-Axis Articulated Arm Robot RV Series Industrial Robots Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes: 6 Maximum lifting capacity: 3.5 kg Reach radius: 642 mm Weight: 38 kg Condition: used Hfjdpszdyuaofx Aipjn Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Mitsubishi Type: Melfa RV-3SB Industrial 6-axis articulated arm robot 6-axis articulated arm robot RV-3SB Maximum payload: 3.5 kg Weight: 38 kg Robot controller CR2B-574-S312 Hodpfx Aozd T Uajipsfn Teach pendant R46TB with color/touch display Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Mitsubishi Type: RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for maximum quality. Number of axes: 6 Maximum lifting capacity: 3.5 kg Reach radius: 642 mm Weight: 38 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone. Hjdpfx Aszdyt Noipofn

Condition: used, Mitsubishi Hfedpozdiuksfx Aipen Type: Mitsubishi Melfa RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling up to 3.5 kg. The enclosure, which meets the IP 65 standard, ensures operation under extreme conditions. Special Features: • Adjustment of axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Encapsulated design • Adaptive speed optimization Feature/Function Degrees of Freedom (Number of Axes) 6 Design: Standard (Oil Mist) Mounting: Floor, wall or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive System: AC servo (all axes with brake) Position Detection: Absolute encoder Range of Motion: Degrees Body (J1) 340 (−170 to +170) Shoulder (J2) 225 (−90 to +135) Elbow (J3) 191 (−20 to +171) Forearm Rotation (J4) 320 (−160 to +160) Wrist Bend (J5) 240 (−120 to +120) Wrist Rotation (J6) 720 (−360 to +360) Movement Speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm Rotation (J4) 412 Wrist Bend (J5) 412 Wrist Rotation (J6) 660 Resultant Maximum Speed 5500 mm/s Lifting Force Nominal value 3kg Maximum value 3.5kg Reach Radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot Controller: CR1DA-721-S15 (230V) Teachbox: R46TB with color/touch display Technical Data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection Type: Connection to the robot controller with a circular connector, cable length 7 m Interfaces: RS422 For connection to the robot controller Display/Screen: Touch-sensitive 6.5" TFT monitor with backlight and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: FA408001R, overall weight: 32 kg, load capacity: 3 kg, arm reach: 550 mm, pivoting range: 550 °, controller manufacturer: MISUBISHI, controller model: CR751-D, teach pendant manufacturer: MITSUBISHI, teach pendant model: TUCHPAD, control cabinet width: 600 mm, control cabinet height: 120 mm, input voltage: 220 V, type of input current: AC, repeat accuracy: 0.01 mm, MITSUBISHI scara robot +controller+ touchscreen Hfjdozzmqispfx Aipen

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Hfjdpfex Dw Nusx Aipon

Condition: ready for operation (used), Mitsubishi Electric RV-7FM-D1-S15 industrial robot SN: FG606002R – minor damage at the air connection, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire about costs for packaging and shipping separately! The following components are also available in our shop: Controller "Mitsubishi CR750-07VD1-1-S15" / Connection cable "BKO-FA0741H05-D" / Connection cable "BKO-FA0739H05-D". Hodpfxox Dw Nzj Aipefn

Condition: ready for operation (used), Mitsubishi Electric MECHA CR750-07VLD1-1-S15 robot controller SN: F1A803065M, used, in good condition, fully functional, scope of delivery as per photos. The following components are also available in our shop: connection cable "Mitsubishi Electric BKO-FA0741H07-D" / robot "Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot" / connection cable "Mitsubishi Electric BKO-FA0739H07-D". Hfedpfxex Dw Nno Aipon

Condition: ready for operation (used), Mitsubishi Electric CR750-07VD1-1-S15 robot controller SN: F1A606002M, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. The following components are also available in our shop: Connection cable "Mitsubishi Electric BKO-FA0739H05-D" / Robot "Mitsubishi Electric RV-7FM-D1-S15 industrial robot" / Connection cable "BKO-FA0741H05-D". Hfsdpfex Dw Nbsx Aipon

Condition: used, mileage: 171,770 km, power: 92 kW (125.09 HP), first registration: 06/2004, fuel type: diesel, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, Year of construction: 2004, TARGA: GS717AP TITLE: MITSUBISHI CANTER 3.0 HOOK LIFT, LEAF SPRUNG FRONT AND REAR REF: 24C32 YEAR: 06/2004 HORSEPOWER: 125 DISPLACEMENT: 2977 cc EMISSIONS CLASS: Euro 3 KILOMETRES: 171,770 GEARBOX: manual DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2500 mm TOWING CAPACITY: yes ORIGIN: imported CAB: short, low SEATS: 3 PAYLOAD: 1,300 kg - GVW (Tractor): 3,500 kg fully loaded - GVW (Tractor + Trailer): 7,000 kg fully loaded BODY TYPE: hook lift HOOK LIFT MODEL: PRISMAG 3 TON TELESCOPIC (extendable): no SWIVEL: no ROLLER: no ADR: no ACCESSORIES: - Hook height: 90/92 cm - Channel width: 88 cm - Body ref. 24-U-30 BODYWORK CAPACITY MAX: 3.15 m + 0.14 m OVERALL LENGTH: 4.60 m OVERALL LENGTH WITH CONTAINER: 5.00 m REFURBISHED: yes INSPECTED: 10/04/2024 TYRES: 100% NEW Hodpsuznrvjfx Aipjfn PRICE: €24,500.00 + VAT – including body 24-U-30 Displayed prices do not include VAT. Please contact our sales team for an up-to-date quote and terms. For more information: Loris: 3484773001‬ URL: #hookliftspecialists AURORA HOOK LIFTS operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste management sector. Experts in trucks, trailers, and hook lift equipment. With a stock of over 50 trucks and more than 150 bodies and containers, available for immediate delivery, with and without hook lift cranes. E.&O.E. (Errors and omissions excepted) Due to the high volume of listings and details provided, Aurora advises verifying the accuracy of the data with our sales team.

Condition: ready for operation (used), Mitsubishi Electric CR750-20HD1-1-S15 industrial robot, SN: F1A508143M, single phase AC200-230V 50/60 Hz, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Hedjx Dw Nhopfx Aipjfn

Condition: used, Year of construction: 2011, control MITSUBISHI W31FSA x-axis 500 mm y-axis 350 mm z-axis 430 mm workpiece weight ca. 1.500 kg Condition: used Hedpfez St Tdjx Aipofn Technical features & accessories: - external wire-uncoiling unit - external electrical cabinet - external dielectric tank TFA20S-A - external generator Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 2011, An industrial articulated robot Mitsubishi including control unit, teaching box and work table is available. Payload: 3.5kg, axes: 6, reach: 642mm, repeatability: +/-0.02mm, upper arm length: 245mm, forearm length: 270mm, weight: approx. 40kg. Documentation available. An on-site inspection is possible. Hsdjynauiopfx Aipjfn

Condition: used, power: 110 kW (149.56 HP), first registration: 02/2015, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, LICENSE PLATE: EY907JS TITLE: NEW MITSUBISHI FUSO 7C15 ROLL-OFF TRUCK, FRONT AND REAR LEAF SPRING SUSPENSION, RIGHT-HAND DRIVE, REQUIRES A CLASS C LICENSE REF: 24C40 YEAR: 02/2015 HORSEPOWER: 150 ENGINE DISPLACEMENT: 2998 EURO STANDARD: 6 KILOMETERS: 0 with new original engine TRANSMISSION: automatic DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2800 TOWING CAPABILITY: yes ORIGIN: Italy CABIN: short and low NUMBER OF SEATS: 3 PAYLOAD: 4250 kg - TRACTOR UNIT: 7500 kg at full load - TRACTOR UNIT + TRAILER: 11000 kg at full load BODY TYPE: new roll-off ROLL-OFF MODEL: TAM TE6-32 SLIDING: yes CRANE: no ROLLER: vertical ADR: no DIMENSIONS FOR BODY INSTALLATION: FROM: 2.70 m + 0.16 m TO: 3.50 m + 0.16 m OVERALL LENGTH: 5.30 m OVERALL LENGTH WITH CONTAINER: 5.60 m FRONT CABIN WIDTH: 1.95 m REAR WIDTH BEHIND AXLE: 2.00 m REFURBISHED: yes SERVICED: yes TIRES: 80% front - 50% rear PRICE: 46,500.00 + VAT. Errors and omissions excepted. The prices listed do not include VAT. Please contact the sales representative for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA ROLL-OFF TRUCKS operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Hfsdpfx Aiszqppyepjn Specializing in trucks, trailers, and roll-off equipment. With a readily available fleet of over 50 trucks and over 150 roll-off containers, with and without cranes. S.E.&O. Due to the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: used, mileage: 170,000 km, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, spoiler, tail-lift, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 4.358 kg Carrying capacity: 3.132 kg GVW: 7.490 kg Tail lift: 1000 kg = Additional options and accessories = - Airbag - Beifahrerbank - Front center armrest - Outside temperature display Hedjzzc Iwspfx Aipsfn - Radio - Roof spoiler - Suspension seat - Tachograph - Tined glass - Toolbox

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 14 kg, load capacity: 3 kg, arm reach: 400 mm, Number of Axes / Scara (Horizontal Type) / 4 Axes Maximum Load Capacity / 3 kg Z-axis Stroke / 180 mm Hfodpfxoza D Hts Aipon Accuracy / ±0.01 mm in the X-Y and Z axes, ±0.01° in the rotation axis Maximum Speed / 7200 mm/s Weight / 14 kg Environmental Protection Class / IP20 Mounting Type / Floor-mounted

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Hfodpfxsywftkj Aipsn

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F26-00153, Year of construction: 1997, operating hours: 775 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, gearing type: automatic, tire condition: 85 %, overall weight: 8,430 kg, empty load weight: 4,930 kg, color: green, Equipment: cabin, head guard, lighting, For sale: forklift - Mitsubishi FD35A Diesel, manufactured in 1996. - Hour meter reading: 775 operating hours. - Lifting capacity: 3.5 tons. - Mast lift height: 360 cm. - Own weight: 4930 kg. Hfsdpfx Aioz Sal Ijpsn - Complete lighting system. - Forklift in very good condition.

Condition: excellent (used), Year of construction: 2021, SN: 01CS4056, Gewicht 5900 kg, Arbeitsbereich 1.250 x 1.020 x 505 mm, Tischbelastung max. 3.000 kg, Steuerung, Schalt-/Steuerschrank, Nullpunkt-Spannsystem, m. Zubehör Hfedpfszlfa Rsx Aipen Der Preis versteht sich als Netto-Ab-Werk-Preis. Demontage, Hebearbeiten und Verladung erfolgen auf Kosten und Risiko des Käufers."

Condition: used, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Year of construction: 2004 Hsdez Srgiopfx Aipefn Empty weight: 24.500 kg Fuel tank: 7500 litres Generator capacity: 2.000 kVA Current frequency: 60 Hz

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Hsdpfsz Hzz Djx Aipsfn

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, wire diameter (max.): 0.3 mm, table load: 3,000 kg, controller manufacturer: MITSUBISHI, controller model: MV-4800, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15" touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details. - Travel (U, V): ±100 mm- Maximum Workpiece Dimensions: 1200 x 1020 x 505 mm- Maximum Workpiece Weight: 3000 kg- Table Base: Closed mounting base, 4-side hardened frame table- Drive System: Tubular direct drives in X/Y axes, Optical Drive System (ODS)- Measuring System: Linear scales in X, Y, U, V axes- Wire Threading: Intelligent AT - Automatic wire threading without water jet (for wire diameter 0.15 - 0.3 mm)- Wire Station: 20 kg wire station- Control Unit: MITSUBISHI ELECTRIC ADVANCE M700 with 15" Touch Screen- Control Features: 3D CAD/CAM on board, 10 GB user hard drive, ESPERADVANCE dialog system, 3D Parasolid import, 3D graphic check, Hand pilot- Control Interfaces: Ethernet TCP-IP, 2 x USB Port, prepared for mcAnywhere- Generator & Processing Technologies: - PFC (Precise Finish Circuit) high-speed sensing - HSS-AE Anti-Electrolysis Generator - ECONO CUT wire consumption reduction - POWER MASTER process safety system - CORNER MASTER³ radius shaping - ORBIT MASTER circular machining - DIGITAL AE II parallelism optimization - SL-CONTROL for height steps - TS-MASTER for homogeneous surface structures- Equipment: Automatic fine hole search, Easy 3D-Setup, Wire alignment block, Wire chopper, Compressor cooler, E.KO IONISER Hjdpfx Aisz Nk T Nopsfn

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm Hjdpfozqu Dcsx Aipsfn - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 400 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details. Hfsdpfx Aijz E Su Espjn - Machine Type: Wire Electrical Discharge Machine- Series: MP Series (Water Technology)- Type: TYPE II- Controller: D-CUBES- Power Supply: 3PE 50Hz AC200V, 35A, SCCR 2.5kA- Air Source: 0.5 MPa, 75 L/min- Operating Hours:- Machining Time: 3711- Start Time 1: 26- Start Time 2: 4137- Off Time: 426