Used Mitsubishi Diesel Generator for sale (369)

Condition: good (used), Year of construction: 1995, operating hours: 6,420 h, load capacity: 3,000 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: duplex, construction height: 2,400 mm, Mitsubishi FD30 Duplo 360 Sideshift Diesel 1995 Nlodpfe Adr E Ujx Af Eoh A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: like new (used), Year of construction: 2017, operating hours: 280 h, functionality: fully functional, machine/vehicle number: CR751, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Mitsubishi MELFA RV-20FM-D – 6-Axis Industrial Robot Year 2017 | ONLY 280 OPERATING HOURS | Fully Functional | Complete System with Vacuum Gripper We are offering a Mitsubishi MELFA RV-20FM-D 6-axis industrial robot, manufactured in 2017, in excellent condition with only 280 operating hours. The robot was originally purchased for a planned industrial automation project. However, the project was subsequently implemented using a different technology, and the robot was never put into continuous series production. As a result, the robot has been used very little and remains in very good technical condition. This is an excellent opportunity to purchase a high-quality Mitsubishi industrial robot with exceptionally low operating hours, complete with its controller, programming equipment, software, and vacuum gripper. Technical Information Manufacturer: Mitsubishi Electric Model: MELFA RV-20FM-D Year of manufacture: 2017 Operating hours: ONLY 280 hours Robot type: 6-axis articulated industrial robot Condition: Used – excellent, very low usage Functionality: Fully functional Application: Industrial automation, handling, and machine tending Scope of Delivery The complete system includes: Mitsubishi MELFA RV-20FM-D industrial robot Original Mitsubishi robot controller Teach pendant / programming unit Software and programming equipment Robot connection cables and accessories Vacuum gripper / vacuum end-of-arm tooling The robot is supplied as a complete package, ready for integration into a suitable industrial automation application. Typical Applications Pick and place operations CNC machine loading and unloading Automated material handling Machine tending Injection molding machine handling Production line automation Robotic handling and positioning General industrial automation Condition and Operating History ONLY 280 OPERATING HOURS SINCE 2017! The extremely low operating hours are one of the main advantages of this robot. The robot was acquired for an automation project but was never used in regular continuous production. Nedpfx Ae Aarn Isf Eolh It has therefore experienced significantly less operational use than a typical industrial robot of the same age. The robot is fully functional and in very good technical condition. The complete equipment, including the vacuum gripper, is included in the sale. Reason for Sale The original automation project was implemented using alternative technology. The robot is no longer required and is therefore offered for sale. Inspection and Location Location: Slavkov u Brna, Czech Republic (near Brno) Inspection and functional demonstration are possible by prior appointment. Additional photographs and technical information can be provided upon request. International buyers are welcome. Price EUR 12,900 Please feel free to contact us for further information or to arrange an inspection. Mitsubishi MELFA RV-20FM-D – 2017 – Only 280 operating hours – Complete system with vacuum gripper.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: Mitsubishi S4S, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, overall weight: 5,110 kg, empty load weight: 3,500 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 1,300 mm, maximum load weight: 3,500 kg, fuel: diesel, Equipment: 3rd hydraulic function, lighting, pallet forks, sideshift, New price: 12,900 EUR // Old price: 18,900 EUR Mitsubishi IS IN VERY GOOD CONDITION We sell forklifts after a complete service. Prepared for the end-user. We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklift industry in Poland and many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and perform a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to use. In Poland, upon request, we can arrange for the equipment to be inspected and accepted by the State Office of Technical Inspection. Nlodpfx Ae Ad Ilqsf Esh The main mission of our company is to satisfy the customer and solve their logistical problems. We know how to properly prepare the machine and ensure customer satisfaction, leading to recommendations to other customers. We invite you to contact us and utilize our services. Do you need a forklift supplier? Contact us.

Condition: used, operating hours: 48,918 h, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, fork length: 1,210 mm, fork width: 1,000 mm, total height: 2,400 mm, total length: 2,760 mm, total width: 1,310 mm, color: red, Empty weight: 5.450 kg Lifting capacity: 3.000 kg - Documentation available: Yes - └ Type Documentation: User manual - CE certificate present: No - Serial number: F14B32793 - Operating hours: 48918 - Lifting capacity: 3000kg - Lifting height: 4500mm - Overhead clearance: 2400mm - Free lift: 0mm - Fork length: 1210mm - Maximum fork width: 1000mm - Minimum fork width: 240mm - Number of wheels: 4 Wheels - Options: Work lights, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2760mm x 1310mm x 2400mm (l x w x h) - Transport weight [kg]: 5450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nsdpfxjy Tty Re Af Ejlh Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: Mitsubishi S4S, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, overall weight: 5,110 kg, empty load weight: 3,500 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 1,300 mm, maximum load weight: 3,500 kg, fuel: diesel, Equipment: 3rd hydraulic function, lighting, pallet forks, sideshift, New price: 12,900 EUR // Old price: 18,900 EUR Nsdpfx Aez Rznysf Eslh Mitsubishi IS IN VERY GOOD CONDITION We sell forklifts after a complete service. Prepared for the end-user. We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklift industry in Poland and many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and perform a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to use. In Poland, upon request, we can arrange for the equipment to be inspected and accepted by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve their logistical problems. We know how to properly prepare the machine and ensure customer satisfaction, leading to recommendations to other customers. We invite you to contact us and utilize our services. Do you need a forklift supplier? Contact us.

Condition: used, Year of construction: 2011, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, Wire EDM Machine Manufacturer: MITSUBISHI Model: FA20S Year of manufacture: 2011 Control system: MITSUBISHI W31FSA Nlsdpfx Asz St Tdof Esh Technical details: X-axis: 500 mm Y-axis: 350 mm Z-axis: 430 mm Workpiece weight: approx. 1,500 kg Condition: Used Technical features & accessories: - External wire pay-off unit - External electrical cabinet - External dielectric tank (TFA20S-A) - External generator Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, mileage: 171,770 km, power: 92 kW (125.09 HP), first registration: 06/2004, fuel type: diesel, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, Year of construction: 2004, TARGA: GS717AP TITLE: MITSUBISHI CANTER 3.0 HOOK LIFT, LEAF SPRUNG FRONT AND REAR REF: 24C32 YEAR: 06/2004 HORSEPOWER: 125 DISPLACEMENT: 2977 cc EMISSIONS CLASS: Euro 3 KILOMETRES: 171,770 GEARBOX: manual DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2500 mm TOWING CAPACITY: yes ORIGIN: imported CAB: short, low SEATS: 3 PAYLOAD: 1,300 kg - GVW (Tractor): 3,500 kg fully loaded - GVW (Tractor + Trailer): 7,000 kg fully loaded BODY TYPE: hook lift HOOK LIFT MODEL: PRISMAG 3 TON TELESCOPIC (extendable): no SWIVEL: no ROLLER: no ADR: no ACCESSORIES: - Hook height: 90/92 cm - Channel width: 88 cm - Body ref. 24-U-30 BODYWORK CAPACITY MAX: 3.15 m + 0.14 m OVERALL LENGTH: 4.60 m OVERALL LENGTH WITH CONTAINER: 5.00 m REFURBISHED: yes INSPECTED: 10/04/2024 TYRES: 100% NEW PRICE: €24,500.00 + VAT – including body 24-U-30 Displayed prices do not include VAT. Please contact our sales team for an up-to-date quote and terms. For more information: Njdpsuznrvefx Af Eolh Loris: 3484773001‬ URL: #hookliftspecialists AURORA HOOK LIFTS operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste management sector. Experts in trucks, trailers, and hook lift equipment. With a stock of over 50 trucks and more than 150 bodies and containers, available for immediate delivery, with and without hook lift cranes. E.&O.E. (Errors and omissions excepted) Due to the high volume of listings and details provided, Aurora advises verifying the accuracy of the data with our sales team.

Condition: used, Year of construction: 2008, operating hours: 9,240 h, General information Year of manufacture: 2008 Colour: Grey Operating hours: 9.240 Technical information Type of fuel: LPG Empty weight: 4.300 kg Dimensions (LxBxH): 268 x 129 x 259 cm Functional Lifting capacity: 3.000 kg Lift height: 605 cm Clearance lift height: 213 cm Fork dimensions: 1.500 x 970 mm - Year: 2008 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: DF13F-13190 - Operating hours: 9240 - Lifting capacity: 3000kg - Lifting height: 6050mm - Overhead clearance: 2580mm - Free lift: 2130mm - Fork length: 1500mm - Maximum fork width: 970mm Njdpfx Aoyttqhjf Ejlh - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Half cabin, Work lights - Mast: Triplex - Inspection valid until: 06-2025 - Drive: LPG - Motor brand: Mitsubishi - Transport dimensions: 2680mm x 1290mm x 2590mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Nledpfezqu Dcex Af Eeh Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: used, power: 110 kW (149.56 HP), first registration: 02/2015, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, LICENSE PLATE: EY907JS TITLE: NEW MITSUBISHI FUSO 7C15 ROLL-OFF TRUCK, FRONT AND REAR LEAF SPRING SUSPENSION, RIGHT-HAND DRIVE, REQUIRES A CLASS C LICENSE REF: 24C40 YEAR: 02/2015 HORSEPOWER: 150 ENGINE DISPLACEMENT: 2998 EURO STANDARD: 6 KILOMETERS: 0 with new original engine TRANSMISSION: automatic DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2800 TOWING CAPABILITY: yes ORIGIN: Italy CABIN: short and low NUMBER OF SEATS: 3 PAYLOAD: 4250 kg - TRACTOR UNIT: 7500 kg at full load - TRACTOR UNIT + TRAILER: 11000 kg at full load Nedpfxezqppyo Af Eelh BODY TYPE: new roll-off ROLL-OFF MODEL: TAM TE6-32 SLIDING: yes CRANE: no ROLLER: vertical ADR: no DIMENSIONS FOR BODY INSTALLATION: FROM: 2.70 m + 0.16 m TO: 3.50 m + 0.16 m OVERALL LENGTH: 5.30 m OVERALL LENGTH WITH CONTAINER: 5.60 m FRONT CABIN WIDTH: 1.95 m REAR WIDTH BEHIND AXLE: 2.00 m REFURBISHED: yes SERVICED: yes TIRES: 80% front - 50% rear PRICE: 46,500.00 + VAT. Errors and omissions excepted. The prices listed do not include VAT. Please contact the sales representative for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA ROLL-OFF TRUCKS operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specializing in trucks, trailers, and roll-off equipment. With a readily available fleet of over 50 trucks and over 150 roll-off containers, with and without cranes. S.E.&O. Due to the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F26-00153, Year of construction: 1997, operating hours: 775 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, gearing type: automatic, tire condition: 85 %, overall weight: 8,430 kg, empty load weight: 4,930 kg, color: green, Equipment: cabin, head guard, lighting, For sale: forklift - Mitsubishi FD35A Diesel, manufactured in 1996. - Hour meter reading: 775 operating hours. - Lifting capacity: 3.5 tons. Nlsdpez Sal Iefx Af Ejh - Mast lift height: 360 cm. - Own weight: 4930 kg. - Complete lighting system. - Forklift in very good condition.

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Control System Manufacturer: Mitsubishi Axis Strokes Number of axes: 3 Technical Features Maximum taper angle: 15° / 260 mm Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Njdpjz Sp Udofx Af Ejlh Condition The machine is still connected to the power supply and energized.

Condition: used, mileage: 188,000 km, power: 105 kW (142.76 HP), first registration: 06/2006, fuel type: diesel, overall weight: 6,500 kg, color: red, gearing type: mechanical, emission class: euro3, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,200 mm, Equipment: ABS, air conditioning, central locking, crane, Buy online. Finance digitally. Get it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3613] The photos have been processed using AI and are only intended as examples to illustrate the size and equipment of the vehicle. The vehicle is currently being prepared. The images will be updated. ---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * We accept your vehicle as a trade-in, whether old or new Optionally bookable: * 12-60 month used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery---- Mitsubishi Canter 7C14 Tipper | PALFINGER PK 4100 | Air conditioning Load, transport and unload with a single vehicle: Mitsubishi Fuso Canter with a tipper body and a PALFINGER PK 4100 Compact loading crane behind the cab. A versatile combination for construction companies, gardening and landscaping, trades, and material transport. VEHICLE DATA * First registration: 06/2006 * Diesel engine with 105 kW / 143 hp * Displacement: 3,908 cm³ * Manual transmission * 3 seats * Permissible total weight: 6,500 kg * Unladen weight according to vehicle documents: 4,235 kg * Calculated payload according to documents: 2,265 kg * Trailer load, braked: 3,500 kg * Color: Red TIPPER BODY AND LOADING CRANE * Hydraulic tipper body with folding steel side panels * PALFINGER PK 4100 Compact loading crane * Maximum lifting capacity: approx. 1,000 kg * Crane mounted behind the cab and registered in the vehicle registration document * Hydraulically extendable crane boom * Side crane control via joystick * Laterally extendable outriggers with hydraulic support legs * Foldable crane for transport position * Side storage boxes for tools and accessories The loading crane enables the independent loading and unloading of suitable loads within its permissible load diagram. The tipper body also facilitates the unloading of bulk goods and construction materials. OTHER EQUIPMENT * Air conditioning * Suspended ISRI driver's seat * Radio * Digital tachograph * Tow hitch * Orange warning light on the cab * Twin tires in the rear ---- Would you like to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Nljdpfjz D Rydex Af Eeh Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are possible. The photos have been processed using AI and are only intended as examples to illustrate the size and equipment of the vehicle. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: used, mileage: 188,000 km, power: 105 kW (142.76 HP), first registration: 06/2006, fuel type: diesel, overall weight: 6,500 kg, color: red, gearing type: mechanical, emission class: euro3, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,200 mm, Equipment: ABS, air conditioning, central locking, crane, Buy online. Finance digitally. Get it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3613] The photos have been processed using AI and are only intended as examples to illustrate the size and equipment of the vehicle. The vehicle is currently being prepared. The images will be updated. ---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * We accept your vehicle as a trade-in, whether old or new Optionally bookable: * 12-60 month used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery---- Mitsubishi Canter 7C14 Tipper | PALFINGER PK 4100 | Air conditioning Load, transport and unload with a single vehicle: Mitsubishi Fuso Canter with a tipper body and a PALFINGER PK 4100 Compact loading crane behind the cab. A versatile combination for construction companies, gardening and landscaping, trades, and material transport. VEHICLE DATA * First registration: 06/2006 * Diesel engine with 105 kW / 143 hp * Displacement: 3,908 cm³ * Manual transmission * 3 seats * Permissible total weight: 6,500 kg * Unladen weight according to vehicle documents: 4,235 kg * Calculated payload according to documents: 2,265 kg * Trailer load, braked: 3,500 kg * Color: Red TIPPER BODY AND LOADING CRANE * Hydraulic tipper body with folding steel side panels * PALFINGER PK 4100 Compact loading crane * Maximum lifting capacity: approx. 1,000 kg * Crane mounted behind the cab and registered in the vehicle registration document * Hydraulically extendable crane boom * Side crane control via joystick * Laterally extendable outriggers with hydraulic support legs * Foldable crane for transport position * Side storage boxes for tools and accessories The loading crane enables the independent loading and unloading of suitable loads within its permissible load diagram. The tipper body also facilitates the unloading of bulk goods and construction materials. OTHER EQUIPMENT * Air conditioning * Suspended ISRI driver's seat * Radio * Digital tachograph * Tow hitch * Orange warning light on the cab * Twin tires in the rear ---- Would you like to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Nodpfx Afez D Rzuj Eolh Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are possible. The photos have been processed using AI and are only intended as examples to illustrate the size and equipment of the vehicle. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: used, mileage: 170,000 km, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, spoiler, tachograph, tail-lift, Year of manufacture: 2020 Year of construction: 2020 Front axle: Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 4.358 kg Carrying capacity: 3.132 kg GVW: 7.490 kg Tail lift: 1000 kg = Additional options and accessories = Njdpezzc Iwsfx Af Ejlh - Airbag - Beifahrerbank - Front center armrest - Outside temperature display - Radio - Roof spoiler - Suspension seat - Tined glass - Toolbox

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, wire diameter (max.): 0.3 mm, table load: 3,000 kg, controller manufacturer: MITSUBISHI, controller model: MV-4800, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15" touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details. Nljdez Nk T Nepfx Af Eeh - Travel (U, V): ±100 mm- Maximum Workpiece Dimensions: 1200 x 1020 x 505 mm- Maximum Workpiece Weight: 3000 kg- Table Base: Closed mounting base, 4-side hardened frame table- Drive System: Tubular direct drives in X/Y axes, Optical Drive System (ODS)- Measuring System: Linear scales in X, Y, U, V axes- Wire Threading: Intelligent AT - Automatic wire threading without water jet (for wire diameter 0.15 - 0.3 mm)- Wire Station: 20 kg wire station- Control Unit: MITSUBISHI ELECTRIC ADVANCE M700 with 15" Touch Screen- Control Features: 3D CAD/CAM on board, 10 GB user hard drive, ESPERADVANCE dialog system, 3D Parasolid import, 3D graphic check, Hand pilot- Control Interfaces: Ethernet TCP-IP, 2 x USB Port, prepared for mcAnywhere- Generator & Processing Technologies: - PFC (Precise Finish Circuit) high-speed sensing - HSS-AE Anti-Electrolysis Generator - ECONO CUT wire consumption reduction - POWER MASTER process safety system - CORNER MASTER³ radius shaping - ORBIT MASTER circular machining - DIGITAL AE II parallelism optimization - SL-CONTROL for height steps - TS-MASTER for homogeneous surface structures- Equipment: Automatic fine hole search, Easy 3D-Setup, Wire alignment block, Wire chopper, Compressor cooler, E.KO IONISER

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Nedpsywftksfx Af Eelh

Condition: used, functionality: fully functional, mileage: 313,000 km, first registration: 09/2026, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2002, MITSUBISHI CANTER 4x2 - Year 2002 Njdez Hnygjpfx Af Eslh DIESEL FUEL / Euro 3 Mileage: 313,000 km (100,000 km) Manual Transmission / Engine Displacement: 2977 cc / Power: 92 kW GVWR: 35 quintals / License Category: B Payload: 940 kg / Wheelbase: 2500 mm Equipment: TILTING DUMP BODY: 3260 mm x 2140 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,530 h, load capacity: 5,500 kg, lifting height: 4,050 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, fork carriage width: 1,900 mm, fork length: 2,300 mm, empty load weight: 8,030 kg, total length: 3,400 mm, drive type: Diesel, construction width: 1,950 mm, Diesel forklift Load center: 600 Njdpjz Ewdfjfx Af Ejlh Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 8.25-15 Rear tire type: Superelastic Rear tire size: 7.00-12 Description: In addition to this Mitsubishi model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to purchase your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this FD55NT. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons and up. We would also be happy to offer your vehicle for sale on consignment. Side shifter, fork positioner Fork positioner opening range: 550 / 1810 mm Heater, full cab, air conditioning

Condition: excellent (used), Year of construction: 2022, operating hours: 819 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 3,030 mm, total width: 2,687 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, Wire EDM machine MV2400S Year of manufacture: 2022 Available immediately Njdpfx Afj Aaz I De Eelh

Condition: used, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Year of construction: 2004 Generator capacity: 2.100 kVA Availability: in stock Current frequency: 60 Hz Njdpfxoz S Inps Af Ejlh

Condition: used, power: 1,650 kW (2,243.37 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Year of construction: 2008 Generator capacity: 1.650 kVA Availability: in stock Current frequency: 60 Hz Nlsdpfx Afez S Invs Eoh

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, wire diameter (max.): 0.3 mm, overall weight: 5,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details. • Control: Mitsubishi CNC control • Machining type: wire erosion cutting (Wire EDM) • Dielectric system: water-based dielectric system • Cooling/filtration: integrated dielectric filtration system • Automatic wire threading: included • Wire type: brass wire (e.g. OBN 0.25 mm) • Wire diameter capability: approx. 0.1–0.3 mm • Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm) • Application: precision cutting of conductive materials • Typical materials: hardened steel, tool steel, carbide, aluminum • Axis travels: U ±100 mm, V ±100 mm • Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm • Maximum workpiece weight: 3000 kg • Tank weight (empty): 450 kg • Generator weight: 240 kg • Required door opening (W x H): 2587 x 2815 mm • Power supply: 3 phase 400 V AC ±10% 50/60 Hz • Minimum fuse protection: 32 A slow • Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa) Nledsy Egnxopfx Af Eeh • Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire) • Air connection: 3/8" • Machine footprint length: approx. 3299 mm • Minimum clearance around machine: 1 m • Recommended working platform height: minimum 500 mm • Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m Additional equipment • Power supply transformer: 20 kVA • Dimensions: 1.2 x 0.4 x 1.2 m • Weight: 300 kg • Ionizer unit: E.KO ionizer system (included)

Condition: used, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Year of construction: 2004 Empty weight: 24.500 kg Nlsdpfx Aoz Srgijf Ejh Fuel tank: 7500 litres Generator capacity: 2.000 kVA Current frequency: 60 Hz

Condition: excellent (used), functionality: fully functional, mileage: 173,097 km, power: 129 kW (175.39 HP), first registration: 06/2015, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, Year of construction: 2015, Equipment: air conditioning, crane, full service history, Mitsubishi Fuso Canter 6C18/HIAB 055D-2 Crane/4x4 All-Wheel Drive/Air Conditioning • Manufacturer: Mitsubishi • Model: Fuso Canter 6C18 • Mileage: 173,097 km • First Registration: 25.06.2015 • Power: 129 kW/175 hp • Transmission: 5-speed manual transmission • Wheel Configuration: 4x4 All-Wheel Drive • Suspension: Leaf spring/Leaf spring • Differential Lock • Platform Dimensions: 4.50 m x 2.30 m (width) x 2 m (height) • Air Conditioning • Crane: HIAB 055D-2 • 2-stage extension • Lifting Capacity: 4 meters = 1240 kg; 5 meters = 940 kg; 7 meters = 700 kg • Double hydraulic outriggers • Auxiliary hydraulics for grab • Trailer coupling • Euro: 6 • German Vehicle • German Documents • Immediately Ready for Use Nledpfx Afez Eqdfe Esh • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our general terms and conditions.