Used Mitsubishi Fg25N for sale (402)

Condition: good (used), functionality: fully functional, machine/vehicle number: EF17DL 50980, Year of construction: 2005, operating hours: 9,910 h, load capacity: 2,500 kg, Mitsubishi Gas-Powered Forklift with Swing Arm Ihsdpfx Aev Sqd Eed Not Model FG25N Year of Manufacture 2007 Rated Power 42 kW Load Capacity with Attachment: 1000 kg Load Capacity without Attachment: 2500 kg 9,910 Operating Hours Available immediately! Further information upon request!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 867 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,085 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG Forklift Load Centre: 500 mm Fork Width: 100 mm Fork Thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Ihodpfx Asxvt H Tod Nst Mast Type: Triplex Transmission: Torque converter / Automatic Condition: Operational and fully functional Technical Condition: Very good Front Tyre Type: Superelastic Front Tyre Size: 7.00-12 Front Tyre Condition: 80 - 100% Rear Tyre Type: Superelastic Rear Tyre Size: 6.00-9 Rear Tyre Condition: 80 - 100% Description: Maintenance and safety inspection (UVV) renewed on delivery. Drive and hydraulic oil replaced. Machine in excellent condition with original 830 operating hours. Photos show the current condition of the unit. Sideshift, Fork positioner. Additional attachments such as fork positioner or similar are optionally available. 3rd valve, 4th valve, front working lights, load guard, full free lift, CE certificate, beacon. Fully enclosed cabin with heating available at extra cost.

Condition: used, Year of construction: 2024, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,355 mm, mast type: triplex, construction height: 2,415 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 3,890 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center of gravity: 500 Isdpfx Ajukxfdod Njht Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New machine with a manufacturer's warranty of 24 months in accordance with the manufacturer's warranty conditions. Load protection grid, sideshift, -Other attachments such as fork positioner optionally available- 3rd valve, 4th valve, rear work lights, front work lights, load guard, full free lift, CE certificate, safety light, interior mirror, rotating beacon, LED, -Windshield and roof cover / half or full cab incl. heating optionally available at extra cost-

Condition: used, Year of construction: 2023, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,355 mm, mast type: triplex, construction height: 2,415 mm, fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,000 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Ijdpfx Asui Ui Asd Neht Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New machine with a manufacturer's warranty of 24 months in accordance with the manufacturer's warranty conditions. Load protection grid, sideshift, -Other attachments such as fork positioner optionally available- 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windshield, load protection grille, full free lift, CE certificate, safety light, interior mirror, rotating beacon, seat, -windshield and roof cover / half or full cab incl. heating optionally available at extra cost-

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,746 h, load capacity: 2,500 kg, lifting height: 3,680 mm, construction height: 2,300 mm, overall weight: 3,820 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 2,500 kg Lift height: 3,680 mm Overall height: 2,300 mm Fork length: 1,100 mm MACHINE DETAILS Drive type: 4-cylinder LPG engine Front tires: 7.00-12 (70%) Rear tires: 6.00-9 (60%) Weight: 3,820 kg Operating hours: 11,746 h EQUIPMENT 3rd valve Isdpfx Aex E Tdysd Neht Front work lights Side shift

Condition: used, Year of construction: 2023, operating hours: 2 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 100 mm, mast type: simplex, construction height: 2,145 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,210 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: torque converter / automatic Technical condition: New Front tires Type: Superelastic Ihsdpencrplefx Ad Net Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New device with a manufacturer's warranty of 24 months, but a maximum of 2,000 operating hours. The first entry applies. Immediately available. Sideshift, Fork positioner, rotator or similar optionally available at extra cost. 3rd valve, rear working lights, front working lights, load guard, full free lift, CE certificate,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,068 h, load capacity: 4,000 kg, lifting height: 3,240 mm, construction height: 2,300 mm, overall weight: 5,080 kg, Equipment: sideshift, TECHNICAL DETAILS Ihodpfox E Tgzjx Ad Not Load capacity: 4,000 kg Lift height: 3,240 mm Overall height: 2,300 mm Fork length: 2,400 mm MACHINE DETAILS Drive type: 6-cylinder LPG engine Front tires: 8.25-15 (70%) Rear tires: 7.00-12 (60%) Weight: 5,080 kg Operating hours: 7,068 h EQUIPMENT 3rd hydraulic valve Rear work lights Side shifter

Condition: used, machine/vehicle number: EF14E-00xxxx, Year of construction: 2004, operating hours: 3,884 h, fuel type: diesel, Please contact ATS Norway for more information Ihodpfxoyagflo Ad Net Please provide reference number upon request: 22159 Specifications: 2004 model 3884 hours (will increase slightly) 42.3 kW Weight: 5050 kg Lifting height: 5450 mm Lifting capacity: 2750 kg Worn tires (see pictures) Recently serviced by owner Side shift Climate control Lights Radio Ready for delivery Description: We have a 2004 Mitsubishi FD30N forklift with side shift for sale. The truck functions as it should according to the owner. The hinges on one door are broken, but the door is included with the sale. Recently serviced. Ready for delivery. Hours: 3884 Own weight: 5050 Lifting heigth: 5450 Lifting capacity: 2750 Kw: 42,3 Model: FD30N

Condition: used, capacity in kVA 53,5 kVA Ihsdpowth Ucofx Ad Net input voltage 480 V output voltage / V length 800 mm width 600 mm height 530 mm weight 260 kg MITSUBISHI Dry type transformer 3PH 53.5 kVA TR-YU Condition: used functional

Year of construction: 2016, condition: as good as new (ex-display), Face milling cutter Ihsdefmxh Topfx Ad Njt Make Mitsubishi Type AHX 640 W-315 CA28 R Diameter 315 mm Weight 31 kg

Year of construction: 2019, condition: as good as new (ex-display), multifunctional end face mill Ihjdpfxefcrwcj Ad Nst Make Mitsubishi Type SPX4RO 5034 BT 50 NM diameter 50 mm 157 mm max. cutting depth 339 mm Total length 190 mm roll length = maximum immersion depth tipped with carbide plates VP 15 TF

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter - Face milling cutter Make Mitsubishi Type AHX 640 W 160 C 22 R Multicorner Iodefc Tq Eepfx Ad Njht Face milling cutter for high feed rates for 22 heptagonal inserts Cutter diameter 160 mm

Year of construction: 2016, condition: as good as new (ex-display), Face milling cutter Cutter head Make Mitsubishi Type AHX 640 W-315 CA28 R Ijdpfx Ajfmch Ied Nsht Diameter 315 mm Weight 31kg

Condition: excellent (used), Shell end millsHinge cuttersHinge cuttersMake MitsubishiType SPX4R05034BT50NMLength 340 mm Ihjdpfx Aod Hfi Ujd Net

Condition: excellent (used), Turning tools with rotating cutting plate Type: RRSDR 3232P12 Ijdpfx Aed Hflaed Nsht Make Mitsubishi Length 165 mm

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 Iodpfx Adox Enknj Noht • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, number of axes: 5, This 5-axis Mitsubishi MV2400 S wire EDM machine was manufactured in 2016. It features a 600 mm X-axis travel, 400 mm Y-axis travel, and 310 mm Z-axis travel. Capable of handling workpieces up to 1500 kg, it offers dimensions up to 1050 mm in length and 820 mm in width. Consider the opportunity to buy this Mitsubishi MV2400 S wire EDM machine. Contact us for more information. Iodpfx Adex Urafj Neht • Maximum workpiece length: 1050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1500 kg

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, overall weight: 3,725 kg, product length (max.): 2,145 mm, This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine. • Maximum Workpiece Dimensions: 850 x 640 x 250 mm • Maximum Workpiece Weight: 700 kg • Maximum Electrode Weight: 50 kg • Table Dimensions (LxW): 700 x 500 mm • Table Surface: Stainless steel • C-axis with Erowa Chuck: 152.5 – 452.5 mm • Maximum Dielectric Filling Level Stroke: 300 ml • Filtration System: Yes • Tank Capacity: 400 L • Filter Particle Fineness: 3 / 2 µm • Dielectric Temperature Control: Yes • Pulse Generator Power Supply with Transistor Control • Cooling Method: Fully Sealed, Indirect Air Cooling Dimensions Machine Depth 2050 mm Ihodpfox Uq Syjx Ad Nst

Condition: ready for operation (used), Year of construction: 2013, load capacity: 13 kg, controller manufacturer: MITSUBISHI, number of axes: 6, This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. It's equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information. Axis Operating Range: Ijdpfx Adox D H Nko Nsht • J1 (Base Rotation): ±240° (Total 480°) • J2 (Shoulder): -150° to +90° (Total 240°) • J3 (Elbow): -72.5° to +95° (Total 167.5°) • J4 (Wrist Yaw): ±200° (Total 400°) • J5 (Wrist Pitch): ±120° (Total 240°) • J6 (Wrist Roll): ±360° (Total 720°)Axis Power: • J1 (Base): 1500 W • J2 (Shoulder): 1500 W • J3 (Elbow): 750 W • J4 (Wrist Yaw): 400 W • J5 (Wrist Pitch): 200 W • J6 (Wrist Roll): 100 W

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t Ihjdpfx Adox Hp Nho Njt dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" *

Condition: used, functionality: fully functional, machine/vehicle number: SFB310, Year of construction: 2022, operating hours: 1,420 h, load capacity: 5,000 kg, lifting height: 5,550 mm, free lift: 1,793 mm, fuel type: electric, mast type: triplex, construction height: 2,670 mm, fork length: 1,200 mm, empty load weight: 7,991 kg, total length: 4,025 mm, drive type: Elektro, construction width: 1,450 mm, Electric 4-wheel forklift truck Chassis number: SFB310 Load center: 500 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: very good Front tires type: Superelastik Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: Frabat Battery year of construction: 2022 Battery condition: 80 - 100% Description: Find the right used forklift truck for you now! STA-TECH offers you a large selection of used equipment. Regardless of whether you need a pallet truck, electric, diesel or LPG forklift - with our extensive range of inexpensive, ready-to-run used forklifts to new forklifts, we offer you a suitable solution! Here you can find more used forklifts from our stock: sta-tech/used-forklifts STA-TECH is your partner for: ● Purchase and rental of new and used forklift trucks and warehouse technology ● Purchase of used equipment and uncomplicated logistics ● Comprehensive, manufacturer-independent service - from repair and maintenance to testing 3rd valve, 4th valve, rear work lights, front work lights, full cab, air conditioning, scales, Ijdpfelrq H Rox Ad Nsht

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,200 h, load capacity: 2,500 kg, lifting height: 135 mm, fuel type: electric, construction height: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Low-level order picker Ihedpfx Adowdz Dls Net Load center of gravity: 600 Technical condition: good Battery voltage: 24V Battery Ah: 500Ah Battery type: PzS Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel, or LPG forklifts – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: • Purchase and rental of forklifts and warehouse equipment • Purchase of used equipment and logistics • Cross-manufacturer service: repairs, maintenance, inspections Load protection grids,

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Mitsubishi, Frequency converter inverter -Type: FR-A024-SO.4K-EC -Power: 0.4 kW -Input: 220-240 V 50/60 Hz -Output: 2.5A MAX 3PH AC200-240V 0.2-400Hz -Quantity: 1x Inverter available -Dimensions: 140/140/H150 mm Ihjdpsxx Rtisfx Ad Njt -Weight: 2 kg

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Mitsubishi, frequency converter type FR-S520SE-0. 4K-EC -Power: 0.4 kW Iodpfxsvrchps Ad Njht -Input: 200- 240 V 50/60 Hz -Output: 3PH AC200-240V 0.5-120Hz -Dimensions: 170/75/H180 mm -Weight: 1.3 kg

Year of construction: 1988, condition: used, Refrigeration Compressor, Refrigeration Machine, Refrigeration Compressor, Refrigeration Unit, Refrigeration Compressor, Compressor, Motor Compressor, Separation Hood Compressor, Separation Hood Compressor, Refrigeration Unit, Hermetic Compressor Ihedeqpl Snopfx Ad Nst -Manufacturer: Mitsubishi, compressor Hermetic Compressor type NH465YJE -Power kW -Voltage: 380-415/400-460V/50/60Hz -Technical data: see photo of nameplate -Dimensions: 310/200/H410 mm -Weight: 27 kg