Used Krones Labelling Machine for sale (119)

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Bedpfoytvyfex Abwjda

Condition: used, Year of construction: 1998, Overview This Krones - Linapac F-T-1800 automatic bottle packer was manufactured in 1998 and was previously installed in a returnable glass bottling line. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filler and inspection systems. The LINAPAC packer series is widely used in high-capacity beverage production lines due to its robust design and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-performance production environment and is suitable for integration into returnable glass bottling systems with similar capacity ranges. Technical Data Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic insertion of filled bottles into beverage crates Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request Bedpjytq Taofx Abwsda

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: Screw capper – 11 heads Crown cork capper – 11 heads Closure handling: Integrated closure sorting systems on the machine Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request Bdodpeytqzwofx Abwja

Condition: used, Year of construction: 1998, Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 1998 Designed line capacity: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle Formats 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Compliance: CE conformity available Availability: On request Bdjdpfeytpc Hox Abwoa

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Capacity: Not provided Formats: 0.75 L Gourmet bottle 0.25 L Gourmet bottle 0.25 L Vichy bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems: Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth / finish inspection Sidewall inspection with LED illumination Detection of transparent films on bottle base and sidewall Scuffing detection via sidewall camera Residual liquid detection via infrared system and high-frequency detection Reject systems: Foreign container rejection at infeed Contaminated bottle rejection at discharge Separate rejection for bottles with damaged finish or thread Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit Transport height: approx. 1,050 mm Direction of operation: Left machine Bedpfjythznox Abwjda

Condition: used, Year of construction: 1991, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used Krones Bonamatic labeling equipment, year of manufacture 1991. Wet-glue labeling machine with 2 stations (front, back, and neck labels), maximum capacity approximately 12,000 bottles/hour, 12 bottle tables, central control, suitable for both centered and non-centered bottles. - Excluding external bottle conveyor drive, including 2 glue pumps and glue storage buckets, including 9 different format part sets. - Includes spare/wear parts consisting of: 11 label magazines, various pressure rollers and brushes, 12 glue pallets, 11 gripper assemblies, assorted documentation, infeed and outfeed stars, spacers, 4 sets of tables, 4 feed worms. Year of manufacture: 1991 Factory number: 090-857 Voltage: 380 V Current type: 3~ Frequency: 50 Hz Bdedjyw Izqjpfx Abwja Current nominal: 18 A Wiring diagram number: 2-090-E0-857-0 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Bjdpfx Abow D E Ubjwjda Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Bodpjx H Tgdsfx Abwoda Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Year of construction: 2000, operating hours: 80,000 h, condition: used, machine/vehicle number: PX17, Used premix Krones 2000 up to 45.000 lhTechnical Specifications & Performance DataThis Krones premix mixer is a robust processing unit designed for beverage production lines requiring reliable, high-throughput syrup and water mixing. Manufactured in 2000, it offers industrial performance and quality consistent with Krones engineering. The system is suitable for integration upstream of filling and carbonation stages within used bottling line environments and broader industrial packaging applications.Manufacturer: KronesYear: 2000Production capacity: up to 45,000 L/hElectrical rating: 230/400 V, 3~Frequency: 50 HzRated current: 87 AAllowable operating overpressure: up to 3.5 bar (vessel rating)Certification: CE marking; manufactured under ISO 9001 quality managementAdvanced Automation & Control SystemsThe premix system is configured for stable, repeatable mixing performance with industrial-grade electrical components. The three-phase power configuration at 230/400 V and 50 Hz supports dependable operation across beverage processing shifts. Safety and compliance are supported by CE marking and ISO 9001 manufacturing standards. The unit’s control architecture is suitable for integration with line-level PLC/HMI systems commonly used in beverage production.Three-phase 3~ electrical systemRated current 87 A for robust process dutyCE-compliant safety and quality designEngineered for consistent ratio control and process stabilityProduction Line Integration CapabilitiesEngineered for inline use, this premix mixer integrates seamlessly with upstream syrup room equipment and downstream carbonators, fillers, and packaging machinery. It supports second hand and retrofit projects, enhancing capacity and process stability in existing beverage production layouts. The system fits PET or glass bottle lines as part of a complete packaging chain, from processing to filling, labeling, and capping.Inline or standalone operation within beverage processingIdeal interface to carbonators and filling machinesSupports industrial packaging workflows in used bottling line upgradesFlexible adaptation for PET and glass bottling linesMachine Condition & Maintenance HistoryThe machine is installed under power and available for quick sale. It is not currently in active production and will require dismantling for removal and relocation. Operating hours are approximately 80,000, consistent with a well-maintained industrial processing unit of this class.Under power, not currently in productionApprox. 80,000 operating hoursAvailable for prompt sale and dismantlingOperational Performance & VersatilityDesigned for beverage production, the Krones premix mixer provides accurate blending of water and syrup for a wide spectrum of products. Its vessel overpressure rating up to 3.5 bar supports stable operation in line environments that may feed carbonation steps and high-speed filling. This makes ... Bdjdpsycvuujfx Abwea

Year of construction: 2017, condition: used, Empty bottle inspector for monitoring empty glass bottles. The machine uses cameras, high frequency, and infrared to inspect the following criteria: - Contour, height, color - Side wall - Residual lye detection - Mouth - Thread - Residual liquid detection - Bottom inspection - Glass shards and film detection - Sealing surface inspection Bottles that do not meet the specifications are ejected via pushers. Additional title: Straight-running machine in modular design Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Water: 3-5 bar Compressed air: 6-10 bar, 1/2" connection Length: 2980 mm Formats: 1,0 l; 0,5 l; 0,2 l Running direction: right -> left Bdedpeyr Ifksfx Abwoa Operation / Control: Simatic S7-300 Position: standing on feet Base construction: straight-running Features: camera, side wall modules, test bottle detection, high-frequency and infrared inspection, side opening inspection, thread inspection, sealing surface inspection, light barrier, pushers at inlet and outlet, diversion control, operating panel

Condition: used, Year of construction: 2002, machine/vehicle number: M316, Used KRONES filling triblock for sparkling water 25000 BPH - year 2002Technical Specifications & Performance DataThis electronic filling monoblock integrates rinsing, isobaric filling, and capping in a compact rotary platform engineered by Krones. Optimized for PET bottles and carbonated water applications, it delivers high output with excellent process stability and hygiene. The configuration includes an 80-valve filler, 60-gripper rinser and a 15-head Zalkin capper, using neck-handling transfer for precise container control.Production speed: up to 25,000 bphCurrent bottle format: 0.5LContainer material: PETNeck handling: Yes (neck transfer)Neck finish type: AlaskaFiller valves: 80Capper heads: 15 (Zalkin)CO2 management: Yes (isobaric filling for carbonated products)Machine type: RotaryRotation direction: CounterclockwiseMachine pitch: 111 mmMax container height: 320 mmWorking height: 1200 mmManufacturer: KronesAdvanced Automation & Control SystemsThe monoblock features Krones HMI interfaces for streamlined operation and diagnostics. Dedicated panels identified as KFS-3 and KRS-1 provide clear process monitoring, real-time production counters, and guided functions such as production counter reset, error list management, and lamp tests. Operator interaction is simplified via an intuitive keypad with contextual help and status indicators across machine modules.Integrated Krones control panels with HMIReal-time production counters and status visualizationProgrammable function keys for fast operationEmergency-stop circuitry and safeguarded control stationsProduction Line Integration CapabilitiesDesigned for industrial packaging environments, this used bottling line component can operate as part of a complete beverage production layout or as a stand-alone monoblock. Neck-handling transfer ensures stable throughput across light-weight PET formats, while rotary architecture supports quick changeovers between compatible sizes.Inline integration with upstream/downstream conveyorsSuitable for PET bottle handling with neck transferFormat flexibility around 0.5L, with potential for adjacent sizes depending on toolingIdeal for water and carbonated water within beverage productionMachine Condition & Maintenance HistoryThe monoblock was disconnected from regular production approximately three months ago with no issues reported. It is in excellent working order and available for immediate shipment.Operational status: ready for operationTime since last production: ~3 monthsCondition: excellent; fully functional at time of disconnectionOperational Performance & VersatilityEngineered for carbonated water, the isobaric filler with CO2 management ensures accurate fill levels a... Bodpfx Absyr Hvujweda

Condition: used, Year of construction: 2009, machine/vehicle number: LC606, Used Krones bottling line for beer in glass 60.000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for high-speed beer production in glass containers and is suitable for second hand industrial packaging applications. The line integrates washing, inspection, filling, capping, pasteurization, case packing, palletizing, and conveyor handling for efficient beverage production.Production speed: 60,000 bottles per hourContainer type: Amber glass beer bottlesBottle format: 0.45 L (nominal); brimful 0.464 L ± 4 mlFilling height: 45 mm from the top edgeMain filler/capper: Krones MECAFILLEmpty bottle inspection: Toptronic 19 (EBI)Pre-/post-fill inspection: Krones Checkmat; full bottle inspection and level/cap controlBottle washer: Krones LavatecTunnel pasteurizer: SHIELDCase packer: SmartPac Einpacker for crate insertionPalletizer: Krones Pressant SoperConveyor system: Krones Synco SElectrical supply: 400/230 V, 50 HzRepresentative loads (components): up to 182 A (control unit), 41 A (pasteurizer), 23 A (palletizer), 8 A (wet-end inspection equipment)Year of construction (key components): 2009Advanced Automation & Control SystemsThe line combines synchronized conveyor controls with integrated inspection systems to maintain consistent product quality at high throughput. Centralized operator interfaces provide clear status feedback for the filler/capper, inspection modules, pasteurizer, and end-of-line equipment. Electrical architecture follows standard industrial beverage production practices for reliability and maintainability.Main power: 400/230 V, 50 HzIntegrated inspection: Empty bottle inspector, pre-fill and post-fill Checkmat controlsAutomated bottle handling and crate insertion to sustain continuous operationDesigned for rapid fault detection and line recovery through modular stationsProduction Line Integration CapabilitiesConfigured as an inline system, this used bottling line is designed for seamless transfer between wet end processing, filling and capping, thermal treatment, and dry end packaging. The Krones Synco S conveyor network ensures stable bottle flow and accumulation management.Inline operation with coordinated starwheels and conveyorsGlass bottle handling optimized for beer applicationsDownstream compatibility with crate packing and palletizingFocused on 0.45 L glass format for high-speed runsMachine Condition & Maintenance HistoryThe line is presented as a second hand solution in ready-for-operation condition. Key components are from 2009, reflecting modern engineering suitable for high-speed beer bottling. Operational details, service records, and maintenance logs can be aligned with on-site inspections and testing duri... Bodoyr Huqepfx Abweda

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. Bdedeyxv Ihepfx Abwoa This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Filler: 32 valves (gravity system) Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production.

Condition: used, Year of construction: 2006, Overview  This blowing machine was manufactured in 2006 by German manufacturer KRONES. The machine was part of a complete non‑returnable PET bottle filling line dedicated to fresh milk production. It was used to produce 1.0 L PET bottles and operated at a nominal speed of 9,000 bottles per hour. The machine is described as being in good condition. The equipment becomes available as the seller decided to outsource milk production and continue only cheese production at the site. Technical data  Capacity: 9,000 bottles/hour Formats: 1.0 L Application: Fresh milk Container material: PET Neck finish: 38 mm Bjdpjym D U Rjfx Abwoda

Condition: used, Year of construction: 2006, Overview  This complete filling line for non-returnable PET bottles was manufactured 2006 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line and dedicated to produce fresh milk. The line is designed for milk production, handling up to 9,000 b/h and is in a good condition. The equipment becomes available as the seller dediced to commit the milk production to an external company and continue only the cheese production in the factory. Technical Information Product: Fresh Milk Container Material: PET Bottle Format: 1,0 L Nominal Speed: 9.000 BPH Neck Finish: 38 mm Label Type: OPP Rollfed Packaging: 16 bottles per crate Pallet Type: Europallet 800 x 1200 Scope of Delivery  Blowing Machine | Krones | Contiform S8 | 2006 Preform Tipper | TM | KPT | 2012 Air Conveyors (~100 m, 9 fans) | Krones | AirCo | 2009 Filling Monoblock (Neck Handling, 32 valves) | Krones | Volumetic | 2006 Capper (8 heads) | Krones | 2006 Ink Bottles Marker | VideoJet | 2006 Labelling Machine | Krones | Contiroll | 2004 Case Packer | CMT | IFL3T | 2004 Palletizer (Fanuc M-410 Robot) | Elettric 80 | 2009 LGV Pallet Transport Shuttle (Optional) | Elettric 80 | 2009 Bodpfxsym D Uko Abwoda

Condition: used, Year of construction: 2004, AVAILABILITY: NOW W 117| KRONES PET BLOW MOLDER Model: Contiform S18 Year: 2004 Output: 24,000 bph for 2.0 L – 28,000 bph for 1.5 L Rotary 18 cavities 1 set of molds included Automatic chiller Bodpfeywy S Uox Abwjda Automatic preform feeder Automatic preform crate tipper Bottle ejector installed in the pneumatic conveyor Electrical control panel in Polish, English, and German Safety guarding

Condition: used, Year of construction: 2000, operating hours: 34,364 h, functionality: limited functionality, machine/vehicle number: 960-08, total width: 2,550 mm, total length: 3,600 mm, total height: 2,300 mm, type of input current: three-phase, outer diameter of label roll: 400 mm, inside diameter of label roll: 80 mm, overall weight: 4,000 kg, input voltage: 400 V, year of last overhaul: 2025, operating temperature: 25 °C, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, Krones Variomatic Machine for Sale A Krones AG Variomatic machine is offered for sale, designed for industrial use in bottling and winery environments. Manufacturer: Krones AG Year of manufacture: 2000 Serial number: 733-048 Quality management / origin: ISO 9001 Technical specifications: Supply voltage: 400 V Power type: 3-phase (3~) Frequency: 50 Hz Rated current: 20 A Capacity: approx. 6,000 bottles/hour Features: Bodpfxjyb Db Hj Abweda Krones Variomatic control / drive system Robust industrial design Reliable operation and long service life Can be integrated into bottling lines Applications: Wineries Beverage bottling plants Small to medium-capacity filling and bottling lines The machine comes from an industrial operating environment. Viewing is possible by prior arrangement. 📍 For further information, please feel free to contact us.

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data manufacturer: Krones model: Volumetic (filler) / Variojet (rinser) year of manufacture: 2001 filling valves: 120 rinsing stations: 88 rinsing channels: 2 (currently ClO₂ and fresh water) formats: 1.0 L GDB PET-MW 0.5 L GDB PET-MW POC 1810 closures production capacity: 32,000 bph at 1.0 L direction of rotation: clockwise availability: beginning of October 2026 Bdodpfsyluwtox Abwoa

Condition: used, Year of construction: 2004, Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  Capacity: Max. 13,600 bph Formats: 0.50 L 1.00 L 1.50 L Neck finish: PCO 1881 Alaska Number of cavities: 8 moulds Operating hours: Approx. 35,000 h Scope of Delivery  KRONES CONTIFORM S8 stretch blow moulding machine Preform hopper and feeder Chiller 6 sets of moulds Spare parts Bdodpfoylacuex Abwja

Condition: used, Rotary labelling machine for labelling bottles using two cold glue stations. Manufacturer: KRONES Model: PRONTOMATIC Year of manufacture: 1991 Capacity: 10,000 bph Bedjywckgjpfx Abwoda Carousel: 12 stations Configuration: 2 x heads for cold glue labels Original electrical documentation. Technical condition: used machine, condition as shown in the photos.

Condition: used, Year of construction: 1991, Nominal capacity of filler: 60000 b/h Power: 10,7 kW Water: max. 4 bar, consumption: 1,3 l/min Bedpfjvcqyhjx Abwsda Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h Length: approx. 2.995 mm Width: approx. 2.370 mm Height: approx. 2.600 mm Weight: 5200 kg Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm Machine partitioning: 94 mm Operation / Control: Siemens S5 Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Condition: used, Year of construction: 1995, Capacity: 20000 l/h CO2 connection pressure: 10 bar Current: 69 A Voltage: 230/400 V Frequency: 50 Hz Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar Water: Connection pressure: min. 4, max. 5 bar Compressed air: min. 7, max. 10 bar Bodjvcqwgspfx Abweda Length: 2 m Width: 2,4 m Height: 2,5 m Weight: 4000 kg Operation / Control: Siemens Simatic S5 Features: Saturation Tank (d = 750 mm) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Bsdpfx Abjvu Tt Ijwsda Running direction: anticlockwise Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 2010, Overview  This bottle washer was manufactured in 2010 by German company KRONES AG. The LAVATEC 358 was operated on 330 ml bottles, achieving a maximum speed of 66,000 bph with a nominal speed of 43,000 bph. The machine is stopped since September 2025, still installed with energy disconnected, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: Max. 66,000 bph Nominal 43,000 bph Formats: 330 ml Application: Bottle washing Operating hours: 48,121 h Bdodpfjyi Aywox Abwoa

Condition: used, Year of construction: 2012, Overview  This isobarometric bottle filler was manufactured in 2012 by German company KRONES. The MODULFILL ISO is equipped with 144 filling valves and 24 closing heads (pitch 95 mm). The machine was operated on 330 ml bottles at 43,200 bph and is designed for up to 50,000 bph on this format. The filler is still installed with energy disconnected, stopped since September 2025, and can be visited on request. The machine has 48,121 operating hours. Regular maintenance was performed (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: 43,200 bph on 330 ml (designed up to 50,000 bph) Formats: 330 ml Filling type: Isobarometric Neck finish: Crown / Twist-off Configuration: 144 filling valves 24 closing heads Pitch: 95 mm Operating hours: 48,121 h Dimensions: approx. 12 m × 8 m Bjdpfjyigh Ajx Abweda