Used Sidel filling line for water, PET 36000 BPH

Krones

Condition: used, Year of construction: 2024, Overview Used spare parts for KRONES Contiform S PET stretch blow moulders (S8 to S24), sold individually from stock - no need to buy the complete inventory. The part descriptions name the executions S Gen. 2-3.1, S Gen. 4a, S Enviro and Enviro 2. Age and condition - Mould carriers and heating chain: 2 years old - Cams: older, without damage - Electrical parts: partly from 2005, others newer. The older ones are no longer made in this form; the alternative is a retrofit at extra cost. - All parts used, sold as-is without guarantee, subject to applicable law and the agreed sales terms Available parts (part number, description, quantity) Heating and preform handling - actuation unit T50 NRS (32) - heating chain link HZM T50 (250) - 1786323181 heating mandrel, 44 mm stroke (250) - three-phase motor 120/150 W (20) - 1786323430 reflector, complete (60) - 2800200575 energy-optimised heating box (20) Cams and locking - 1786470930 guide cam, downward (1) - 1786470940 guide cam, upward (1) - 1786470640 cam segment (1) - 1786470660 cam segment (1) - 1786470650 cam segment (1) - 1786470700 cam segment (1) - 1786470710 connecting plate (1) - 1786471180 linkage lever (1) - bearing bracket LBN-20/25 (1) - double-acting cylinder 25 mm, stroke 20 mm (1) - rod-end joint (1) Dcodpfxs Ahxz Ho Apisp - locking cam type 787 (1) - unlocking cam type 787 (1) - main cam (quantity on request) Drive and blowing modules - synchronous geared motor 11 kW (1) - 2786107120 pinion shaft, 18/24 stations (1) - 2800207818 intermediate shaft, 24 stations (1) - sealing head (1) - 2800200738 stretch module housing (10) - 9120641682 blow piston block, Enviro 2 (24) - blow slide, S Enviro (20) - 2800200762 stretch slide, S Gen. 2-3.1 (20) Mould carriers S Gen. 4a - mould carrier, complete (23) - 2800200765 base mould holder (23) - 2800200774 actuation assembly (23) Bottle transfer - 9121792003 swivel arm, infeed star (24) - 2800200556 bottle rejection assembly, 16-24 stations (2) Media and electrical - flow meter type 335 (3) - 1786411200 hose assembly, base mould (20) - 1786411210 hose assembly, mould half A (20) - 1786411220 hose assembly, mould half B (20) - power controller (20) - safety switch 250 V / 2 A (8) - Danfoss VLT 500 frequency inverter (6) Compatibility Check the fit on your machine before purchase: send the KRONES machine model with its type plate data, the part number and, if available, the assembly or drawing number. KRONES and Contiform are trademarks of their respective owner; this is an independent offer of used spare parts. Availability Available immediately from stock; quantities subject to confirmation, photos of individual parts on request.

Condition: used, Year of construction: 2006, PET bottling line, 25,000 bph, for sale with the following line components: - PET blow moulder, manufacturer: Krones, type: Contiform, year: 2006 - Rinser-filler-capper block, manufacturer: Krones 60/80/15, year: 2001 Dcodeyzft Sspfx Apisp - Labelling machine, manufacturer: Krones, type: Contiroll, year: 2001 - Shrink tunnel/shrink packer, manufacturer: Krones - Traypacker, manufacturer: Dimac - Palletizer, manufacturer: Kettner, type: Pressant The line has been dismantled and is in storage.

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones - Model: Variojet - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass Dcodpez Hai Tofx Apisp - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: used, Year of construction: 2012, operating hours: 759 h, machine/vehicle number: LC644, Used Krones CSD filling line for Glass 36000 BPHTechnical Specifications & Performance DataThis line is build in 2012, Krones complete line for glass CSD, rated 36,000 bottles/hour in 1.0 L format, with a 70‑valve isobaric filler and 18 capping heads. ready for operation, and shows 759 working hours.Manufacturer: KronesYear of manufacture: 2012Nominal capacity: 36,000 bphProduct type: CSD (carbonated soft drinks)Container type: Glass bottlesBottle neck finish: 28 mmVolume format: 1.0 LRinsing heads/nozzles: 90Filling valves: 70 (isobaric filler for CSD)Capping heads: 18Working hours: 759Electrical ratings: 400/230 V, 50 Hz; up to 46 A on major modulesLine components: Krones Linatronic empty-bottle inspector; rotary rinsing machine (90 nozzles); isobaric filling machine (70 valves, 18 capping heads); Krones Checkmat filled-container inspector; Krones Autocol labeling machine; Krones Variopac wrap-around packer; Krones Modulpal palletizer; integrated conveyor systemDocumentation: Operating manuals availableLayout: Line layout availableAdvanced Automation & Control SystemsKrones automation with centralized HMI enables recipe-based changeovers and synchronized drives for high-speed CSD operation.Operator HMI for setup and monitoringAutomatic synchronization across rinsing, filling, labeling, packing, palletizingElectronic fill control optimized for isobaric CSD fillingInterlocked safety guards and distributed emergency stopThree-phase 400 V supply with 230 V control circuits, 50 HzProduction Line Integration CapabilitiesEngineered as a cohesive Krones platform and bottling station, maintaining precise glass handling from infeed through palletizing.Inline operation with full conveyor integration from empty bottle inspection to finished palletsFormat range centered on 1.0 L, 28 mm neck glassIsobaric technology dedicated to carbonated soft drinksLabeling via Krones Autocol for accurate application on glassWrap-around case packing (Variopac) and palletizing (Modulpal)Machine Condition & Maintenance HistoryOn power and ready for operation with low hours. Documentation and layout support fast installation and service planning.Operational status: ready for operationLow-hours profile: 759 hoursManuals and layout includedOperational Performance & VersatilityConfigured for glass CSD, providing stable carbonation retention and foam control at 36,000 bph. As a CSD bottling machine, quality control is ensured by dual inspection: Linat... Dodpezd Uftefx Apiscp

Condition: used, Year of construction: 2004, machine/vehicle number: M323, Used combi KRONES contiform S8 + mecafill triblockTechnical Specifications & Performance DataThis rotary blow-fill-cap monoblock is engineered for high-quality PET bottle handling and beverage production. Manufactured by Krones, it integrates a Contiform S8 stretch blow molding section with a Mecafill filling block and a Krones capping unit, delivering efficient performance for still and sparkling water. Designed for industrial packaging environments and suitable for integration into a used bottling line or as a second hand standalone system, it combines precision, reliability, and reduced footprint.Manufacturer: KronesModel configuration: Contiform S8 + Mecafill (integrated tri-bloc)Year of manufacture: 2004Maximum speed: up to 12,800 bottles per hourContainer material: PETCurrent bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum bottle height: 350 mmRotation/direction of work: ClockwiseNeck type: AlaskaBlow molder molds: 8 cavitiesGrippers (in/out): 8Mandrels: 220Blowing pressure: 40 barElectrical supply: 400 V, 3 PH, 50 HzControl systems: Siemens PLC with Krones HMIAdvanced Automation & Control SystemsThe monoblock features an integrated automation suite designed to simplify operation and reduce changeover times. The Siemens PLC platform coordinates the stretch blow molding, filling, and capping phases, while the Krones HMI provides intuitive process visualization, recipe selection for multiple bottle formats, and operator diagnostics. Rotary motion ensures smooth container transfer between stations, minimizing scuffs and misalignment. Electronic setpoints for speed and temperature profiles improve consistency across shifts and batches. Safety interlocks and guarded access points support reliable operation during beverage production.Production Line Integration CapabilitiesEngineered for seamless integration, this monoblock can operate inline with upstream preform feeding and downstream conveyors, labelers, inspectors, and secondary packaging machinery. It fits modern beverage production and industrial packaging layouts, supporting flexible format changes across 0.5L, 1.0L, and 1.5L PET bottles. The integrated design reduces footprint and transfer points compared to separate machines, enhancing efficiency in both new installations and upgrades of a used bottling line.Machine Condition & Maintenance HistoryThe machine is refurbished and guaranteed, ready for operation with compatible spare parts available. It is supplied in excellent working condition, tested, and prepared for immediate deployment. A 6-month warranty underscores its reliability and provides added assurance for second hand equipment buyers.Operational Performance & VersatilityThis tri-bloc configuration is optimized for water bottling, including both still and sparkling products. The blow molding section with 8 molds delivers stable out... Dedpfx Apeyz R H Djiocp

Condition: good (used), functionality: fully functional, Krones steam shrinking line, capable of processing up to 12,000 bottles per hour. Dcsdpfx Aj Ah Thnspiop

Condition: used, Year of construction: 2004, Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Technical data - Manufacturer: Krones - Model: Lavatec KES - Year of manufacture: 2004 - Output: 11,000 bottles/h - Containers: glass bottles - Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Condition Dcjdpfx Apo Agpqwoijp Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2026, Overview This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX). The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.  Technical data - Capacity: up to 48,000 bph (500 ml PET) - Formats: 500 ml PET bottles - Application: Blowing, filling and capping of PET bottles - Configuration: - Rotary stretch blow moulding machine SBF412 (2-cavity configuration) - Electronic-volumetric filler with 120 valves - Fully electronic capper (FEC) with 20 heads - Neck finish: 26/22 GME 30.40 - Cap type: Plastic screw flat / press-on caps - Filling technology: Electronic-volumetric - Products: Carbonated water, still water, carbonated soft drinks - CO₂ content: up to 8.5 g/l - Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks) Scope of Delivery - Blowmoulder | Acmi | SBF412 | Rotary stretch blow moulding machine (2-cavity) - 100% r-PET and lightweight preform compatible Djdpfeyzc Hpex Apijcp - Filler | Acmi | ESF | Electronic-volumetric filler with 120 valves - Capper | Acmi | FEC | 20-head capper for screw and press-on caps - Cap Feeder | Operator level waterfall orientation and feeding - Preform orienter |Operator level preform feeding - Preform insertion control | Control system - Blowing air recovery system | For pre-blow and line - Cooling system | Water recirculation on combo interface - Automation package | PLC teleservice, Ethernet, UPS, remote access - Lubrication system | Automatic centralized lubrication - Foaming unit | Automatic system

Condition: used, Year of construction: 2015, Overview Complete glass bottle line for still soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot or cold filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. The filler runs hot fill and can also fill cold, which widens the range of products the line can handle. There is no carbonator, so the line fills still (non-carbonated) products only. Technical data - Products: still soft drinks, juices - Filling: hot fill or cold fill, no carbonation - Containers: non-returnable glass bottles 0.25 l - 1 l - Line output: 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l - Years of manufacture: 1987 - 2016 Scope of Delivery Type | Manufacturer | Model | Description | Year Dedpfxe Agpk As Apiecp - Glass depalletizer | Legendre | 16,000 bottles/h | 1999 - Rinser | Krones | VARIOJET | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Filler | Krones | MODULFILL | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Twist-off capping machine | White Cap | closure diameters 38 - 53 mm, arranged behind the filler - Bottle inverter | Polyketting | 12,000 bottles/h | 2004 - Hot-fill pasteurizer | APV | 15,000 l/h | 2005 - Bottle cooler | SEN | 1987 - Full bottle inspector | Heuft | SPECTRUM TX | 22,000 bottles/h - Labeller | Krones | PRONTOMATIC | 15,000 bottles/h | 2006 - Labeller | Langguth | 13,200 bottles/h | 2004 - Sleever | Sleeve Technology | 16,000 bottles/h | 2016 - Buffer table | Krones | 2006 - Tray packer | SMI | 16,000 bottles/h | 1996 - Incrater | Stork | 16,000 bottles/h | 1996 - Carton erector | Kettner | KAF | 12,000 bottles/h | 1999 - Carton closer | Kettner | HDV | 12,000 bottles/h | 1999 - Palletizer | Kettner | PRESSANT UNIVERSAL | 17,000 bottles/h | 1996 Condition Used, still installed. The line produces one last time from 1 to 20 November 2026. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Dodpfx Apoz E Dk Esiecp

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  - Capacity: 44,000 bph (500 ml glass bottles) - Formats: 500 ml glass bottles - Filling principle: Isobaric (mechanical filling system) - Number of filling stations: 144 Dcodpfx Apjwif Dgjijp - Crowner: 24 stations (crown cork) - Operating voltage: 400 V - Frequency: 50 Hz - Control system: Siemens S7-400 - Control cabinet: Air-conditioned, stainless steel - Operating hours: approx. 30,000 (as of Nov. 2024) - Direction: Left to right Scope of Delivery - Filler: KHS Innofill DMG SVF 144-KK24 - Crown corker with 24 stations - Control cabinet and operator panel - Bottle clamping star wheels - CIP cups - High-pressure injection (HDE) - Bottle shower at discharge - Bottle table in roof optic - Central lubrication system - VPN remote access capability - Safety housing (updated in 2016, with flushing system) - Touch panel - Cork feeding unit by NSM - Filling level inspection system: Krones Checkmat (2015)

Condition: used, Year of construction: 2003, Overview This Krones Sander Hansen tunnel pasteurizer was built in 2003 for the pasteurization of beer in glass bottles. It is a double-deck machine with a nominal capacity of 40,000 bottles per hour on 0.5 l bottles. Its 12 treatment zones - 4 regenerative zone pairs and 4 pasteurizing zones - cover a treatment area of 241.6 m². At the design point it delivers 25.3 PU at 60 °C, with a total treatment time of 54.2 min (17.2 min heating, 19.9 min pasteurizing, 17.2 min cooling) from an inlet temperature of 12 °C to an outlet temperature of approx. 35 °C. Technical data - Manufacturer: Krones (Sander Hansen) - Year of manufacture: 2003 - Machine type: double-deck tunnel pasteurizer - Capacity: 40,000 bottles/hour (0.5 l glass bottles) - Treatment area: 241.6 m² - Decks: 2, main conveyors: 2 - Zones: 12 in total (4 regenerative zone pairs, 4 pasteurizing zones) - Max. spray temperature: 64.5 °C - Water content: 38.9 m³ in total (20.6 m³ in the zones, 18.3 m³ in the buffer tanks) - Steam: 2,270 kW design flow, approx. 1,100 kW in balanced operation - Main water: 77.8 m³/h design flow, approx. 1.0 m³/h in balanced operation - Compressed air: 5 m³/h - Electrical: 215 A rated current, 141.3 kVA, 113 kW, cos phi 0.80 - Overall length without operator platforms: approx. 24,752 mm - Width: approx. 5,580 mm (7,680 mm incl. pumps and operating area) Dcsdpe Af Tkhsfx Apijp - Pump side: right, seen from the infeed - Empty weight: approx. 74,000 kg (163,200 kg with product and water) - Largest section for transport: 12,000 x 1,100 x 2,250 mm - Transport: approx. 12 x 40 ft containers or trucks Equipment - Stainless steel housing with external circulation pumps and piping - Buffer tanks for regenerative water management - Local push-button control stations with emergency stops along the machine - Electrical cabinets and field terminal boxes - Operator platform with stairs Scope of supply The associated conveyor systems are not included. The scope of the conveyor system can be seen in the photos. Condition Used, still installed. The machine can be visited. Dismantling and loading can be carried out by the seller. Availability From 28 October 2026. Location: Poland.

Condition: used, Year of construction: 2003, machine/vehicle number: RV150, Consisting of: Dods Ahlr Iopfx Apiocp - Rinser 20 nozzles - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: Dcsdpfjyx I Awex Apiop - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2000, machine/vehicle number: 690-264, Machine: KRONES KGW-65-S-E Crate washer Dcedpfxo Ahlaaj Apiep