BORK Group

Condition: used, Year of construction: 1999, Used wood shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 1999 Technical data V - Rotor Motor 18.5 kW 400 V, 49 A, 90 rpm Hnjdpfjzu Ap Uex Ah Eer Feed opening 800x600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2003, Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Hedpfx Aezuz S Ish Eonr Technical data Rotor speed: 284 rpm Rotor diameter: 370 mm Infeed width: 800 mm Infeed height: 500 mm Drive power: at least 22 kW Weight: 1900 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, Shredder Manufacturer: Gross Hjdpfx Ajzuz Rkoh Eonr Type: GAZ62 Year of manufacture: 2015 Technical data Motor: 18.5 kW Speed: 91 1/min Voltage: 400 V Frequency: 50 Hz Weight: 1.3 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Wood Chipper JOCAR JD 500 Year of manufacture: 1995 Technical condition: Very good Technical specifications: Hnedpozut A Sjfx Ah Esr Main motor: 200 HP Maximum material cross-section: 300 × 400 mm Feed motors: 2 × 7.5 HP Infeed belt conveyor with vibrating chute Outfeed belt conveyor The price includes dismantling and loading onto the truck. Installation and commissioning are available at an additional cost.

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker waste material shredder, wood shredder, chipper, shredder MHR630 proline The MHR proline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and industrial operations seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready to connect - Siemens PLC controlled - MHR630 proline Rößler waste material shredder – “Made in Germany” Hnjdpfx Aezumuzjh Eor

Condition: excellent (used), CATALOGUE NUMBER 8040 TECHNICAL DATA - dimensions of the loading hopper (top, length/width): 850x1180mm - rotor width: 350mm Hnedpfx Ahezul Dhj Eor - engine: 22kW - screen size: 12mm - number of knives: 6 pcs - dimensions (length/width/height): 1260x1200x1890mm - weight: 980kg ADVANTAGES – German-made – very good condition – used shredder Net price: 25900 PLN Net price: 6167 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: excellent (used), CATALOGUE NUMBER 8068 Technical specifications: - chipper inlet cross-section: 410mm x 180mm - shaft width: 430mm - shaft diameter: 430mm - number of knives: 2 pcs - screen dimensions: 50/50mm, 50/130mm - top feed roller, toothed - bottom: 2 feed rollers, toothed - length of the feed belt: 3750mm - width of the feed belt: 380mm - auto-reverse (adjustable) Hedpfx Ahozukyhs Esnr - main motor: 22kW - feed motor: 2 x 1.5kW - machine dimensions (L/W/H): 5900x1500x870mm - weight: approximately 2000kg Advantages: - Polish-made - auto-reverse (adjustable) - with conveyor belt - DTR documentation - used chipper, very good condition Net price: 64,900 PLN Net price: 15,452 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8067 Technical data: - inlet width 400mm - inlet height 200mm - shaft width 540mm - shaft diameter 520mm - knife length 540mm - number of knives 2 pcs - screen dimensions 55x55mm - 2 geared drive shafts from below - motor for lower shafts 4kW - geared drive shaft from above - motor for upper shaft approximately 1.5kW - feeder belt length 3000mm - feeder belt width 400mm Hnjdjzuku Eopfx Ah Ejr - main motor 45kW - automatic reversing (with adjustable setting) - dimensions L/W/H 5900x1800x1200mm - weight approximately 3500kg Advantages: - German-made - with belt feeder - automatic reversing (with adjustable setting) - used shredder, very good condition Net price: 68900 PLN Net price: 16405 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 2025, New demonstration machine! List price €25,500 net. Machine concept WL 4 / 18.5 kW. The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed either via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on universal joints to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 256 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive and 4-way rotatable knives/cutting inserts are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction of the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption and an optimal discharge of the shredded material. The screen attached under the rotor determines the chip size (10 - 100 mm). On request, a hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor stub on one side. Equipment and technical data: Drive power 18.5 kWHopper opening with Logspacer: 600 x 1,050 mmHopper capacity: approx. 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 252 mmRotor speed 60-100 rpmNumber of knives: 28Type and size of knives: concave / 40 x 40 mm, cutting insertsScreen size: 12/10 mmPainting: Weima Standard RAL 2002 / 7016Connection value: 400 V +/- 5% / 50 HzWeight approx. 1,300 kg including:Control cabinet with display and 5 m cableElectrical controlStar-delta startRubber vibration elementV-rotor (patented) with knife pockets milled into the profileGearbox limit switch2nd knife rowClamping bar on the slide Hnsdpfx Ahszuf U Tj Esr Location:

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recycling shredder, wood shredder, chipper, shredder MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical yet powerful solution. The machines are manufactured and distributed directly from our factory in Germany. Hnjdpfxszt I Itj Ah Eer Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Includes Ecoring - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase power) - Siemens PLC controlled - MHR630 ecoline_Ecoring Rößler recycling shredder – “Made in Germany”

Condition: used, Year of construction: 2008, power: 90 kW (122.37 HP), Hacker Rudnick&Enners RE-TH 250/650/5 250 mm height 650 mm width Power 90 kW Cassel metal separator Approx. 40 linear meters of vibrating troughs Hsdezt Hrdepfx Ah Ejnr

Condition: excellent (used), CATALOG NUMBER 7610 Technical data: - Inlet width: 410mm - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg Hsdsztq Uvjpfx Ah Esnr ADVANTAGES – Manufactured in Poland – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse Hsdpfx Aoztq T Esh Ejnr - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm Hnjdpfx Ahoztq Sus Ejr - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Hsdpfxeztq Rwj Ah Esnr Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse - Reverse function Hsdpfx Aeztq N Toh Eonr - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) Hodpfx Ahsztq Nys Ejnr (Prices may vary with currency fluctuations)

Condition: excellent (used), Catalog number: 8069 TECHNICAL DATA - inlet dimension 600x960mm - outlet for shredded wood 200mm - 15kW motor - screen – for fine wood chips Hnedpfx Ahoztqz Ao Esr - shaft length 510mm - 2 shafts with counter-rotating knives - dimensions (length/width/height) 1400/1350/1900mm - weight 1450kg ADVANTAGES – very good condition – used wood chipper Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW Hsdpoztqt Sjfx Ah Esnr - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2023, functionality: fully functional, power: 294.2 kW (400.00 HP), overall weight: 9,000 kg, fuel type: diesel, operation weight: 9,000 kg, empty load weight: 9,000 kg, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 3,000 mm, loading space height: 2,500 mm, Stationary wood chipper Heizohack HM 14 800 K. Their biggest model of chipper with 14 knives and large drum. Machine is new with 0 operating hours. Industrial wood chipper capable of chipping all types of wood from hardwood to softwood. Wood logs and wood cutting waste. Hodpfx Ahoztqcye Eenr Infeed width 1200 mm Infeed hight 800 mm (effective chipping around 600 mm) Knives model blades: 95x50 mm (possible installation of thicker knives 7 and 9 mm with installation of thicker knife holders) Maximum chipping diameter: 60 cm (possible more with turning the log) Chipping capacity per hour aprox: 120 m3/h (some customers achieve more) Ejector control automatic with 3.5 m height. Can fill any type of trailer. Machine is ready for production, no installation needed. For more information feel free to contact us.

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 30 kW (40.79 HP), overall weight: 2,500 kg, total length: 2,506 mm, total width: 2,172 mm, total height: 1,830 mm, working width: 1,310 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 32, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 1,310 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Waste material shredder, Hacker wood shredder, chipper, shredder, MHR1330 ecoline The MHR ecoline series consists of robust and energy-efficient wood shredding machines, designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies that are looking for an economical and powerful solution. This machine is manufactured in our factory in Germany and is specifically designed for shredding pallets and bulky parts. We will gladly provide you with further information and videos demonstrating its operation upon request. Advantages: - Continuous, uniform shredding process - Ecorings included Hnedpfx Aheztkz Ae Ejr - High performance with low energy consumption - Robust construction, brass sliding strips - Larger feed opening - Excellent value for money - Ready to connect - Siemens PLC controlled - MHR1330 ecoline Rößler waste material shredder – “Made in Germany”

Condition: good (used), Year of construction: 1996, Shredder Manufacturer: Weima Type: WL 4 Hnjdpfsztawysx Ah Ejr Year of manufacture: 1996 Motor: 18.5 kW

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm Hnodpfx Ahoztau Se Esr - Rotor working width 1020mm - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Similar to WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer - Electric auto-reverse Hnodpjztaulofx Ah Ejr - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm Hnedpfx Aheztat Ie Ejr - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)