Condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 22226 Nedpfx Aaoycpu Uexskt Specifications: Atlas 1238 hammer Well used, requires some maintenance Last used summer 2025 Dust collector S70 mounting Ready for delivery Own weight: 11 Model: Boretårn m/ Atlas 1238 Hammer.

Year of construction: 2011, condition: used, Field of application: Construction Serial number: 110245xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20555 Specifications: Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Nedpfx Aaswph Egexjkt Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hours: 7200 Own weight: 11 Model: Gemrok 45 borevogn. SE VIDEO

Year of construction: 1999, condition: used, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 11049 Specifications: - 1999 model - Hours: approximately 12,750 - Winch - Vacuum cleaner - 38 hammers - 4 cylinder water-cooled Deutz engine - Okay chassis - Ready for delivery Description: Owner says it works as it should and that it is a 1999 model It is Ready for Delivery Njdexlnliopfx Aaxekt Own weight: 1 Model: Copco Roc Borerigg

Condition: used, New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Own weight: Width: 255 Hammer hours: 3049 Engine hours: 5224 Model: DHA 400 S Nedpfowph D Ajx Aaxjkt

Year of construction: 2021, condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 22039 Nkjdox Hnw Dspfx Aaxot Description We have a 2021 swepac TR 950R concrete helicopter for sale. Everything works as it should and everything should work, says the owner. It comes with extra spoons. Ready for delivery

Condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20609 Specifications: - Unknown year - Montabert T28 hammer - Remote control with cable - Air hoses need to be replaced - Air-powered hammer with grease pot - S50 attachment - Errors and defects may occur - Ready for delivery Description: We have a Drilling tower w/ s50 attachment and Montabert T28 hammer for sale. The tower is controlled by remote control with cable. The tower has not been used for a while so errors and defects may occur. Air hoses need to be replaced. Ready for delivery. Own weight: 1 Model: m/ s50 feste Nodpfx Aajwph Izexskt

Condition: used, Year of construction: 2019, New: No Field of application: Construction Serial number: 03xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16463 Specifications: -2019 model - 2050 engine hours - 347 operating hours - Hc 95 Montabert hammer - 390 compressor hours - L5 Gps - Straight grinder - Rotabom - Winch - Central grease Njdpfevg Hvaox Aaxokt - 249cm machine width - 30 cm belt width - Range of 4.90m - 40cm2 drilling circle - Overcarriage can turn 360 degrees - Service history - Commuting on belts - Delivery by agreement Description: Great Stone Scout sold with few hours. Just had 1000 hours of service. Has a reach of 4.90 m and can drill approx. 40 cm2 in one space. Comes with L5 Gps and straight grinder. Delivery by agreement. Hours: 968 Width: 249

Condition: used, Year of construction: 2004, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Remote control Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Nkodpjvg Nt Isfx Aaxjt Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000 Own weight: 12600 Model: 55S

Year of construction: 2014, condition: used, Field of application: Construction Serial number: 11-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17779 AMV Specifications: Nkodpfxjx Eg Ipe Aaxet Model year: 2014 Not certified Engine hours: approx. 2100 h Transmission hours: approx. 620 h Compressor hours: approx. 11 000 h Pump hours: Pump Left: approx. 10 900 h Pump Center: approx. 11 300 h Pump Right: approx. 10 800 h Hammer hours: Left: approx. 4000 h Center: approx. 3900 h Right: approx. 3800 h Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) Diesel tank: 160 liters Transmission: Dana hydrostatic C272.5 Max speed: 15 km/h (horizontal) Machine weight: 50 tons Central lubrication Width: 2920 mm Height: 3450 mm Total length with 18 ft. feeders: 16 100 mm 4 stabilizers Montabert HC 110 Max impact frequency: 35 kW Max impact pressure: 187 bar Rotation speed: 50–300 rpm Lubrication air consumption: 300 L/min Flushing water consumption: 133 L/min (per hammer) Electronic feeder Charging basket Automatic collaring Dafo Forrex fire extinguishing system for engine compartment Feed beams BDS-8000 Ready for delivery Description:AMV 21SGBC-CC tunnel rig for sale.Service has been carried out continuously.Everything works as it should according to the owner.Spare parts can be included for an additional cost if desired.Ready for delivery. Own weight: 50000 Model: 21SGBC-CC Tunellrigg

Year of construction: 2015, condition: used, Field of application: Construction Serial number: 11-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17783 Specifications AMV: Model year: 2015 Not certified Engine hours: approx. 2300 h Transmission hours: approx. 700 h Compressor hours: approx. 8100 h Pump hours: Pump L: approx. 8900 h Nsdpfx Aex Eg I Aeaxokt Pump R: approx. 9200 h Pump H: approx. 8800 h Hammer hours: Left: approx. 3000 h Right: approx. 3200 h High: approx. 3000 h Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) Diesel tank: 160 liters Transmission: Dana hydrostatic C272.5 Max speed: 15 km/h (horizontal) Machine weight: 50 tons Central lubrication Width: 2920 mm Height: 3450 mm Total length with 18 ft feeders: 16,100 mm 4 support legs Montabert HC 110 Max impact frequency: 35 kW Max impact pressure: 187 bar Rotation speed: 50–300 rpm Lubrication air consumption: 300 L/min Flushing water consumption: 133 L/min (per hammer) Electronic feeder Charging basket Automatic drilling control Dafo Forrex fire suppression system for engine compartment Feed beams: BDS-8000 Ready for delivery Description:AMV 21SGBC-CC tunnel rig for sale.Service has been performed continuously.Everything works as it should according to the owner.Spare parts can be included for an additional cost.Ready for delivery. Own weight: 50000 Model: 21SGBC-CC tunnelrigg

Condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 18477 Description: Atlas ROC 712 H-01 drilling rig is sold as a repiar object as it is in an uncertain condition. It was in use 2 years ago, the owner says. The engine hours on it are 18902 hours and stroke hours are 9771 hours. The drilling rig does not have a compressor. Ready for delivery Own weight: 10000 Model: ROC 712 H-01 borerigg ekt uten kompressor Njdpfxox A R Unj Aaxjkt

Condition: used, Year of construction: 2012, Field of application: Construction Serial number: 120220xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18508 Specifications: Nkjdpfx Ajv U Sggoaxjt 2012 model Approx. 1,000 hours 250 m drill rods Suitable for well drilling and horizontal drilling 5 drill hammers included: 2 × 4-inch, 5-inch, 6-inch, and 8-inch (the 8-inch is brand new) Includes hoses and various additional equipment Grinding machine and drill bits included High-pressure washer Generator Welding machine 150 m air hose Location: Iceland Hours: 1000 Own weight: 14000 Total Weight: 14000 Model: Gemrok GDT brønnborerigg

Condition: used, machine/vehicle number: 40118, fuel type: diesel, Make of engine: Hino Reconditioned: Yes Delivery terms: EXW Production country: JP Please contact Christiaan Dekker for more information Hino EM100 engine complete Total rebuilt Nedpfxsyc E R Sj Aaxekt Used in Hitachi crawler crane Price Euro. 9.500,-

Condition: good (used), Part suitable for: trucks Technical condition: good Visual condition: good Price: On request Nkedpfeyc Eczox Aaxot VAT/margin scheme: VAT deductible

Condition: good (used), Part suitable for: trucks Technical condition: good Visual condition: good Njdpfx Aaeyc Ecuoxekt Price: On request VAT/margin scheme: VAT deductible Type number: 789588

Condition: good (used), Part suitable for: trucks Technical condition: good Visual condition: good Nedpjyc Echofx Aaxokt Price: On request VAT/margin scheme: VAT deductible Type number: 789368

Condition: used, New: No Part suitable for: trucks Overall condition: good Technical condition: good Visual condition: good Nkedpfx Aasyc Ecbexjt Price: On request VAT/differential taxation: VAT deductible Type number: 1949909

Condition: used, Year of construction: 2023, Weight: 1.5 kg = Further Information = Year of manufacture: 2023 Model year: 2023 Unladen weight: 1 kg Part suitable for: DAF XF, XG, XG+ (2023) Nkodpfxoyc Eb Rj Aaxot Type number: 0066488 Serial number: 0066488 Please contact Maurits Van Giessen for more information.

Condition: used, power: 1,044 kW (1,419.44 HP), fuel type: diesel, number of cylinders: 8, Emission class: Euro 1 Nksdpfx Aasycwl Uexjt = Company Information = For further information, you can reach us on weekdays from 8:30 a.m. to 5:00 p.m. and on Saturday from 10:00 a.m. to 3:00 p.m. via telephone. You can also email us at: See you soon!

Year of construction: 2016, condition: used, Box body – Side doors – 7.50 – 2.50 – 3.20 = Further Information = Year of manufacture: 2016 New: No Colour: White Part suitable for: trucks General condition: good Technical condition: good Visual appearance: good Nkedeyc Ea Topfx Aaxst Please contact VAEX The Truck Traders for more information.

Condition: used, New: Yes Marking: Kogelkranen tot 8 inch Nsdpfx Aoycw Ntsaxekt

Year of construction: 2018, condition: used, New: No Power: 313 kW (426 HP) Nedeycqtlspfx Aaxokt VAT/margin: VAT qualifying

Year of construction: 2018, condition: used, New: No Nodpfxsycqtfj Aaxjkt Power: 313 kW (426 HP) VAT/margin: VAT qualifying

Condition: new, Various axles Nedpfeycqh Aex Aaxjkt Axle 160cm 50x50 6 holes (N6792) Axle 170cm            8 holes (N6795) Condition: New

Condition: used, General information New: Yes Serial number: 1034140 / 9290341 Weights Empty weight: 605 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1x1x1 Production country: JP Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Nsdpox R Ry Nofx Aaxokt