Weiss WT-1000/70/5 Temperature Test Chamber 1000L -70/+180°C 6.1 K/min Heating 6 K/min Cooling

Weiss WT-1000/70/5

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Gujdpfxozfy Rwe Aipsh Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Gsdpfx Ajxg Rhvsipsuh

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, Full enclosure with vacuum extraction Roller shutter door for crane loading Pick-Up station for 3 angled milling head  Face machining possible to generously sized areas Distance spil to table 140 - 740 mm Pendel screen for splitted manufacturing Coolant tank filtration 350 Liter HR410 Handwheel HeidenHain Double LTA Oil Mist   Flexible, high-precision machining of large and complex parts, with reliable German build quality. X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6200mm Width: 3500mm Gjdpfx Aiox Sxx Nopouh Height: 3600mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A used climate chamber Guedpfx Aieph U Ayspeh Microprocessor-controlled control and monitoring system SIMCON/32 32-bit technology Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: used, RS Simulators RS Simulators ST2K 1000 / 55 Temperature Shock Chamber Water-cooled The unit was regularly serviced and maintained by the manufacturer until it was decommissioned. For sale is a high-performance temperature shock test chamber, type ST2K 1000 / 55. The unit is ideal for standard-compliant thermal shock tests in accordance with DIN EN 60068-3-5, as well as for demanding material and component tests. With its two separate temperature chambers and automatic horizontal test basket transfer, this unit offers the perfect solution for reliability tests in industry, automotive, research and quality assurance. Key technical data: Temperature ranges Upper test chamber (hot chamber): +40 °C to +180 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Lower test chamber (cold chamber): –70 °C to +100 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Test basket transfer: Horizontal movement (automated) Fast changeover for temperature shock tests Guedpfx Aioy H Igfopjh Test chamber / usable volume (Type ST2K 1000) Volume: approx. 580 liters Internal dimensions: Width approx. 1070 mm, Height approx. 680 mm, Depth approx. 800 mm Max. load: approx. 150 kg Power supply: Total power: max. 33 kVA Current consumption: max. 65 A Mains connection: 3 × 400 V / N / PE / 50 Hz Main power cable: 5 × 25 mm² Water & compressed air connections Cooling water inlet: G 1", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized, max. 22 °C Condensate drains: multiple (non-pressurized) Compressed air connection: quick-release coupling NW 7.2 (G 1/4"), min. 4 bar, max. 10.5 bar Dimensions & Weight: External dimensions: Width: approx. 2800 mm Height: approx. 2400 mm Depth: approx. 2200 mm Weight: approx. 2800 kg Equipment Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm width) Full-fledged changeover cabinet Observation window Internal lighting SE-604 control unit Program operation and data recording possible RS232 interface Other technical data Sound level: approx. 67 dB(A) at 1 m distance (free field) Refrigerant: R449A: approx. 8.0 kg (GWP 1397) R23: approx. 2.5 kg (GWP 14800) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25 %–75 % RH Operating hours approx. 4,500 hours For your security as a buyer, please note the following information! The following points will be carried out on our offered units in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (see pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: used, CTS Climate Testing Chamber Type: C-70/1000-S CTS Climate Testing Chamber / Environmental Simulation Chamber Model: C-70/1000-S Water-cooled version For sale is a high-quality CTS climate testing chamber for precise temperature and climate testing in research, development, quality assurance, and industry. The unit is in used condition. See images for visual condition. Control panel, viewing window, and test specimen protection are included. Temperature and Climate Data: Test chamber volume: approx. 1000 liters Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min (heating) Temperature change rate: approx. 2.5 K/min (cooling) Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: Electrical connection: 400 V / 3/N / 50 Hz Rated power: 9.7 kW Rated current: 17.9 A Protection class: IP 22 Refrigerant according to nameplate: Pre-cooling stage: R404A – 2.3 kg Cooling stage: R23 – 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: CTS control panel with LCD display Digital setpoint and actual value display Program operation Viewing window in the door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Side cable glands Glands approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile version on rollers Dimensions according to layout plan: External dimensions: approx. 2245 x 1270 x 1950 mm Installation dimensions: approx. 2350 x 1290 x 2000 mm Weight of test chamber: approx. 1000 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Layout plan available Quick start guide available For your security as a buyer: The following steps can be carried out in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: CTS Climate Testing Chamber C-70/1000-S Documentation as available Guodey Iam Hjpfx Aipoh Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement. Loading via forklift can be arranged. Changes, prior sale and errors in the technical data are subject to change. If you have any questions, please do not hesitate to contact us.

Year of construction: 1999, condition: used, We offer this used Vötsch VT 7100 climate chamber, year of manufacture 1999. Device number: 59566005700010 Year of manufacture: 1999 Refrigerant: R 404A Refrigerant charge: 4.2 kg Permissible operating overpressure: 25 bar Stand pressure: 70 bar Voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated output: 11.5 kW Rated current: 22.0 A Wiring diagram no.: EPL 66912 Gedpfeyu Hwqex Aipjuh System diagram no.: RPL 67612041W If you have any questions or need further information, please feel free to send us a message or call us.

Year of construction: 2010, condition: used, 2010 Votsch VCS 7310-5 H/S Heavy Duty, High-Performance Environmental Chamber With Acquisition Unit - Internal Dimensions W1,100 D1,320 x H2,080mm. S/No. 59566147420010 (2006). Gusdpfxoz N Hyrj Aipeh