Weinig GRECON TURBO S finger jointing

Weinig GRECON TURBO S

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz Hedjuz Hmxspfx Ad Nsng - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm Hnjdpfxotuuv Ne Ad Nog - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Hodjm Habdopfx Ad Nong

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment Hnodpfxevibc He Ad Nog 2 precision motor spindles to absorb the diamond discs.

Condition: excellent (used), operating hours: 10 h, functionality: fully functional, Grecon Dimter Ultra automatic wood joining line Machine after major renovation. Specification: Tenner: Sawheadstock: - Spindle speed: 3000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling headstock: - Shank diameter: Ø50 mm - Usable shank length: 210 mm - Max. tool diameter: Ø250 mm-Ø150 mm - Spindle speed: 6000 rpm - Milling motor: 15 kW / 3000 rpm - Chip extraction: Ø150 mm Feed table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Steplessly adjustable Dust extraction: Chipper exhaust port diameter: Ø100 mm Mill exhaust nozzle diameter: Ø150 mm Dust extraction capacity (flow rate): ~2400 m3/h Pneumatic system: Working pressure: 6 bar Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h) CONTI M 6/6000 longitudinal wood joining press: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6000+15-50 mm - Pressing force: 3 – 7.5 T (3 000 – 7500 daN) Circular saw: - Saw diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3000 rpm Dust extraction: - Saw exhaust nozzle diameter: Ø100 mm - Dust extraction efficiency (flow rate): ~400 m3/h Pneumatic installation: - Working pressure: 6 bar - Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h) Scope of renovation work: 1. Cleaning the machine bodies and applying new paint 2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts. 3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones; 7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press. 8. Regeneration of electromagnetic brakes on the tenoning machine 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones. 10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones. 11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones. 12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs Hedpfx Asuddvaod Njng 13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector; 14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams. 15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates. 16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines; 17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones. We specialize in wood joining machines. Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.

Condition: ready for operation (used), Glue application unit with 2 rollers - Glue specification for package height 300mm using 1 application roller and 1 dosing roller Hnodpfxeht Rtao Ad Nog - 1 x left - 1 x right - Suitable for DIMTER HK 200 + HK 400 + HK 800 + HK 1000 Spare parts Dimter Accessories dimmer

Condition: new, Year of construction: 2026, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 450 mm, cutting length (max.): 6,200 mm, power: 15 kW (20.39 HP), saw blade diameter: 550 mm, total length: 8,100 mm, overall weight: 2,700 kg, table width: 450 mm, height adjustment type: mechanical, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 160 mm, working height: 850 mm, compressed air connection: 6 bar, warranty duration: 12 months, The FLS technology with a floating unit represents a modern and versatile method for the longitudinal splitting and formatting of materials, placing a strong emphasis on production flexibility. Hsdpfoubbubox Ad Njng This proven technology enhances yield, work productivity, and maintains the quality of wood material with particular attention to the cleanliness of the cut. FLS circular saws are characterized by a high level of safety and straightforward operation.

Condition: good (used), Year of construction: 2004, bore capacity in steel (diameter) 28 mm throat 300 mm bore stroke 150 mm distance spindle /table 60-765 mm distance spindle/base plate 1.200 mm taper MK 3 threading M20/M24 column diameter 115 mm table-size 510 X 425 mm spindle turning speed - stepless 60 - 1:400 U/min total power requirement 1,4 kW weight of the machine ca. 350 Kg. Hnsdpfx Ajwgi Evsd Nog dimensions of the machine ca. 1,9 x 0,6 x 0,9 m - Digital spindle speed display - Foot switch - Thread cutting device - Left-right rotation - 2-speed motor

Condition: ready for operation (used), Year of construction: 2004, Characteristics: The Rondamat 168 is extremely simple and as versatile as possible to operate. The machine sharpens straight planing knives, milling tools and circular saws. 40mm shaft Wet grinding Maximum tool diameter 350 mm Hnodpfxsh Txfde Ad Njg Disc diameter 150 mm Maximum tool length 240 mm Tooth pitch min. 32 mm Tooth pitch max. 20 mm Main motor power 1.1 kW Total connection 1.5 kW

Condition: new, Type MJ1435F Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Cutting width 300 mm Hnsdped Nlvpofx Ad Nog Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.