Planer and moulder

Weinig 260 mm Profimat 23

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. Phedpfx Aohbduzjf Sea The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Phodpfxjwnx Agj Af Ssa Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, carrying capacity per cantilever arm: 810 kg, load capacity: 3,900 kg, shelf height: 2,500 mm, total length: 38,750 mm, axle spacing: 1,250 mm, clearance between the columns: 1,250 mm, load capacity per stand: 3,900 kg, throat depth: 800 mm, We hereby offer you, subject to change, 39 linear metres of used heavy-duty cantilever racking, with a load capacity of 3900 kg per stand. Manufacturer SSI Schäfer GmbH Type KR Year of manufacture 2008 Stand load per stand side 3900 kg Support profile stand IPE 180 Stand height 2500 mm Cantilever arm length 800 mm Cantilever arm load 810 kg Cantilever arm profile with deflector INP 80 Composition: 34 stands 68 cantilevers 6 cross braces, axis dimension 1250 mm Phsdpfjvt Um Hex Af Sja 72 longitudinal braces, axis dimension 1250 mm Cantilever arm shelving system 1: 16 stands, 15 bays, 34 cantilevers, 30 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 17.5 linear meters Cantilever arm shelving system 2: 18 stands, 17 bays, 38 cantilevers, 34 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 21.25 linear meters Condition: The cantilever rack is in very good condition as you can see in the photos and is loaded onto pallets dismantled. The above technical data was taken from the manufacturer's brochures or other sources for which we cannot guarantee their accuracy and completeness. The sale is without guarantee or warranty. We would be pleased if this cantilever rack is of interest to you and look forward to your inquiry. Your Mertens & Frowein GmbH service team

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Psdpfx Afjw R Hire Ssha Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, tool diameter: 140 mm, warranty duration: 3 months, shaft diameter: 40 mm, number of spindles: 5, extraction connection diameter: 140 mm, input frequency: 50 Hz, feed roller diameter: 140 mm, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: cabin, motor brake, Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Phsdsv Nkufopfx Af Ssa Number of spindles 5 Spindle arrangement: 1. Bottom 7.5kw 2. Right 3. Left 11kw 4. Top 7.5kw 5. Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed regulated by means of an inverter Feed drive on cardans Infeed table length 1970mm CE certificate

Condition: used, Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with ATS system. spindles: 6 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Right spindle 5: Upstairs spindle 6: Below working width: 230 mm working height: 120 mm Dressing table length: 2.000 mm Planer table length: 2.000 mm control: ATS Pedpfjw I A Sqox Af Ssha Control: ATS delivery time: On demand sample picture: Illustration similar

Condition: used, Four-side planer WEINIG Quattromat 18 -used- Reversible knife system, Lubricant pump, Dust tested ----- Technical specifications ----- Planing width: 180 mm, Planing height: 120 mm, Number of spindles: 4, Feed speed: 8 m/min, Extraction port Ø: 4x 120 mm, Dimensions (LxWxH): 3,050x1,000x1,500 mm, Weight: 1,200 kg Podjxqd Ahopfx Af Ssha

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Workingwidth: max. 230 mm / min. 18 mm. Workingheight: max. 150 mm / min. 8 mm el height adjustable Podpfx Aoxr U Azsf Ssha Speed 7-36 m/min. 3,7 kw motor, cardan 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen see all technical features attached file

Condition: new, functionality: fully functional, Description Boom Spreader Hanging Bar 1.Suitable for different size glass 2.Seamless steel pipe with diameter ups to 146mm 3.Smooth surface makes zero damage to the glass sling 4.Epoxy paint, anti-rust and anti-corrosion 5.Eye-catching specification Description The hanging bar has many advantages. Based on the different size of the glass pack, the hanging bar is a universal for the glass length from 2000mm-3600mm. Designed in accordance with the principles of mechanics, the longitudinal and transverse bearing capacity is precisely calculated, and a new style of perfectionist suspension bar is designed by using 3D model. The diameter of seamless steel pipe ups to 146mm. The industrial-grade welding machine is used for deep penetration welding, and the welding point is polished finely without damaging the sling to ensure the safety of use. The surface is treated with epoxy paint to prevent rust and corrosion, UV, strong adhesion and long service life. There are eye-catching specifications on each position of the strap, which is more worry-free. Features Phsdpfsxpuldjx Af Soa Suitable for different size glass Seamless steel pipe with diameter ups to 146mm Smooth surface makes zero damage to the glass sling Epoxy paint, anti-rust and anti-corrosion Eye-catching specification Model RSY-XSDGO8 Capacity 4 tons Length 3150mm Diameter 146mm Suitable glass length 2000,2200,2400,3050,3300,3600(mm) Slots number 8