Stacking system

TIMME Stapelautomat

Condition: used, Sorting / stacking system consisting of: - Cross feed conveyor - Tilting table - Disposal conveyor for intermediate laths - S-conveyor - Alignment roller conveyor - Double cross-cut station - 3 sorting boxes (1x reject, 2x stacking boxes with hydraulic lift) - Electrical components, if available - Accessories, if available Total width: approx. 7.5 m Total length: approx. 14 m Total height: approx. 3.5 m Sawn timber lengths: 3–5 m (possibly up to 6 m) Gedjy Da Agspfx Acheud Location: Austria, near Vienna

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-maintained HIT arc conveyor / board or panel separator, robust design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Guedpoxl Ediofx Ached Sturdy chains with slat carriers, 6x2, 2 pairs. Integrated edge roller conveyor. Transfer cross conveyor, can be raised and lowered. Slab flap. Drive with SEW geared motor with brake. Arc conveyor bolted in the middle for transport. Disassembled and ready to be loaded onto a truck. Ideal for use before a double edger or stacking system.

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and cross-cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Boards are transported laterally using a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm inclined - Alignment roller section - Chain cross conveyor as a layer former - Star infeed and inspection unit before the trimmer - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (seated) at the joystick assesses: without re-trimming, 5000 mm into stacking machine 1, alternatively: without re-trimming, 4000 mm into stacking machine 1 with re-trimming, 4000 mm into stacking machine 2 with re-trimming, 3000 mm into stacking machine 2 with re-trimming of short lengths for discharge into a box with re-trimming of short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut – cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 – ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee was able to produce, package, and strap approximately 15,000 boards of size 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping unit has already been dismantled. The system is therefore immediately available. It is very robustly built and has always operated smoothly and without any problems. Gedpfxsy Uzlds Achoud

Condition: used, Board packing mechanization. Gsdpfov Ebcxsx Acheud The line includes: - board hill, - roller conveyor brings boards to one end, - cross conveyor with separation function, - board packer, - liner cassettes, - board package elevator, - output conveyor chains. Material length up to 1.8 m. Manufacturer Kallfass Country of manufacture: Germany

Condition: used, Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Working height 160 mm Gujdpfxjy Ery He Achod Feed motor 11 kW Feed speed 60 m/min. Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of timber including infeed mechanization Weinig High Mech E 1. The machine has a Memory Plus system with electronic positioning (radial) of the spindles 3

Condition: excellent (used), Year of construction: 2013, I sell the fourside moulder Weinig POWERMAT 600, year 2013 Working width 230mm Working height 130mm 6 spindles configuration: Bottom Godpfx Acoyznrkohjud Right Left Top Top - 8000rpm Bottom 3-zone pneumatical pressure Good condition Fully working! Available immediately Including full documentation and CE certyficate.

Condition: used, tilting depiler for 6-meter packages, discharge chains, four-sided feeder with striking wheel, moulder outfeed with stacker, price on site not dismantled Gjdpfx Acjyw S Rvohoud

Condition: used, Cascade-type cross conveyor: - total length 7250 mm - total width 2100 mm - chain pitch 300 mm - five chain sections - motor power 4 kW Gjdpjxuip Ijfx Achjud - six discharge chains