Panel saw upright

Striebig COMPACT 5220

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Hedswka Ntopfx Af Uofg Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, Vertical +-90°. Horizontal radial +-90 Axial horizontal +-45 Engine power 5.5 kW LAFERT Saw blade diameter fi.565x30mm (standard 500x30mm) Hfjdswyaixjpfx Af Ujg Cutting length up to 960mm Cutting height up to 195mm (with 565mm saw blade) Cutting height at 45° up to 115mm 380V

Condition: used, Year of construction: 2003, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, saw blade bore: 30 mm, overall weight: 1,200 kg, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, section length (max.): 4,300 mm, The machine has been tested for functionality, sale without warranty! Description The used STRIEBIG CONTROL 5224 is a high-performance vertical panel saw with electronic control for precise and efficient cutting operations. It is ideally suited for professional use in joineries and industrial enterprises. Thanks to its robust construction and proven STRIEBIG technology, the machine offers excellent cutting quality and reliability. Machine equipment - Electronic control (CONTROL) - Vertical and horizontal cutting capability - Precision guidance system - Stable roller support - Extraction port - Sturdy steel frame Hfjdpfjyyk Hzox Af Usg Further technical data Vertical cutting height: 2,240 mm Horizontal cutting height: 2,100 mm

Condition: new, Year of construction: 2025, Cutting length: 5100 mm Cutting height: 2200 mm Hjdpfx Ashpma Eef Uefg Cutting depth: 60 mm Scoring unit: yes Feed: manual Horizontal cut display: digital Vertical cut display: digital Saw blade diameter: 300 mm Swing-out material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Machine length: 6300 mm Machine depth: 1800 mm Machine height: 3100 mm Weight: 850 kg

Condition: used, Year of construction: 2014, Technical Description: Cutting Height: Vertical: 2,150 mm, Horizontal: 50–2,000 mm Cutting Length: 4,300 mm Cutting Depth: 80 mm (with clamps: 55 mm) Saw Blade Protrusion Behind Workpiece: approx. 15 mm Saw Blade: Diameter 303 mm, Bore 30 mm, Z=60 Alternate Top Bevel Saw Blade Rotation: 4,200 rpm Motor Power: 4 kW (5.5 HP) Required Air Pressure: 6 bar Material Support Rollers: 20 ball-bearing rollers + 2 infeed/outfeed rollers Panel Locking for horizontal cuts via pneumatic workpiece clamping system, controlled by a switch on the operator panel. Middle Support: 3 support elements for 3 m support, foldable individually by hand. Hodpfx Asy Rphxsf Uefg Dimension Readout for: - Horizontal Cuts: by digital readout with zero reset (for strip cutting from top to bottom), by scale from 0–2,100 mm, and by strip stop from 75–730 mm - Vertical Cuts: by electronic digital display and scale from 0–1,300 mm Extraction Nozzles: 100 mm for the saw unit and 120 mm for the rear extraction ducts, positioned on the right side of the machine frame. Equipment Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping jaws motor-driven on ball screw along vertical axes. The clamping jaws can be positioned to the upper edge of the panel via joystick. The jaws automatically detect and stop at the panel’s upper edge using a contact switch. After reaching, the jaws close and secure the panel. They support panels up to max. 150 kg. The jaws can lift the panel for lower edge trimming, then relocate it with the trimmed edge resting on the lower support (also detected by contact switch). The jaws can then be raised again or continue holding the panel during horizontal cutting to relieve the cut. This prevents the panel from dropping onto the saw blade after the horizontal cut! Standard distance between clamps is approx. 1,800 mm. Position: right side of the machine (other positions available at extra cost). Minimum strip height with Advance jaws: 400 mm. - Electropneumatic scoring system for chip-free saw cuts by double cutting with the main blade (no scoring width adjustment needed – always ready to use – user-friendly) - Torsion-resistant, freestanding machine frame. - Round rod guide for vertical and horizontal travel. - Pneumatically retractable slatted panel prevents contact between saw blade and rear wall slats (strip). A sensor detects slat position; the grid recoils pneumatically if the saw would hit a slat. - Extraction nozzle on the saw head for dust collection in front of the workpiece. - Extraction nozzles for 3 vertical extraction ducts for dust generated behind the workpiece. - Fine-adjustable flip stop for vertical cuts, guided on a 30 mm round bar. - Extension stop (eliminating the need to lift heavy panels from the lower rollers onto the middle support). - Fine adjustment for horizontal cuts via handwheel. - Foldable strip cutting stop with ball bearing sensor along upper panel edge, adjustable from 75–730 mm.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Hodpfx Afsvz Eg Hs Uefg Total power requirement 3 kw

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Hfjdpfey Sazrsx Af Uog Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting area 5300 x 2240/2100 x 80 mm Cutting depth 80 mm Scoring unit Automatic feed Automatic plunge in/out Automatic swiveling Digital display for X and Y axes Automatic locking of the saw beam The machine will be available from around mid-September. Hfjdpfxjy D R Dbs Af Ueg