SIRIO Panel Loading - Loader

SIRIO

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of Manufacture: 2005 Quantity: 8 units Type: Isobaric pressure tank Application: Fermentation, maturation, storage of carbonated beverages Capacity: 500 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet Working Pressure: 6 bar Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm Klsdpfxjy Hkkas Agpeu

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Kledpfxswrz Dbo Agpeu Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Kedpfxokt Uuas Agpjlu Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"

Condition: used, functionality: unexamined, Ferwood Code: RU0008671 - Dimensions: 6500X1100X250 mm - Rollers L=600 mm - Condition: Used - Functionality: Not tested - Compatible machine: AUTOMATED LOADING AND UNLOADING HOMAG - BIESSE - SCM - IMA. If interested, we offer an overhauling service. Contact us. Kedpfx Agjv Hglzspjlu