Suction plant 8000 m³/h

Riedex DM-350RV

Condition: used, Year of construction: 2009, Technical details: Bwodpfxou Nu Iyj Aaqoh basket dimensions: 1160 x 600 x 500 mm heating capacity: 4 kW rated capacity: 16 kW rated current: 400V / 50/60 Hz A heating capacity: 4 kW temperature range: 0 - 60 °C weight of the machine ca.: 0,308 to dimensions L x W x H: 1,5 x 1,0 x 0,95 m Industrial Washing Plant The ultrasonic washing system (bath) is composed of external generator for two inserts. Type MW 2000 GT with 25 kHz sound power 2x2000 Watt with 9 levels adjustable continuous/pulse operation ultrasonic time adjustable The housing, the insert basket and the cover are made of stainless steel. The washing unit stands on a lower tub. Inner dimensions: L:1160 x W:600 x D:500mm (to drain 410mm) Protection class IP23 *

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Bsdpfxjvxlqmj Aaqswh Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Bwsdpfxov Nztxs Aaqoh Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Condition: good (used), Year of construction: 2008, Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg Bwsdpfx Aaephup Asqsh -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Condition: used, Year of construction: 2008, roll diameter 300 mm Wheel width / mm Distance of shafts / Roller block turning device EU-RB 3000MS Gesamtabmessung: 2060x1002x555mm Adjustment of the roller brackets: manual, centric Locking: secured locking pin Weight: 750kg Max. Max. load capacity: 3000kg Workpiece diameter: 150 x 3000mm Roller diameter: 300mm Torque on the drive roller: 500 Nm Peripheral force on the drive roller: 3300N Feed speed: 100 - 2000 nm/min Supply voltage: 230 V/50 Hz Connected load: 2.3 kVA Bedpfx Aajt Ukxqsqowh

Condition: used, roller conveyor 3000-740-700 RA2294 Make: Blume Roller width (RB): 700 mm Nominal/outer width (NB): 740 mm Length: 3000 mm Bwodpotqfa Eefx Aaqeh Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), We offer you here a used roller bar of the manufacturer Bito to the purchase. Included in delivery are: 01x roller bar, used Manufacturer: Bito material colour frame: galvanized material colour rolls: similar cream white segment length: approx. 2.460 mm segment width: approx. 38 mm roller width: approx. 25 mm Pitch: approx. 25 mm roller diameter: approx. 20 mm Frame height: approx. 25 mm Material of rollers: plastic Bsdpog Iim Hsfx Aaqjwh Shipping costs on request

Condition: used, Year of construction: 2018, Executed according to FprEN 16770 Tested according to GS-HO-07 testing principles of BGHM Offline filter cleaning with automatic fire extinguishing system The dust extractor is a suction and filter unit for commercial use, designed for installation in the workplace. The dust extractor is suitable for capturing, conveying, and filtering dry wood, paper, or plastic chips and dusts from one or several processing machines. The unit is delivered fully assembled and ready for operation. Consisting of: - Pressure-resistant and pressure surge-resistant housing (>200 mbar) - Suction nozzle with non-return valve - Antistatic filter elements - Jet-pulse cleaning - High-performance radial fan with IE3 efficiency class three-phase motor (arranged on the clean air side) - Exhaust air silencer and air outlet grille - Control unit with CEE plug (phase inverter) - Automatic start control for up to 6 machines (activation via current coils or potential-free contacts possible) - Automatic filter cleaning with runtime addition - Integrated extinguishing system - Painted RAL 9006 Compressed air, prepared on site, must be supplied to the unit for cleaning (connection via NW7 coupling / 6 bar). A water pipe, provided on site, must be connected to the unit for the fire extinguishing system (connection via ½" union fitting, min. 0.5 bar). Technical data dust extractor: - Suction nozzle diameter: 355 mm - Residual dust content: < 0.1 mg/m³ (H3) - Filter area: 26 m² - Cleaning: Jet-pulse automatic with runtime addition (offline) - Volume flow: 10,000 m³/h - Standard application design nominal volume flow: 7,130 m³/h at 20 m/s at suction nozzle - Negative pressure: 3,000 Pa at suction nozzle at nominal volume flow - Sound pressure level: 72 dB(A) at 1 m away from the unit - Motor power: 15.0 kW - Motor data: 400 V / 50 Hz / 3000 min⁻¹ / IP54 - Dimensions (L x W x H): 3,500 x 900 x 2,400 mm - Weight: 1,020 kg SPÄNEX Briquetting Press Type SHB 70 RS Price: €15,000.00 Transport pipe 110 x 3.2 mm for SHB 70 RS Machine number briquetting press: 2570/2018 Intermediate hopper 1.2 m³ for attachment to the SMU 100 dust extractor, integrated rotary discharger with gear motor, opening for connection to a briquetting press or rotary valve, galvanized finish for stepless adjustment of fan performance to actual demand via variable adjustment of fan drive speed. The frequency converter increases system effectiveness, saves energy, and reduces wear on material and machinery. - Motor power: 15 kW Bwjdpfeyfp Srex Aaqsh - Integrated PID controller - Automatic energy optimization for maximum motor efficiency, even in partial load range - Integrated manual/automatic switch-over - Startup menu for quick parameterization - Integrated RFI filter according to EN 55011 - 1 B - Synchronization with already running motor - Device design: IP 55 1 pressure gauge for controlling the frequency converter and thus the power consumption depending on the open machine dampers, including connection hose to the pipework Dust extractor SMU control expansion kit BA, 1 pc, consisting of: - Slide valve control for up to 16 machines - 14 current coils - Multi-tone horn with beacon Rotary paddle bulk goods level indicator, 1 pc, in the intermediate hopper of the dust extractor, ATEX II ½ Ex tD A20/21 marking, to indicate maximum fill level and control a conveying system (system-specific) Storage location: Supplier

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used CNC from business closure. SCM Tech Z 5 - year: 2017 - 5-axis - drilling head - immediately available Bwodpfxsx Tcv Is Aaqoh

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, filter area: 39 m², total height: 2,816 mm, total width: 1,367 mm, total length: 3,999 mm, volume flow: 7,880 m³/h, overall weight: 1,550 kg, input voltage: 400 V, compressed air connection: 5 bar, power: 11 kW (14.96 HP), input frequency: 50 Hz, * Mobile dust extractor – High-quality extraction technology for flexible applications • Mobile, robust dust extraction system Suitable for indoor and outdoor use – ideal for workshops, construction sites, and temporary production areas. • Particularly stable and high-quality construction Larger dimensions than standard devices – designed for long-lasting, professional continuous use. • Unique selling point: Mechanical-pneumatic filter cleaning ✓ Most efficient cleaning method on the market ✓ Low-maintenance, compressed air-operated without electronics ✓ Lowest energy consumption compared to conventional systems • Compact, sophisticated design Allows easy connection to: o Briquetting presses o Decoupling locks Bwedowku Iqopfx Aaqjh o Containers or conveyor systems • Plug-and-play delivery No installation required – ready for immediate use • Suitable for various materials Wood, plastic, mixed dusts, and much more