Spiral drawing-in machine

Renz DPS

Condition: used, Year of construction: 1979, Machine/vehicle number: 4015, Spiraleindrehmaschine - Spiral insertion machine Renz DPSTYear 1979 - Serial-No. 4015 Online-Video-Inspection by Skype-Video B98Ujfh92U We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Condition: good (used), Renz DTP 340M Perforator Machine in very good condition, ready for production. Electric perforation device for a closed, screwed or plastic spine spiral by the German company RENZ: • Device for perforating paper, cardboard or PVC with a working width of 340 mm, activated by a foot pedal • Perforation of up to 35 sheets in one cycle (depending on the module) • Quick and easy replacement of strips • possibility of equipping with strips with square, round and oval holes of various sizes • Possibility of using strips with a recess for a hanger • All perforation strips for a closed spiral are standardly equipped with the option of individual needle shut-off without the need to remove the strip from the device • Possibility of connecting the manual WBS 360 clamping module to the device Technical parameters: Max. length of perforated material: 340 mm Max. thickness of perforated material: 3.5 mm (up to 35 sheets) Dimensions: 36 x 49 x 25 cm Power supply: 230 V / 50 Hz Net weight: 40 kg Cxy8Hxloa0 Pitch: 2:1, 3:1 (depending on the type of strip installed) The set includes a tool with a hole Fi= 6mm, 2:1.

Condition: excellent (used), Year of construction: 2006, connection voltage 230 Volt weight 7,2 kg Spiral diameter 6-20 mm Electric spiralizing machine with manual cutting and bending unit. Dpnx2Z Only suitable for plastic spirals!

Year of construction: 1991, Condition: used, Standard equipment Efnhghjv

Condition: used, Year of construction: 2011, Machine/vehicle number: 4, Elektrische Hochleistungs-Schneidemaschine / High Speed Wire Cutting Machine RENZ HSC-EBaujahr / Year 12/2011 - Serial-No. 460007150.50107 Schneideleistung bis / Cutting capacity max. 3000 Stueck/h Schneidelaenge 3 - 99 Schlaufen, variabel einstellbar Cutting length 3 – 99 loops, variable adjustable Stueckzahlzaehler ja / Piece counter yes Verarbeitbare Durchmesser / Possible wire diameters 3/16" - 1 1/4" ( 5,5 - 32 mm ) Teilung / Pitch 2:1, 3:1, 4:1 Umruestzeit von Durchmesser zu Durchmesser / Time required for diameter change 2 - 10 Min. Spannung Power supply / 230 V / 50 Hz Masse / Machine L110 x W82 x H100 cm Gewicht / Weight gross 74kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bugleske Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Condition: used, Functionality: fully functional, Machine/vehicle number: 3939, Working width: 500 mm, For sale from Norderstedt site due to closure of business compact, easy to set up and operate Wire-O closing machine Dpbv99 incl. 2 tools

Condition: used, Year of construction: 1999, High-performance Wire-O coil cutter from Renz Adjustable number of loops Bttq8Wq0 Adjustable speed incl. various guide rails for the most common Wire-o diameters 5/8 , 7/8 , 3/4 , 3/16 etc. ..... + transport gears 2:1 and 3:1 Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: good (used), Renz ECL 360 wire closer The device is in perfect condition, ready for production. Dprpwp Electric spiral closer ECL 360: Electric crimping via foot pedal Binding up to 34 mm (340 sheets) in one cycle Efficiency approx. 400 cycles/h depending on the type and format of the material Foot cycle start allows you to set the material with both hands Screws with a diameter of 3/16” – 1 1/2” regardless of the pitch Quick settings of different spiral diameters in a few seconds Quiet operation. The device does not require the use of a compressor Weight 30 kg Power supply 230 V

Condition: good (used), Year of construction: 2014, Functionality: fully functional, Renz calendar line Max. Format 750mm Do7Cz9 Details on request

Condition: good (used), Machine/vehicle number: 2004, Renz HB 2000 Binding machine for plastic effect binding; Spiral; Wire O Bnvrt8Ui

Condition: used, Year of construction: 1967, Machine/vehicle number: 3659, Kalenderstanze - Calender Punch Machine Renz Super 520Year 1967 - Serial-No. 3659 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test 2Ucysu

Condition: like new (used), WP 300 -Processable wirepacks WP1 - WP9 3/16" - 1" -Dimensions L 540 mm, D 400 mm, H 300 mm -Weight 30 kg -230V power connection -Instructions ECL 360 Doscmz -max. closing width 360 mm -approx. 400 closing operations/h -for wire comb elements 3/16" to 1 1/2" -Dimensions W 520 mm x L 530 mm x H 230 mm -Weight 38 kg -230 V power connection -Instructions -Machines are coupled -Operation via foot switch - The machines are also sold individually

Year of construction: 1995, Condition: used, RSB 360: Ynsfc Semi Automatic SU 700: Standart Machine Punch dies available: 3:1, 2:1 ring wire, calendar, coil, plastic comb, tear-off perforation

Condition: good (used), Renz AP 300 Compact automatic perforator The device is in very good condition. Year of production 2020. 3:1 perforation tool included Dprajb Manufacturer’s description: Perforation device with a working width of up to 300 mm The device is designed for continuous operation and high loads The unique „Two-finger” system ensures perfect reception of sheets of various weights Capacious feeder and output tray (up to 700 mm) Quick replacement of strips, possibility of using strips with deactivation of selected needles without having to unscrew the strip Mobile device (on wheels) A spacious waste container that slides out from the front Possibility of using strips with/without a recess for the hanger. Quick format change by turning off selected needles without having to remove the strip Power supply 230V Weight 380kg

Year of construction: 1961, Condition: good (used), Perforating machine. Chr. RENZ super 520, 1961. Cvhi0Kafs9 It comes with 3 tools

Condition: used, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock B98Zd00Hx2 Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Condition: good (used), Renz CLE 70 Wire closer The device is in very good condition, ready for production. CLE 70 electric spiral crimping device: Electric crimping via foot pedal Binding up to 34 mm (340 sheets) in one cycle Efficiency approx. 400 cycles/h depending on the type and format of the material Foot-operated cycle start allows you to position the material with both hands Supports spirals with a diameter of 3/16” – 1 1/2” regardless of pitch Quick settings of various spiral diameters in a few seconds Cwkvobfxp8 Quiet operation. The device does not require a compressor Weight 75 kg Power supply 380V

Condition: good (used), Renz WP 300 spiral feeder The device is in perfect condition, ready for production. RENZ WP 300 increases work efficiency, saves time and guarantees higher efficiency when binding works. WP 300 automatically feeds the wire from the RENZ WIRE PACK® when you press the foot pedal. Display control for quick automatic configuration Up to 70% faster binding speed. Quality „Made in Germany” Weight 32kg Power supply 230V B0Q0Iavhni

Condition: used, Year of construction: 2020, Pneumatic double press HEROAL ( 2 presses built at an angle ) DPS Machine # 12050011, year of construction 2020 Technical data: Pressure force 8 t Press 1 dimensions Bn7Bcyvmhmh Table size 260 x 180 mm Installation height 140 mm Projection 110 mm Press 2 dimensions Table (round) 160 mm Installation height 140 mm Projection 75 mm External dimensions 540 x 530 x 500 mm With - foot switch - various tools used in very good condition

Condition: new, Year of construction: 2024, Capacity: 300 ton Working Area: 1600 x 2100mm. Stroke Length: 500mm. Installation Height ( Daylight ) : 600mm. Main Motor: 22kw. Main Pump: 87lt. Distance Between Columns: 2100mm. Table Height: 900mm. Closing Height: 100mm. Forward Speed: 9.8 mm./s. Return Speed: 21.5 mm./s. Overall Dimensions: 3300 x 3000 x 3000mm. Total Weight: 16000kg. -- Accessories: Hydraulics: Rexroth Control: Siemens S7-1200 BEIJER 7’’ Screen Carzdtof Control cabinet mounted on the side wall of the bridge Swiveling control panel Pressure adjustable via screen (50 – 300 tons) Speed adjustable via throttle valve Cylinder chrome-plated Remote control (with cable) Stroke length adjustable via distance sensors 400 V 50 HZ 3 phase Rotary safety for cylinder Cylinder movable sideways via drive motor Bridge movable via drive motor Light curtain safety for bridge area (Datalogic) -- 24/7 CUSTOMER SERVICE - from manufacturer to customer

Condition: new, Year of construction: 2024, For sale is a DPS 300 (three-phase oil separator) for the physical separation of water and oil. Areas of application: Parts cleaning systems, coating systems, dip tanks, ultrasonic cleaning systems - wherever oils and greases need to be removed from cleaning systems/processes. Designed for bath volumes up to 3000lt - pump capacity approx. 1000 - 3000l/h Dimensions: 1108x480x480 mm (LxWxH) Ueaccnrlzn

Condition: good (used), Year of construction: 2007, Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cime Careddu Italy, Type: AM DPS 12-12-1C, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2007, with hight adjustment, adjusted to bottle 330ml + 500ml + 750ml, 0,33 +0,50 +0,75 C9U30Icfc

Condition: used, Year of construction: 1960, faceplate diameter: 1400 mm turning diameter over support: 1200 mm turning length: 2000 mm centre distance: 2000 mm turning diameter over bed: 1400 mm center height: über Bett: 710 mm spindle bore: 80 mm revolution per minute: 1,8 - 90 / 18 step U/min feed range: längs: 0,28-2,8 und plan: 0,18-1,8 mm/min tailstock quill taper MT: tailstock travel: mm bed guideways length: mm max. workpiece weight between centres: kg total power requirement: ca. 22 kW weight of the machine ca.: 15,0 t machine dimensions LxWxH: 6,0 x 2,0 x 2,0 m Facing Lathe / Heavy duty 3 bed lathe Bjootexlzw3 Design: Three-track bed with tailstock and headstock Faceplate made of gray cast iron 4-fold steel holder Tailstock with fixed center point Maximum workpiece weight with flying clamping: 2500kg largest workpiece weight between the centers: approx. 8000kg various accessories see photos Floor plates not in delivery scope, because not necessary for that type of machine. i.D.

Year of construction: 2002, Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Make No. 83-10-102 Year of construction 2002 travel X-axis approx. 400 mm travel Z-axis approx. 400 mm tool holding fixture in the mounted rotary table: Ø 50 mm Bolt circle diameter of the tool holders in the mounted rotary table Ø 340 mm inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool mounting plate: Ø 102 mm Rotary flange mounting with centering diameter: Ø 102 mm Rotatable flange support with outer diameter: Ø 155 mm Heqgazvx Rotatable flange support with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool places - interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular matte disks - Matt screen fixed with crosshairs - Axis movement via manual quick adjustment with pneumatic clamp - fine adjustment via hand wheels - rotating rotary table with pneumatic clamping - Metal base with 3 drawers space requirement L x W x H 1100 x 1000 x 800 mm weight 400 kg good condition

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Bogeiu7Ansz