Punches

Renz AP 600

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen – photocells – air table – cutting line – chrome table surface – enlarged side tables – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block Dodpfx Adjw D E Sgeuola – spare knife

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system Djdpfx Adswypp Isuola - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. Dsdpfxetyy Sfs Adusla In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Year of construction: 1972, condition: ready for operation (used), Format: 1000x700mm, an inspection is possible. Dedpfx Aeqzkdqsduela

Condition: excellent (used), Year of construction: 2001, Shinohara 74-4 Straight machine Year 2001 Impressions: 74 million Double impression cylinder Semi-automatic plate change IR drying Powder spray Automatic roller washing Automatic blanket washing Technotrans Dljdpfx Adoxpgq Souja Plate punch and banding unit

Condition: used, functionality: fully functional, fuel type: electric, Year of construction: 2009, machine/vehicle number: 908108, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Djdewh Tq Sopfx Aduela Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Complete with controller Dledpfx Aotq E Rksduoa Year - November 2022 In excellent condition

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,250 kg, Hot Foil Stamping Tiegel / Tiegel Heidelberg GTP Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Dlodpfoxu Uc Hsx Aduea Weight approx. 2250kg Online-Video-Inspection by FaceTime Available Immediately - Can be inspect Can be test

Condition: new, Various inking and dampening rollers for KBA Rapida 142: - no. 374.0101.1 Westland Ink form roller / Farbauftragwalze, Ø 117mm, new (4 pieces) - no. 374.0102.1 Westland Ink form roller / Farbauftragwalze, Ø 123mm, new (2 pieces) - no. 374.0201.1 Westland Ink form roller / Farbauftragwalze, Ø 129mm, new (3 pieces) - no. 374.0202.1 Westland Ink form roller / Farbauftragwalze, Ø 135mm, new (1 piece) - no. 374.0301.2 Westland Ink vibrator roller / Farbheberwalze, Ø 117mm, new (3 pieces) - no. 374.0401.1 Westland Ink distributor roller / Farbreiberwalze, Ø 117mm, new (3 pieces) - no. 374.0402.1 Westland Ink distributor roller / Farbreiberwalze, Ø 123mm, new (4 pieces) - no. 374.0501.1 Westland Ink distributor roller / Farbreiberwalze, Ø 129mm, new (3 pieces) - no. 374.1005.1 Westland Waterform roller / Feuchtauftragwalze, Ø 135mm, new (5 pieces) - no. 374.1199.1 Westland Metering roller / Feuchtdosierwalze, Ø 130mm, new (3 pieces) - no. 90001067 Ebonit Ink distributor roller / Reiberwalze, Ø 80mm, used (2 pieces) Dlsdpfx Adov Ebf Heuoa - no. 90008616 Ebonit Ink distributor roller / Reiberwalze, Ø 102.3mm, used (1 piece) - Rilsan Oscillating roller / Beschwerwalze, Ø 60mm, used (1 piece)

Condition: used, machine/vehicle number: 96102, Baier Geba 45/A, machine number 96102, 2-color foil stamping, plus 1 station for die-cutting, 2 stations for foil stamping, 1 station for die-cutting, working width 14 x 14 cm, automatic feed, in good condition, immediately available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment. Dedpfsv Ukg Ejx Adujla