EVA lamination oven

Pujol Lam Pro

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Max. width: 1.100 / 1.300 / 1.600 mm Glasthickness: 2-28 mm Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW Ijdowd Ertspfx Afajan

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total length: 6,400 mm, overall weight: 850 kg, Schraml Clear 13 Special 4 Working height 580 mm Year: 2007 Iajdpfeu Nw Szsx Afaon Condition : Good used Open Top Washing height 1300 mm Brushes 4 Also available in lines with drilling machine.

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Iajdpfx Aemzbr Sefajn Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Year of construction: 2006, condition: ready for operation (used), Inclination: 7°, compressed air supply: 6.5bar, connected load: 8.5kW, length: 4170mm, width: 2990mm, height: 3330mm, weight: 2.8t, including documentation. Iedpfx Ajibiivefaoan

Year of construction: 1989, condition: used, Grinding and polishing Maximum dimensions of the glass pane: 3000 x 3000 mm, Iedpfx Asnzkwmjfasan Minimum dimensions of the glass pane: 40 x 80 mm, Working height: 820 mm, Dimension: Length: 7300 mm, width: 830 mm, height: 2730 mm. Weight: 3650 kg.

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: Iedemb U E Aopfx Afasan - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg Isdpotwphwefx Afajan With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 27,300 mm, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, CNC Vertical Edge Processing Center Iasdpfov Hprqox Afaon with Integrated Single-Sided Drilling and Milling Function LiSEC, KBF-60/33 Right – Left, Year: 2016 Automatic washing and drying machine for flat glass included 400 V, 50 Hz In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: used, Year of construction: 2005, Multifunction centre for machining glass, INTERMAC Type Master 23, year 2005 (1700 operating hours) Iaodpfox Iuhrjx Afaon

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 500 mm z-travel 400 mm spindle taper ISO SK 40 spindle speed: 20-8000 1/min rapid travel x/y/z 25.000 mm/min feed range 1-5000 mm/min Size of table plate 1000 x 500 mm tool change unit 20 Control Heidenhain TNC 530 Number of working hours 25754 h table load 400 kg workpiece length 300 mm Iaodpfjyatyiox Afasn total power requirement 7,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 2,3 x 2,6 x 2,56 m WEMAS VZ 750 machining centre, 3 axes, 4th axis prepared Good condition, few operating hours, only samples and prototypes, mainly aluminium. Control system 30,397 hours Machine 25,754 hours Programme run 8,683 hours control: iTNC 530 ; NC Software 340 420 - xx, updated 2021 Everything goes with you! Vice, tool holder, tools, milling cutters and much more.