Performed with multiple cross. Before
MS- Maschinenbau
MAS
Performed with multiple cross. Before
MS- Maschinenbau
MAS
Year of construction
2021
Type of offer
New machine
Location
Goldbinnen 13, 31840 Hessisch Oldendorf, Deutschland
MACHINE DATA
- Machine type:
- Performed with multiple cross. Before
- Manufacturer:
- MS- Maschinenbau
- Model:
- MAS
- Year of construction:
- 2021
- Condition:
- new
PRICE AND LOCATION
LISTING DETAILS
- Listing ID:
- A627-369
- Reference number:
- MAS
- Update:
- 20.12.2021
DESCRIPTION
max. cutting length 3.000-8.000 mm
min. cutting length 500 mm
max. cutting height 80 - 140 mm
stepless feed 10-30 m/min.
Sijcjtxj
saw motor power 4,0 - 7,5 kW
feed motor 1.5 kW
number of saw supports 2 - 6
weight 1.000 - 2.500 kg
The advertisement was translated automatically. Translation errors are possible.
min. cutting length 500 mm
max. cutting height 80 - 140 mm
stepless feed 10-30 m/min.
Sijcjtxj
saw motor power 4,0 - 7,5 kW
feed motor 1.5 kW
number of saw supports 2 - 6
weight 1.000 - 2.500 kg
The advertisement was translated automatically. Translation errors are possible.
SELLER
MS-Maschinenbau-u.Vertriebs GmbH
Contact person: Herr Ulrich Schmitz
Goldbinnen 13
31840 Hess.Oldendorf, Germany
Verkauf und Herstellung von neuen und gebr. Sägewerksmaschinen
Send inquiry
TELEPHONE & FAX
Telephone:
+49 5152 6979694
Fax: +495152962399
These listings may also fit your interest.
2
- 200mm cutting height
- 750mm cutting width
- 5-30m/min steppless feed
- 90 KW Sawing Motor
- 3KW Feed gearbox
- 75mm Sawarbor
Tjz00j8is
3
max. cutting height 160 mm
max. cutting width 600 mm
min./max. trimming width 25-300 mm
adjustment times of the widths 0,2-1,0 sec.
feed rate 5-30 (70) m/min.
sawing motor 37 kW (also more kW possible)
feed motor 2,2 kW
saw shaft diameter 70 mm
weight 3.500 kg
Basic equipment
1 adjusting bush
1 fixed bush
Digital cutting width display
Automatic cutting width adjustment
Optional equipment
Electric height adjustment of the feed rollers
Laser with adjustment device
Driven roller gear
Electronic bra...
5
Hessisch Oldendorf

2022
new
- 150 mm infeed high
- 430 mm infeed width
- 30 mm chips
- 2 knives
- 440mm diameter Rotor
- 590 U/min Rotor
- 30 m/min Feed speed
- 37 KW Mainmotor
- 3 KW + 2,2 KW infeed roller Gearboxes
Blaiook7lh
- 6.000 mm conveyor belt
- 2.000 mm discharge conveyor belt
The plant is available immediately !
- suitable for log diameters from 10 cm up to 50 cm
- suitable for 2 - 6 m log length
- 4-strand infeed conveyor 6 m long
- 4 - strand separator 2 m long
- 4 - strand separator 2 m long
- Conveyor with pin conveyor chain M 112 with gentle rollers
- block conveyor with 2 inch chain and flights
- Special carrier for low-noise transport
- Measurement with 1 mm resolution
- Measuring frame with additional heating and sunshield
- Display of all operating states o...
5
Machine is available immediately
- 2.5 - 6 m Cutting length
- 120 - 450 mm max. cutting height
- 80 -250 mm cutting width
B7xl0tal9w
- infeed table with centering rollers
- infeed table with log turning device
- saw with 6 - fold width adjustment
- draw-out bridge with 2 driven draw-out rollers
- Pull-out bridge with 5 pairs of pressure rollers
- 650 mm saw blade diameter
- 2 x 55 KW saw motors below
- 2 x 55 KW saw motors above
- 6 saw cuts
- 4 KW SEW feed gear motor
- 5- 30 m/min stepless fe...
6
- 260 mm cutting height
- 750 mm cutting width
- 5-30 m/min stepless feed
- 2x75 sawing motors
- 3 KW feed gearbox
Sjlwd7m
- 70 mm soindle diameter
- 400 mm sawblade diameter
- 5000 Kg weight
2
Log cross conveyor
- Number of chain strands according to customer specifications
- length and width according to customer specifications
B3khwz70ob
- powerful SEW gear motors
- solid pin conveyor chain with gentle rollers
3
max. cutting height 200 mm
max. cutting width 400 mm
Brtocxq
max. passage width 490 mm
feed rate 5-30 m/min.
sawing motors 2x 37 kW ( also more KW possible )
feed motor 2,2 kW
saw shaft diameter 70 mm
saw blade diameter 325 mm
weight 2.800 kg
Basic equipment
Electrical height adjustment of the upper rollers
Special equipment
Laser with adjustment device
Driven roller gear
Electronic braking device
5
2.5 - 6 m Cutting length
Btrdzqheqy
- 120 - 450 mm max. cutting height
- 80 -250 mm cutting width
- infeed table with centering rollers
- infeed table with log turning device
- saw with 6 - fold width adjustment
- draw-out bridge with 2 driven draw-out rollers
- Pull-out bridge with 5 pairs of pressure rollers
- 650 mm saw blade diameter
- 2 x 37 KW saw motors below
- 2 x 30 KW saw motors above
- 6 saw cuts
- 4 KW SEW feed gear motor
- 5- 30 m/min stepless feed speed
3
- 340 mm Cutting height
- 70-250 mm max. cutting width
- 500 mm passage width
- 6000 mm step length
- 3-20 m/min feed speed
B2vmwv2lt8
- 2 x 30 KW saw motors
- 1,1 KW feed motor
- 0,25 KW width adjustment motor
- 1300 Kg weight
4
- 350 mm max. cutting height
- 75-250 mm min/max Cutting width
- 100 - 350 mm min/max logs
- 18-80 mm side board
- 1,8 - 6m Cutting length
B2vmrkgglm
- 550 mm saw blade diameter
- 4/6 saw cuts simultaneously
- 5-30 m/min variable feed speed
- 2x30 KW and 2x22 KW saw motors
- 3 KW SEW feed gear motor
- automatic 6-fold width adjustment
- infeed table with 3 fold turning device
- 2 centering roller pairs pneumatic pressure
- driven infeed roller with 0,75 KW and pneumatic pressure
- 2 driven outfe...
3
- 340 mm Cutting height
- 70-250 mm max. cutting width
- 500 mm passage width
- 6000 mm cutting length
Iygq97
- 3-20 m/min
- 2 x 18,5 KW sawing motor
- 1,1 KW feed motor
- 0,25 KW width adjustment motor
- 1300 Kg weight
3
max. cutting height - ø 340 mm
min./max. cutting width 80 - 250 mm
min./max. side board 18 - 80 mm
max. cutting length 6.000 mm
feed rate 5 - 30 m/min.
sawing motor 2 x 55 kW
feed motor 4,0 kW
width adjustment motor 0,55 kW
infeed roller motor 0,75 kW
weight 8,000
Optional equipment
Laser adjustment
Infeed table extension up to 8.000 mm
Automatic width adjustment with 6 fixed dimensions
Equipment with 1.000 mm dia. blades
Cyioni
Motorized log turning device
Electronic braking device
2
- 8000 mm standad length
- 800 mm roller width
Ylmdsnx
- 1,5 KW Gearbox rollerconveyor
- 0,75 KW Gearbox cross transport
3
- 10000 mm standard length
- 800 mm standard rooler width
N00t809ix
- 2,2 KW gearbox roller conveyor
- 0,75 KW gearbox infeed roller
4
- debarker with 3/3 feed rollers
- infeed and centering table
- min log diameter 100 mm
- max log diameter 600 mm
- min log length 2.000 mm
- 30 m/min feed speed
- 5 pcs. changeable carbide knives
- 37 KW Main Motor
- 9,2 KW Gearbox inffed and centering table
Z02oveg
- 5,5 + 7,5 KW Gearbox feed rollers
- 9.000 Kg weight
2
max. cutting height 160 mm
max. cutting width 600 mm
feed rate 5-30 m/min.
sawing motor 37 KW (also more KW possible)
feed motor 2,2 kW
max. saw blade insert at 145 mm 6
saw shaft diameter 70 mm
Qbyws8lk
weight 3.200 kg
Special equipment
Electrical height adjustment of the infeed rollers
Laser with adjustment device
Driven roller gear
Electronic braking device
5
- 50 mm cutting height
- 1210 mm cutting width
- 12 driven rollers
- 10 - 30 m/min variable feed rate
- 37 KW Sawing Motor (more is possible)
- 2,2 KW Feed Gearbox
C2rudipgg
- 70 mm Sawing spindle
- 225 mm Circular Saws
- 4000 Kg weight of the machine
4
- 160 mm cutting height
- 750 mm cutting width
- 5-50 (100) m/min steppless feed
N00eo70xd
- 37-110 KW sawing motor
- 75mm spindle diameter
- 2 movable saw bushes
4
Schwanau, Germany

(dealership location)
2019
used
Persons Basket
Nsqhl
Capacity: 300kg
Load Centre: 400
Overall Length: 800mm
Overall width: 1200mm
Overall weight: 125kg
YOM: 2019
Condition: very good
Description: Der Arbeitskorb bietet Sicherheit bei Reparatur- und Wartungsarbeiten an hochgelegenen Gebäudeteilen. Mit Steckbolzensicherung gegen Abrutschen von den Lastgabeln. Euínfahrtaschen 620 x 180 x 90 mm
11
Via Sestriere, 23/30, 10060 Candiolo TO, Italia

1998
excellent (used)
Automatic and semi-automatic line for pallet levelling with loading and unloading, without operator!
Bzbjetam
Emskirchen, Germany

(dealership location)
1990
used
Ablader - Sheet Pile Stacker Schneider Maschinenbau AG 1058Year 1990 - Serial-No. 633-1217-Online-Video-Inspection by Skype-Video-
B982cnrfgn
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
5
Wiefelstede, Germany

(dealership location)
used
Turning unit, turning device, turning table, conveyor belt, container turning device, welding turning device, welding device
-Drive motor: 0.15/0.60 kW
-Speed: 15/64 rpm
-sealed: slewing ring
Lr9up
-Device is: pneumatically tiltable
-Dimensions: 2520/800/H380 mm
-Weight: 524 kg
2
Tilburg, Netherlands

(dealership location)
1994
used
Year of construction: 1994 Including cutting unit tissuebox
B37pzbryzh
4
Krauchenwies

2019
as good as new (ex-display)
Technical description:
Center width 1200 mm
Kjg9pla
Center height 1100 mm
Center height above machine bed 215 mm
Max. Machining Ø 430 mm
Max. machining Machining Ø above support 215 mm
Tailstock with quill adjustment
quill taper MK2
4 spindle speeds 500-1000-2000-2800 min/1
Wescott drill chuck max. Ø 20mm
motor power 400V /50Hz 1,1 kW
space requirement LxWxH 2500x1500x1225mm
weight approx. 400 kg
Painting light grey/graphite grey 7035/7024
Extensive accessories included in the total price
2
Grenzach-Wyhlen, Germany

(dealership location)
1992
used
measuring range X-axis 360 mm
measuring range Y-axis 210 mm
Table dimensions 800 x 800 mm
voltage 220 V / 50 Hz
total connected load 0,3 kW
weight 0,5 t
dimensions of the machine ca. 1,5 x 1 x 1,6 m
Tool presetter with taper SK 30, SK 40, SK 50 VDI 20-60
M7yzd2
3
Oberwagram

2021
refurbished (used)
Pelletizing plant for various materials such as wood, miscantus, agricultural by-products and waste products (hay, straw, corn straw ....) Feed .....
This is a complete plant (compact plant), which is built on a base frame, and is composed of the following components:
Storage tank for raw material 4 m³, incl. agitator.
Inclined mixer for raw material incl. level sensors and fully automatic moisture metering system
Dosing tank for pressing additives (e.g. corn starch)
Dosing screw for optimal mat...
6
Leipzig, Germany

(dealership location)
2014
used
Punching capacity: 500 kN
cutting capacity : 9,0 t
control:
control: CNC KOCH automation
ram adjustment: 80 mm
stroke of ram - fixed: 170 mm
no. of strokes: 20 - 120 Hub/min
distance between columns: 1140 mm
dayligth: 350 - 430 mm
column travel -side: 315 mm
table surface area: L x B 1100 x 400 mm
ram surface area: L x B 1100 x 400 mm
passage opening in table: 950 x 100 mm
table height over floor: 1100 mm
column travel -side: 315 mm
drive AC: 230 VAC/24 VDC kW
operating pressure: 6 bar
total p...
6
Ahaus

1989
excellent (used)
BBM hydraulic guillotine shear type TS-H 3050-16
working width 3050 mm
Oedxxjvb
max sheet thickness 16 mm
motorized backgauge
support arms
6
Offer a brush washing machine and polishing machine.
Dj2h2y0f
Was used for washing pumpkins. But can be used for all crops. Potatoes, beet, sweet potatoes, tuber celery, etc.
Brush length 3m
In line with a dryer and polisher with fine brushes and blow-off device
ink. Washing water treatment on rollers under the washer.
inc. Control with own speed regulation by frequency converter.
Machines were used 2 summers.
more info on O176 83O5 8O84 Gladly on WhatsApp
4
Leipzig, Germany

(dealership location)
1999
used
7
Ratingen

2002
good (used)
Quotation for second-hand machine
Illig form-, filling- and sealing machine FS 31, machine number: 186, WE 971
Basic machine with the following additional equipment:
- NC equipment Siemens S7, with OP 17 operator panel
- 2-up roll stand for container material including cutting and
splicing device
- automatic joint identification of container material
- separately moved 1 zone contact heater
- male vacuum forming device
- plug assist with pneumatic drive reinforced
- multi-gripper material...
15
Mörsdorf

1998
excellent (used)
Controlled circular welding turning device Fabr. PH Maschinenbau Type SO-PH-II-D250
Machine # AT98H423-D056 Year of manufacture 1998
Technical data:
Center height 700 mm
swivel diameter 1400 mm
max. part length 800 mm
diameter of the support plate 125 mm
Qjghz
bed width 330 mm
outer dimensions approx. 2200 x 1400 x 1600 mm
with
- Siemens control TD 200
- 2 receptacles for welding torches
- two-hand release
- infinitely variable turning speed
used, in good condition
shaft length: max. 30 mm
capacity: 600 ST/min
wire diameter max.: 5 mm
working dimensions: 30 mm
dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m
dimensions of machine: 2,95x1,5x2,15 m
dimensions of coil: 1,15x1,15x1,15 m
Orbital Cold Forming Machine! - Not not suitable for screw production!!!!!
- mechanic cold flow press / machine is unused!!!!
- Steel core bullets
- Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing sem...
5
8
Used machine in good condition.
Year of manufacture 2013
Car7fkshvr
Price: 8900 € plus VAT.
2
Oberkochen, Germany

(dealership location)
used
working length 3200 mm
Working width 1250 mm
S79mo9xk
Working height ca. 900 mm
used mechanization, consisting of:
- driven infeed belt length 6500 mm, width 200mm
- Push-off device (automatic push-off of the logs from the infeed conveyor onto
the
planing table of the machine)
- Longitudinal-transverse-longitudinal conveyor after the machine (to return
the parts to the
Operator. Length 3200 mm, width outside 1520 mm, inside 1250 mm.
- 2 powered return belts length 3000 mm, width 200 mm
and ...
10
Ratingen

1988
ready for operation (used)
Quotation for second-hand machine
Illig vacuum forming machine RV 53, # 250, 1988
Basic machine with following additional equipment:
- material roll stand for 1200 mm diameter
- lower heater with cross-row control incl. material sag control
- heating for steel rule die
- stacking station with counting and push-out device
Bt2lcbnfk3
Year of construction: 1988
Condition: ready for operation
Price: on request, ex works, subject to prior sale
6
Hessisch Lichtenau, Germany

(dealership location)
1990
used
High-speed radial drilling machine HKS Maschinenbau Type HKS 26 MG
Rapid Radial Drilling Machine
machine No. 26 2115 Year of construction 1990
drilling capacity 26 mm
Spindle cone MK 3 - short quill
Pinol stroke 145 mm
Throat max. 1030 mm
Projection min. 205 mm
table size 1200 x 750 mm
Clamping surface 1060 x 610 mm
Column diameter 145 mm
Spindle speed 40 - 2010 rpm infinitely variable
Feed 0.04 - 0.05 - 0.063 - 0.08 - 0.1 - 0.125 - 0.16 - 0.2 - 0.25 - 0.315 - 0.36 mm/rev
distance from spindle t...
6
workpiece diameter: 5000 mm
load capacity: 4 x 30 t
Dyb2plhte
total power requirement: kW
dimensions L x W x H: 3,2 x 1,9 x 1,0 getrieben m
dimensions L x W x H: 3,3 x 1,28x 1,0 je mitlaufend m
dimensions electric cabinet LxWxH: 0,9 x 0,4 x 2,3 m
total wight: ca. 8,7 t
For turning large round containers/objects. (welding positioner)
Consists of a welded steel construction.
-1 driven bracket headstock; motor-driven adjustment approx. 1400mm, axis distance min./max.: 800/2200mm; impeller size Ø 5...
6
Capacity: 3 t/h
Rotation per minute of the motor: 1450 1/min
Power consumption: 7,5 kW motor capacity
equipment: 6 roller
Dplcilf
accessories: grist case, grist transport
6
used press of the company Oevermann, machine-no. 5186,
power: 7,5 KW, commission-no. 7905276, safety distance: 20 cm,
overrun time: 120 ms
Hoy0gru0k
8
Pod Gradom 1, 2380 Slovenj Gradec, Slovenia

2011
good condition (used)
Type : Rotary table r=14m, with 16 segments, each segments with one double carrier or two single carriers
Manufacturer : Krauss Maffei
Date of line start ( Manf acture Year)Year): upgraded 2011
Number of M ixing H eads (robots)/components : 1*4
PLC ( programmable logic controllers ): Siemens
HMI (Human machine interface ): Intouch
Release spray equipment : Manual application antistatic spray gun Nanogun
Wetside supplier Mixing Head ): Krauss Maffei
Mixing Head Type : MK 18/22 ULP 4CN G
Chemistr...
9
Ratingen

1995
ready for operation (used)
Illig vacuum forming machine, type UA 150/4 g P,
basic machine with following additional equipment:
- plug assist with remote control, digital setting of speed and automatic clamping of plug;
- one additional socket for temperature control units or chiller, main switch reinforced;
- 8-up reinforced cooling blowers;
- 8-up spray nozzle equipment;
- colour screen VDU operating panel;
B7eita8vqx
- including 6-position switching for upper heater and 4-position switching for lower heater, storage ...
15
Mobile bagging system
Caib02ptlp
Manufacturer: Anlagen + Maschinenbau Günther
Typ: HN 200-4
Year of construction: 1991
The facility does not have a scale
Possible bag sizes: 30, 40, 50 liters
The filling quantity is adjusted by adjusting the conveyor belt
Bags are sealed by hand
Packing the sacks onto pallets by hand
So far, compost has been bagged with the machine
but horn shavings and topsoil have also been bagged with it.
Purchase price on request.
Purchase price net plus statutory VAT.
S...
13
Twin MEM in good condition
Electrical power: 2x37 kW
Number of drive belts: 2x4
Centralized lubrication
Cah9kmselb
Flywheel diameter: 1,200 mm
Ruffles width: 140 mm
Thickness of the upper steering wheel: 15 mm
Thickness of the lower steering wheel: 20 mm
Flywheel tension: hydraulic
Type of guides: pressure
Roller guide on the right - Double hydraulic trainers on the left
Blade: 7.830 mm x 160 mm x 1.2 mm in CP45
Central chain length: 6,000 mm
Maximum passage height: 600mm
Opening between blade: ...