metallographic abrasive cutting machine
METKON
Metacut 302
metallographic abrasive cutting machine
METKON
Metacut 302
Year of construction
2021
Condition
New machine
metallographic abrasive cutting machine
METKON Metacut 302
MACHINE DATA
- Machine type:
- metallographic abrasive cutting machine
- Manufacturer:
- METKON
- Model:
- Metacut 302
- Year of construction:
- 2021
- Condition:
- new
- Operating hours:
- 1
PRICE & LOCATION
LISTING DETAILS
- Listing ID:
- A787-883
- Reference number:
- MTC 302
- Update:
- 18.04.2022
DESCRIPTION
The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine.
The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces.
After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently.
Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet)
0k2cdl
Delivery including a test equipment consumables consisting of:
* Assortment of 20 cutting discs
* 5 litres METCOOL coolant
Option: Machine base cabinet
The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces.
After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently.
Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet)
0k2cdl
Delivery including a test equipment consumables consisting of:
* Assortment of 20 cutting discs
* 5 litres METCOOL coolant
Option: Machine base cabinet
DOCUMENTS
787883.pdf (PDF)SELLER
SCHÜTZ+LICHT Prüftechnik
Contact person: Herr Wolfram Schütz
Albert-Einstein-Str 9d
40764 Langenfeld, Germany
Registered since: 2008
Das Unternehmen befasst sich mit dem Vertrieb, der Modernisierung, dem Service und der DAkkS-Kalibrierung von Werkstoffprüfmaschinen / Materialprüfmaschinen (neu und gebraucht) für die mechanische, zerstörendende Werkstoffprüfung.
Wir sind in Deutschland führender Anbieter und Lieferant für:
* GALDABINI Universalprüfmaschinen (Zugprüfmaschine / Reißmaschine / Biegeprüfmaschine / Druckprüfmaschine) auch als Materialprüfmaschine / Werkstoffprüfmaschine bezeichnet für Zugversuch, Druckversuch, 3-Punkt-Biegeversuch ISO178 u. a. / Bauteilprüfung
* INNOVATEST Härteprüfer / Härteprüfmaschinen / Härteprüfgeräten für die Härteprüfung nach Vickers, Brinell und Rockwell
* GALDABINI Pendelschlagwerk für Kerbschlagbiegeversuche und einzigartige Kerbräummaschine für Kerbschlagbiegeproben
* METKON Metallographie – Ausstattung: Trennmaschine / Trennschleifmaschine / Nasstrennschleifmaschine | Schleif- und Poliermaschine | Einbettpresse | Spektralanalyse – Schleifmaschine / Fräse
* SCHÜTZ+LICHT Stanzen / Schneidpressen für Zugproben aus Blechen / einzigartige Probenschleifmaschine für Flachzugproben aus Blech
* EUROMEX - Mikroskope für Standard-Messaufgaben (Makro-Mikroskope), Schweißnahtprüfung, Gefügeanalyse in der Metallografie
* Dehnungsmesser / Extensometer für Zugversuche – gem. ISO6892 / ISO 527 u. a.
* Spannzeuge für Universalprüfmaschinen / Zugprüfmaschinen
Wir sind in Deutschland führender Anbieter und Lieferant für:
* GALDABINI Universalprüfmaschinen (Zugprüfmaschine / Reißmaschine / Biegeprüfmaschine / Druckprüfmaschine) auch als Materialprüfmaschine / Werkstoffprüfmaschine bezeichnet für Zugversuch, Druckversuch, 3-Punkt-Biegeversuch ISO178 u. a. / Bauteilprüfung
* INNOVATEST Härteprüfer / Härteprüfmaschinen / Härteprüfgeräten für die Härteprüfung nach Vickers, Brinell und Rockwell
* GALDABINI Pendelschlagwerk für Kerbschlagbiegeversuche und einzigartige Kerbräummaschine für Kerbschlagbiegeproben
* METKON Metallographie – Ausstattung: Trennmaschine / Trennschleifmaschine / Nasstrennschleifmaschine | Schleif- und Poliermaschine | Einbettpresse | Spektralanalyse – Schleifmaschine / Fräse
* SCHÜTZ+LICHT Stanzen / Schneidpressen für Zugproben aus Blechen / einzigartige Probenschleifmaschine für Flachzugproben aus Blech
* EUROMEX - Mikroskope für Standard-Messaufgaben (Makro-Mikroskope), Schweißnahtprüfung, Gefügeanalyse in der Metallografie
* Dehnungsmesser / Extensometer für Zugversuche – gem. ISO6892 / ISO 527 u. a.
* Spannzeuge für Universalprüfmaschinen / Zugprüfmaschinen
Weitere rechtliche Angaben
Verantwortlich für den Inhalt der Website
SCHÜTZ+LICHT Prüftechnik GmbH
Albert-Einstein-Str. 9d - 40764 Langenfeld
(Im Wendehammer geradeaus: 1 Halle rechte Seite)
Fon: +49 2173 / 91 93 9 - 0
Fax: +49 2173 / 91 93 9 26
Geschäftsführung
Wolfram Schütz
Rudenz Licht
Registergericht
Düsseldorf - HRB 45906
Bankverbindung
Disclaimer
Alle Angaben unseres Internetangebotes wurden sorgfältig geprüft.
Wir bemühen uns, dieses Informationsangebot stetig zu erweitern und zu aktualisieren. Eine Garantie für die Vollständigkeit, Richtigkeit und letzte Aktualität kann nicht übernommen werden. Die SCHÜTZ+LICHT Prüftechnik GmbH kann diese Website nach eigenem Ermessen jederzeit ohne Ankündigung ganz oder teilweise verändern und / oder deren Betrieb einstellen und ist nicht dazu verpflichtet Inhalte dieser Website zu aktualisieren.
Hyperlinks zu den Websites Dritter stellen keine Zustimmung zu deren Inhalten seitens der SCHÜTZ+LICHT Prüftechnik GmbH dar und die SCHÜTZ+LICHT Prüftechnik GmbH ist nicht verantwortlich für die Verfügbarkeit oder den Inhalt dieser Websites.
Das Herstellen einer Verbindung zu diesen Websites geschieht auf eigene Gefahr des Benutzers.
Jegliche in Verbindung mit der Website oder deren Benutzung auftretenden Rechtsansprüche oder Prozesse unterliegen der Auslegung der Gesetze der Bundesrepublik Deutschland, mit Ausnahme der Regelungen des Internationalen Privatrechts. Diese Internetseite enthält bestimmte in die Zukunft gerichtete Aussagen, die auf den gegenwärtigen Annahmen und Prognosen der Unternehmensleitung beruhen.
SCHÜTZ+LICHT Prüftechnik GmbH
Albert-Einstein-Str. 9d - 40764 Langenfeld
(Im Wendehammer geradeaus: 1 Halle rechte Seite)
Fon: +49 2173 / 91 93 9 - 0
Fax: +49 2173 / 91 93 9 26
Geschäftsführung
Wolfram Schütz
Rudenz Licht
Registergericht
Düsseldorf - HRB 45906
Bankverbindung
Disclaimer
Alle Angaben unseres Internetangebotes wurden sorgfältig geprüft.
Wir bemühen uns, dieses Informationsangebot stetig zu erweitern und zu aktualisieren. Eine Garantie für die Vollständigkeit, Richtigkeit und letzte Aktualität kann nicht übernommen werden. Die SCHÜTZ+LICHT Prüftechnik GmbH kann diese Website nach eigenem Ermessen jederzeit ohne Ankündigung ganz oder teilweise verändern und / oder deren Betrieb einstellen und ist nicht dazu verpflichtet Inhalte dieser Website zu aktualisieren.
Hyperlinks zu den Websites Dritter stellen keine Zustimmung zu deren Inhalten seitens der SCHÜTZ+LICHT Prüftechnik GmbH dar und die SCHÜTZ+LICHT Prüftechnik GmbH ist nicht verantwortlich für die Verfügbarkeit oder den Inhalt dieser Websites.
Das Herstellen einer Verbindung zu diesen Websites geschieht auf eigene Gefahr des Benutzers.
Jegliche in Verbindung mit der Website oder deren Benutzung auftretenden Rechtsansprüche oder Prozesse unterliegen der Auslegung der Gesetze der Bundesrepublik Deutschland, mit Ausnahme der Regelungen des Internationalen Privatrechts. Diese Internetseite enthält bestimmte in die Zukunft gerichtete Aussagen, die auf den gegenwärtigen Annahmen und Prognosen der Unternehmensleitung beruhen.
Send inquiry
TELEPHONE & FAX
These listings may also fit your interest.
8
Langenfeld, Germany
(dealership location)
2021
new
SERVOCUT 302-MA Automatic abrasive cutting machine
- programmable with 7" touch screen operating panel with SIEMENS-PLC control
- automatic moving table + manual chop cut (other types available)
- cutting machine for a variety of different programmable cutting processes
- programming of cutting parameters via LCD display
- precise and motorized positioning of the sample in X - Y and Z axis
- integrated moving table control with force-dependent adjustable infeed speed
- variable cutting force...
5
* General * SKUR0835 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
B2ghqir7p3
5
Langenfeld, Germany
(dealership location)
2021
new
With 250 mm diameter of grinding wheel
- new equipment / demo unit for special price
- this machine is a standard machine for manual preparation
- optional we offer a specimen mover – please ask for details
Machine ready for use:
- basic machine disc diameter 250 mm
Tyvuax
- 250 mm platic grinding table
- splash guard
- disc cover
- connections for cooling water & water drain
Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions
inclusiv delivery by forwarder...
4
Langenfeld, Germany
(dealership location)
2021
new
ECOPRESS 52 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle.
Mounting cylinders and pistons with diameters ...
3
Wiefelstede, Germany
(dealership location)
used
two-armed drill, rotary drill, magnetic drill
Qlmwo0apk
-Recording: MK2
-Nominal consumption: 150 W
-Connection: 230 volts
-Transport case
-Dimensions: 350/300/H100 mm
-Weight: 5.5 kg
7
Székesfehérvár
new
Centrifugal pump
Manufacturer: KSB
Type: Etabloc-GN 50-125/302
GN11
Capacity: 50 m3/h
E3cghgl
2900 rpm
Lifting height: 13 m
Weight: 62kg
It is complete - with motor!
Profile bender, bending machine, angle bender, tube bender, ring bender, profile and tube bender
Qutzt
-Manufacturer: BPR Type RS-302
-Motor: 0.75kW
-Rollers: 8 set of rolls see pictures
-Intake: Ø 30 mm
-Max. bending capacity: flat steel max. 50 x 10 mm, square max. 30 mm, tube max. Ø 60 x 1.5 mm
-Dimensions: 660/550/H1560 mm
-Weight: 250kg
7
Remscheid, Germany
(dealership location)
new
Bosch Z-No. 1070044642-302 Axis Control Card, E Stand and serial no. according to photo,unused, 100% functional, scope of delivery according to photos
Cdqazws087
8
Exact type designation:
Danfoss FC-302P75KT5E20H1XGXXXXSXXXXALBXCXXXXD0
Output power and output current:
75kW | 147A
134F1301
° Article is NEW - 0 operating hours - see product images!
Swvq3g
° Formed 11/22
° Easy to use thanks to the integrated control panel
° Quick parameterization possible thanks to the quick menu
° Original operating instructions for commissioning included
° Original price: €8,455.00 net
Only 1 more in stock!
Item has been reset to factory settings...
5
2 systems available, one used for foaming gaskets for electrical cabinets, the other one used for gluing plastic parts.
Cgp9u7hig9
2
The reconditioned vacuum pump is available from stock and ready for immediate use.
We recommend that installation be carried out by trained personnel only.
Adaptation material available on request.
Oil filling: M-VAC 100
Technical data:
7.5 kW
3 x 190 - 208/380-415V/220-240V
F7fv9hk
50 Hz
incl. gas ballast in B-cover
incl. level switch
cooler reduced
Ultimate pressure with open gas ballast: 1,5 mbar
Ultimate pressure with closed gas ballast: 0.82 mbar
Subject to prior sale!
3
5
Wiefelstede, Germany
(dealership location)
used
Ring variable transformer, transformer
-Prim: 230 V 2.0 A 50-60 Hz
-Sec: 260 V/
Cldkal7q
4
Remscheid, Germany
(dealership location)
ready for operation (used)
Indur US 302 i= 19.88 spur gear motor SN:050513373 ,used, normal signs of wear, 100% functional, scope of delivery according to photos
Cdpgfvbgjs
15
saw blade diameter 300 x 32 mm
capacity 90 degrees: round 90,0 mm
capacity 45 degrees: round 70 mm
dimensions of saw-blade 300 x 32 x 2,5 mm
0 45 / 90 U/min
weight of the machine ca. 130 kg
dimensions of the machine ca. 720 x 980 x 880 mm
Furnishing:
- Robust cast iron structure
- Saw blade shaft mounted on a spherical cast eccentric
- Gear with bronze wheel and ground / hardened
- Steel screw (double ball bearing) in a special oil bath
- Vice with counter-clamping device for double
- workpie...
Exact type designation:
Qohdt
Danfoss FC-302P90KT5E00H4BGCDXXSXXXXA0BXCXXXXD0
Output power and output current: 110kW | 212A
° With TEST SEAL!
° ONLY 4600 operating hours!
° Including filters
° Easy to use thanks to the integrated control panel
° Fast parameterization possible thanks to the quick menu
° Original operating instructions for commissioning included
Only 1 piece in stock, IMMEDIATELY AVAILABLE!
Bottrop-Grafenwald, Germany
(dealership location)
2022
new
saw blade diameter 300 x 32 mm
turning speeds 3000 U/min
85 x 85 mm
120 x 50 mm
capacity 90 degrees: round 100 mass, 75 mm
60 x 60 mm
Capacity 45° rectangular 75 x 75 mm
80 mass. 85 mm
Cutting height 100 mm
total power requirement 1,5 kW
weight of the machine ca. 60 kg
dimensions of the machine ca. 700 x 500 x 900 mm
Description:
The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation!
With this machine, double miter cuts on the right and left are possible up
to 4...
5
Wiefelstede, Germany
(dealership location)
used
Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display
-for: turning and milling machines
-Manufacturer: Heidenhain
-Type: LB302
-Dimensions: 1915/49/H63 mm
Gcxbwjn
-Weight: 7.2 kg
4
Remscheid, Germany
(dealership location)
ready for operation (used)
Indur US 302 i= 14.18 spur gear motor SN:070401438 ,used, normal signs of wear, 100% functional, scope of delivery according to photos
Cdpgeynvnp
15
6
4 Pieces
Product condition: New from old stock
Guarantee in months: 12
Scope of delivery: 4 Pcs
Manufacturer: Bosch
Ft7wavd
Item No.: 3 842 174 302
5
Caterpillar haul-off and saw combination, used
Manufacturer: BLAKE
Type: 302-1100-140
Year of construction: 1993
Haul-off force: approx. 10.000 N
Cleat width: 120 mm
Tbmbq23
Effective pressing length: 1100 mm
Haul-off speed: approx. 0.5 - 10.0 m/min.
Caterpillar clamping: pneumatic
Drive motor haul-off: approx. 3.5 kW
Drive motor saw: approx.1,5 kW
Max. Profile cross-section: approx. 140 x 60 mm
Bottrop-Grafenwald, Germany
(dealership location)
2022
new
saw blade diameter 300 x 32 mm
turning speeds 3000 U/min
85 x 85 mm
120 x 50 mm
capacity 90 degrees: round 100 mm
B8p7d7i0kw
60 x 60 mm
Capacity 45° rectangular 75 x 75 mm
80 mm
total power requirement 1,5 kW
weight of the machine ca. 60 kg
dimensions of the machine ca. 700 x 500 x 900 mm
Description:
The TL-350-M is a manual circular saw with easy safe operation!
With this machine double miter cuts on the right and left up to 45 °
are possible. The miter adjustment is done here by turn...
5
Wiefelstede, Germany
(dealership location)
used
Sensor, write head, read head, tactile bore measurement
Sxcozdrf
-from: warehouse liquidation
-Product group: LF (70/455 kHz)
-Dimension: 40 x 33 x 61.5 mm
-Connection: M12x1 socket, 5.00 m, PU
-Protection class: IP 67
-Weight: 450 g
1
Sindelfingen, Germany
(dealership location)
2022
new
Motor power 1,1/2,2 kW
belt opening 130 mm
belt dimensions 350x32x2,5
weight 220 kg
Speed 30/60 1/min.
Cutting surface 0° 115 / 100 / 130x80
Cutting surface 45° right 100 / 85 / 90x80
Cutting surface 45° left 75 / 75 / 90x65
Cutting surface 60° right
Cutting area 60° left
Description
Manual crosscut saw for mitre cuts from 45° right to 45° left, with high sawing capacity.
Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (acc...
2
Technical data:
- automatic work sequence cutting operation , hydr. lifting /
- lowering of the saw frame , with hydr. material clamping
- saw band dimension 3600 x 27 x 0,9 mm
- cutting speed infinitely variable 16 - 73 m/min
- cutting pressure regulation stepless 10 - 15 bar
V98hvl7b
- Lowering speed 0 - 300 m/min
- Cutting range at 90° - round 305 mm
- square-flat 360 x 305 mm
- Coolant device
- drive 400 V / 1,5 kW
- space requirement approx. W 1800 x H 1800 x D 1200 mm
- Weight ap...
6
Guarantee in months: 12
Product condition: New from old Stock
Case: Paint is slightly damaged
Stroke: 250 mm
Item No.: 0 821 401 302
Imzam22ag
4
Name: Piston Membrane Pump
Manufacturer: Abel
Type: FG G 302-18/11
Year built: 1986
Material: mild steel
Dimensions: L 1900 mm x W 1550 mm x H 2300
Fomwp2kf
Empty weight: approx. 3000 kg
Speed: 1460 rpm
Flow rate: 20 m3/h
Operating pressure: 15 bar
Operating voltage: 380 / 660 V
Type of protection: 54
Flanges: DN 80
Condition: Used
Technical documentation: no
Price: on request
1
Stoll flat knitting machine
CMS 302
Type 519001096
Higtxma2a
8 gg / 7 gg needles
3 pieces available
4
Wiefelstede, Germany
(dealership location)
used
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders
-Stroke: 50 mm
-Piston diameter: 50 mm
-Piston rod: 20 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 345/65/H65 mm
-Weight: 2.05 kg/piece
Colwdt78
2
Vorchdorf
2021
used
Hydraulic hammer HUPPI 302 incl. chisel
with hammer plate M10, hoses and couplings
Type: HAP M10 TKB101-401
Year of manufacture 2021
Pegogfy
Own weight: 37,1kg
3
weiterstadt
1969
good (used)
Steel chain hoist type T 302 400 Volt 2 lifting speeds chain length 3 meter
Ptv0yi
6
Traces of use: some storage marks
Bxgtbqu7w
Product condition: New from old Stock
Guarantee in months: 12
Manufacturer: Bosch
Item No.: 0821 302 024
1
Model HD-S150 HD-S300 HD-D350A HD-S350B Load Capacity (kg) 150 350 350 Min. Height (mm) 302 360 360 Max. Height (mm) 1260 1300 1580 1300 Table Dimension (mm) 700*450*35 905*500*50 900*700*50 905*500*50 Dia. of the wheel (mm) 100 125 125 125 Net Weight (kg) 51 99 120 100 Packing Dimension (mm) 820*470*325 1010*520*380 1010*720*380 1010*520*380
Bqk02pyzgt
Exact type designation:
Danfoss FC-302P160T5E21H2XGXXXXXSXXXXA0BXCXXXXDX
Output power and output current: 160kW | 315A
° With TEST SEAL!
° Easy to use thanks to the integrated control panel
Ndnvygpl
° Fast parameterization possible thanks to the quick menu
° Original operating instructions for commissioning included
Only 2 pieces in stock, available immediately!
5
Wiefelstede, Germany
(dealership location)
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams
- Piston rod: O 50 mm
N9r9p
-Tube: O outside 145 mm
-Stroke: 302 mm
-Total length: retracted 640 mm
-Admission: hole O 40 mm
-Quantity: 2 pieces
-Price per piece
-Dimensions: 640/145 / H210 mm
-Weight: 38 kg / piece
8
Frequency converter
Manufacturer: Danfoss
Fh9whpt
FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX
Typ: VLT® AutomationDrive FC-302
(P2K2) 2.2 KW / 3.0 HP, Three phase
380 - 500 VAC, (E20) IP20 / Chassis
6
Piston Diameter: 32 mm
Stroke: 25 mm
B827eaj3tg
Pressure (pmax): 10 bar
Product condition: New from old Stock
Piston Rod Type: Single-ended piston rod
Guarantee in months: 12
Case: very good, no scratches
Item No.: 0 822 335 302
8
Frequency converter
B8cgvsn8tq
Manufacturer: Danfoss
Typ: VLT Automation drive FC 302
FC-302P7K5T5E20H1XGXXXXSXXXXAXBXCXXXXDX
(P7K5) 7.5 KW / 10 HP, three Phasen
380 - 500 VAC, (E20) IP20 / Chassis
6
Guarantee in months: 12
Function: Tested
Piston Rod Type: Single-ended piston rod
Case: Light storage marks
Piston Diameter: 50 mm
B83ujggem7
Product condition: New from old Stock
Stroke: 80 mm
Pressure (pmax): 10 bar
Item No.: 0 822 342 302
6
Guarantee in months: 12
Product condition: New from old Stock
Manufacturer: Bosch
Pressure (pmax): 16 bar
Cu9meoge
Traces of use: none
Packaging: Original packaging with marks
Item No.: 0 821 302 400
