Used Schaffer 5050 Z for sale (11,415)

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Dobowh U T Uo Ec Darekl Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: X-axis: 3,060 mm Y-axis: 1,260 mm Z-axis: 150 mm Work table: 6 ATS workpiece supports, each with 3 vacuum suction cups 6 rear workpiece stops, program-lowered, installed in one support each 6 front workpiece stops, program-lowered, installed in one support each, positioned approximately 970 mm from the rear 2 + 2 side workpiece stops 4 lifting rails, pneumatically program-lowered, for positioning heavy workpieces Vacuum pump 90 cbm/h Machining head equipment: Drilling head BH 21 L with: 14 vertical drilling spindles, each individually accessible 2 + 2 horizontal drilling spindles in the X direction Grooving saw, diameter 120° fixed in the X direction Milling spindle 12 kW, HSK 63 F Rotation speed 1,000 - 24,000 rpm Rotation right and left C-axis 360 degrees for adapter units 18-station tool magazine Safety features: * Safety mats in front of the machine * Protective grille on the left with access door XP 600 control system with NC HOPS 4 programming software Dksb Ec Dowhw Ihearsl Without tools and units Optionally available: * Adapter unit with lock case for door machining * Adapter unit with pivoting milling unit * Adapter unit with saw

Condition: used, The milling machine is equipped with a large clamping table and a swiveling universal milling head that can be swiveled in two planes and also positioned horizontally. The UWF series thus almost covers the area of ​​application of a universal milling machine. An automatic feed that can be switched via a gearbox drives the X- and Y-axes. The Z-axis can be traversed in rapid traverse. Dovetail guides in all axes can be precisely adjusted. With its extensive equipment, the UWF 1.1 is ideal for individual production, repair and training workshops. Djb Ec Dajwhkcrjrekl

Condition: like new (used), Year of construction: 2016, operating hours: 19,765 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, tool mount: 60 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, rotational speed (max.): 10,000 rpm, workpiece weight (max.): 4,000 kg, total height: 3,162 mm, total length: 8,575 mm, total width: 5,730 mm, bar diameter: 160 mm, overall weight: 26,800 kg, tool length: 500 mm, CNC controller: Siemens 840D solutionline CELOS, ERGOline Axes X-axis travel mm: 2.600 Y-axis travel mm: 1.100 Z-axis travel mm: 900 C-axis degrees: C-axis direct drive B-axis degrees: swivel head (B-axis) Feed rates m/min: 80 / 60 / 60 Rapid traverse m/min: 80 / 60 / 60 Acceleration in the axes m/s2: 5 / 6 / 6 Worktable Number of pallets: 1 integrated with rotary pallet Table dimensions mm: 2.600 x 1.100 Max. workpiece weight kg: 4.000 Spindle Spindle speed rpm: 10.000 Milling/turning table nc Number of pallets: 1 left side Table dimensions mm: Ø1.050 Maximum workpiece size (D x H) mm: 1.100 x 930 x 3.200 Dkob Ec Daswhk E Tsrjl Max. workpiece weight kg: 2.000 Table rotation speed rpm: 725 Drive power kW: 44 / 32 kW (40/100% ED) Tool system Tool holder: HSK-A100 Tool magazine slots: 60 Tool changer: Chain - Double gripper Max. Tool Diameter: 160 With occupied neighboring places mm: 115 Max. Tool Length mm: 500 Max tool weight kg: 12 Chip-to-chip time s: 7,5 Equipment Chip conveyor Swivel head Blowing air through spindle center selectable via M-function Signal lamp Mist collector 3D quickSET Coolant gun Oil skimmer Dynamic package (linear drive X/Y/Z axis) Ready for internal cooling (40/80 bar) OPTICAL TYPE PROBE SENSOR (RENISHAW) PROVIDED Blum laser NT Hybrid Internal cooling supply 40 BAR Rotating viewing window with laminated glass Package Mill / Turn Separation wall for 2 working spaces Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 L Machine running times Under power: 61.760 Operating Time: 19.765 Basic machine dimensions / weight Length mm: 8.575 Width mm: 5.730 Height mm: 3.162 Weight kg: 26.800

Condition: used, Year of construction: 2009, x-travel 1060 mm y-travel 610 mm z-travel 610 mm table-size 1220 x 510 mm spindle diameter 80 mm tool taper SK 40 spindle turning speed - stepless 10- 10000 U/min feeds 1- 30000 mm/min rapid traverse 30000 mm/min spindle drive 15 kW connected load 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3 x 3,2 x 2,7 m Deb Ec Dajv T Npvsrokl Control: Hurco Ultimax 4. Machine has 24 positions in the ATC, many toolholders with the machine, vices, a FLIP-POD Vacuum clamping system, a zero point clamping system SPEEDY classic 3.book and a Elbo Controlli NIKKEN tool set system.

Condition: used, Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V Dkebevr Hcwo Ec Darol total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine number: 016453-20.1 X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Max. Workpiece Weight: 20 t Table-Size (Lxw): 2.800 x 2.000 mm Tool Taper: SK 50 Distance Between Columns: 3.200 x 4.000 mm Dsbswh U Tno Ec Darokl Further information: 4 Milling Heads available.

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Djb Ec Dajrz Irrsrekl Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: new, Functionality: fully functional, machine/vehicle number: 6SE01001AC237AA7, overall weight: 30 kg, total length: 800 mm, total width: 400 mm, total height: 450 mm, protection type (IP code): IP20, Frequenty converter / AC Drive Sinamics G180 6SE01001AC237AA7-Z Year 2015 Nw/unused Djb Ec Dewhbtuoarjkl

Condition: used, Year of construction: 1997, y-travel 850 mm z-travel 600 mm y-travel 700 mm weight of the machine ca. 3,7 t Dkeb Ecswhf D Rs Darol dimensions of the machine ca. 1,6x1,6x3,1 m

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical. Ergonomic. Universal ZIMMERMANN FZU32 portal milling machine is in mint condition and can be secured under power can still be secured under power at the seller. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining Deb Eevwgtyjc Darjkl aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: used, Year of construction: 2003, pressure 45.0 t chamfer lenght 2050 mm distance between columns 1600 mm column arm 300 mm stroke 150 mm dayligth 395 mm ajustment speed 100 mm/sec working feed 1-10 mm/sec return speed 70,0 mm/sec table width 60,0 mm table height 905 mm oil volume 150 l operating pressure 340 bar voltage 400 V total power requirement 5,5 KW weight of the machine ca. 3500 kg range L-W-H 2900 x 2100 x 2420 mm good / well-maintained condition (!!) - in checked condition - machine video - ?v=f0lMBgZD1VU Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) Dksb Ec Dastyznborel - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: ?machineno=1008-9308356

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Dobjwh U Ths Ec Darskl Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Dsb Ec Den Hx Tlearokl Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Condition: used, Year of construction: 2022, x-travel 450 mm y-travel 600 mm z-travel 330 mm Control Heidenhain TNC 640 spindle HSK A 63 turning speeds 18000 U/min swivable table: STP 320mm Tools changer 55 fach/tools Internal cooling system 80 bar Chip coveyor JA Dsbjwh Ukte Ec Darokl Spindle hours 7521 h Machine on 10.532 h weight of the machine ca. 8,7 t 5-axis CNC machining center -Equipment & accessories -Dynamic Efficiency (ACC, AFC, vortex milling), -Dynamic Precision (CTC,AVD,LAC), -Additional magazine ZM216, torque drive in the C axis, -Spur gear tandem drive -in the A-axis, car. Cabin roof including side panel, interior -Scratch belt conveyor, chip washing gun, electric. heat compensation, -Tool breakage monitoring, robot cell RS05-2

Condition: excellent (used), z. e.g. for driving edging and multi-blade circular saws Dsb Eemu Ak Tsc Darskl EMZ 55 kW / 2970 rpm / B 3 / 400 V delta / 50 Hz Elektrim 30 kW / 2945 rpm / B 3 / 380 V delta / 50 Hz Motors with other power capacities also available

Condition: excellent (used), Year of construction: 2016, x-travel 950 mm y-travel 850 mm z-travel 650 mm Control HEIDENHAIN TNC 640 spindle turning speed range 20000 U/min tool taper HSK-A 63 coolant IKZ 40 bar swivable table: 850 x 750 mm c-axis 360° tool change unit 60 Pos. weight of the machine ca. 14 t This DMG DMU 95 monoBLOCK is in very good condition and can be inspected under power at the seller's premises by prior arrangement. Technical data: Clamping surface table C-axis: 850 x 750 mm Clamping surface rigid table: 1,000 x 750 mm Control: 3D control HEIDENHAIN TNC 640 Spindle speed: 20,000 rpm Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Dsb Ecevwgrps Darskl Tool changing device: Double gripper Magazine slots: 60 (chain magazine) Connected load: 50 kVA Coolant system IKZ: 40 bar / 23 l/min through spindle centre (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT and DESCRIPTION - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - Scraper belt chip conveyor with coolant system 600 litres, paper belt filter - Infrared measuring probe HEIDENHAIN TS 649 - 3D quickSET extension package - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle centre, selectable via M function - Operating mode 4 - Manual intervention with open work area doors - Documentation

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Deb Eowhm S Nsc Darekl Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Type: HEC 1600 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Table Load: 8.000 kg Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 240 Pcs./pcs. Turning Speeds: 20 - 9.000 RPM Dob Ecewh U Tbe Darokl Tool dimensions (with occupied adjacent spaces): 125 mm Rapid Travel X/Y/Z: 40.000 mm / min Weight Of The Machine Ca.: 35 t Numbers Of Pallets: 2 pallet change time: 60 s Further information: internal coolant supply

Condition: excellent (used), Year of construction: 2008, x-travel 1500 mm y-travel 1300 mm z-travel 600 mm Control HEIDENHAIN TNCi 530 spindle turning speed range 18000 U/min Dkob Eovwgriec Darjl tool taper HSK-A 63 tool change unit 30 Pos. table dimension - longitudinal 2000 mm table dimension - cross 1100 mm spindle drive 26 kW column daylight 1400 mm weight of the machine ca. 19 t dimensions of the machine ca. 5 x 2,4 x 3,6 m This fpt Raid portal milling machine is in very good condition and can be inspected under power at the seller's premises by arrangement. Description: Spindle hours approx.: 15.000h Tool measurement BLUM Laser

Condition: excellent (used), Year of construction: 1996, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Dkob Ec Dswhm Siearjl Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 2012, x-travel 6800 mm y-travel 3400 mm z-travel 2000 mm Control HH iTNC 530 table dimension - longitudinal 6000 mm table dimension - cross 2500 mm table load 150 t tool change unit 80 Pos. dist. between columns - front to rear 4700 mm weight of the machine ca. 80 t dimensions of the machine ca. 12 x 11 x 7 m This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: Dob Ec Daevwgpzorjkl --> Patented double Hirth serration with a pitch of 0.02 degrees --> Pitch of both swivelling axes 0.02 ° --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> simultaneous !! --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw

Condition: good (used), Year of construction: 1999, x-travel 2400 mm Dksb Ec Dasvwgphorol y-travel 2850 mm z-travel 1000 mm Control FIDIA C20 table dimension - longitudinal 2200 mm table dimension - cross 1800 mm table load 12 t workpiece tool changer 30-fach tool taper ISI SK-50 spindle turning speed range 5000 U/min power capacity - milling spindle 30 kW

Condition: excellent (used), Year of construction: 2016, pressure 400 t chamfer lenght 6100 mm distance between columns 5050 mm stroke 600 mm distance between table / ram 870 mm Djb Ec Deu N Iy Nsarjkl throat 600 mm table width 300 mm closing speed 100 mm/sec working feed 11 mm/sec return speed 120 mm/sec total power requirement 37 kW weight of the machine ca. 45 t

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° Djb Ecevwglvo Darskl b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.