Used Schaffer 5050 Z for sale (11,426)

Condition: like new (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 control SINUMERIK 840 D min. number of teeth 5 max. number of teeth 2000 transmission ratio 1:10 b-axis -5 / +90 ° total power requirement 75 kW voltage 400 V voltage 230 V weight of the machine ca. 9,4 t dimensions of the machine ca. 4,7 x 3,6 x 2,82 m Gleason-Pfauter 275 HC - NC bevel gear milling machine - Year of manufacture: 2002 - Equipped for milling with oil - Integrated magnetic chip conveyor, without cutter head + holders Technical data 275 HC: (workpiece) - Maximum transmission ratio --> 1:10 - Minimum number of teeth --> 5 - Maximum number of teeth --> 2000 Dkohxz Asvzhhmj R Aol - Maximum tooth height / full tooth depth --> 20 mm - Maximum tooth width --> 58 mm - Maximum pitch circle diameter --> 275 mm (tool) - Smallest permissible milling head Ø --> 2.5 inch - Largest permissible milling head Ø --> 9 inch (machine) -> slide path 325 mm - Vertical workpiece slide (Y-axis) --> 350 mm - Milling slide (Z-axis) --> 475 mm -> Largest basic angle 90° - Direction -B --> -5° -> Workpiece table 212.71 mm (speeds) -> feeds 1 - 6,000 mm/min -> rapid traverse 10,000 mm/min - B-axis --> 40 °/s -> Speeds 0 - 1,100 min/-1 - Workpiece table --> 0 - 1,100 min/-1 Translated with (free version)

Condition: used, Year of construction: 2024, Working dimension X: 2.600 mm Working dimension Y: 900 mm Working dimension Z: 60 mm Dkshxz Ajwa S Rbj R Ajl Number of milling spindles: 1 Main motor power: 4,5 kW Rotation speed max: 24.000 rpm Tool clamping system: Collet Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction BIESSE Drilling aggregate BH 17 L: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: Safety mat, enclosed cabin Control: PC control Software: BIESSE B_SOLID, BIESSE SOPHIA Conformity marking: CE mark, UKCA-Zeichen Total connection: 12 kW Weight: 1.800 kg Space requirement Length: 2,8 m Space requirement Width: 1,94 m Space requirement Height: 2 m

Year of construction: 2017, operating hours: 5,010 h, Condition: used, machine/vehicle number: HM1-1304, Turning diameter: 330 mm, turning length max.: 600 mm, travel (X/Z): 165+35/600 mm, B-axis, bar capacity: 52 mm, speed: max. 6,000 rpm, control FANUC Series 0i-TF, 12-station tool turret with driven tools, chip conveyor, machine weight: approx. 6,000 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkshxowh Tytez A R Ael

Condition: good (used), Year of construction: 2017, CNC Lathe - Horizontal Manufacturer: HWACHEON Machine Model: HI-TECH 450 BL YMC Control: Fanuc i-Series Year of Manufacture: 2017 TECHNICAL DATA Max. Turning Length: (mm) 1,214 Max. Turning Diameter: (mm) 420 Chuck Size: (mm) 305 Max. Turning Diameter Over bed: (mm) 700 Travel paths - X-axis: (mm) 280 - Y-axis: (mm) 120 - Z-axis: (mm) 1,390 Rapid traverses - Rapid traverse X/Y/Z: (m/min) 20 / 10 / 24 Spindle - Bar capacity: (mm) 89 - Max. speed: (rpm) 2,500 - Drive power: (kW) 22 / 18.5 - Torque: (Nm) 1,050 / 883.8 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: BMT-65 EQUIPMENT FEATURES + Flat guideways + C-axis + Y-axis + Blow-out gun + Steady rest carrier (suitable for SMW Autoblock) SLU-X-3-Z501215Z (SMW steady rest not included) Dkjhxz Aowhpgcs R Asl + Manual steady rest, manufacturer RICHTER + Chip conveyor + Automatic tailstock and quill + Work light + Coolant tank capacity: 240 liters Power consumption: 55 kVA Weight: approx. 7,800 kg

Condition: good (used), Year of construction: 2012, x-travel 900 mm y-travel 800 mm z-travel 1020 mm b-axis 360 ° Control Professional 5 Fanuc size of pallet 630 x 630 mm spindle taper HSK-A100 spindle turning speed range 20-10.000 U/min Spindlemotor 35/25 kW max. torque on the spindle 488/305 Nm feed speeds 50.000 mm/min table load 1,2 t 0 d1.000 x h1.300 mm tool magazin: 97 pcs. tool length - max. 690 mm diameter of tools max. 100/300 mm weight of tools max. 30 kg weight of the machine ca. 20 t dimensions of the machine ca. LBH 6,0 x 4,3 x 3,3 m Incl. chip conveyor Incl. high pressure cooling system Incl. spindle cooling Dehxzou U Ufge A R Aokl Machine run on aluminum Processing time: 23,350 hours

Condition: used, Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller manufacturer: FANUC, controller model: 310 IS, total height: 1,980 mm, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, space requirement length: 3,000 mm, space requirement width: 2,400 mm, CONTROLS .. CNC controls FANUC 310 IS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 600 mm .. Y-axis travel: 410 mm .. Z-axis travel: 460 mm Dkshxz A Revylpxo Ajl .. rotating range A-axis from: -30 ° .. rotating range A-axis up to: 120 ° TABLE .. clamping surface diameter: 350 mm SPINDLE / HEAD .. spindle revolutions (max): 12000 /min .. drive power: 18 kW AXIS DRIVES .. rapid traverse: 4800 mm/min TOOL MAGAZINE .. number of positions: 30 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3000 mm .. space requirements -front/back-: 2400 mm .. total height: 1980 mm .. total weight approx.: 7500 kg Operating hours: 35`000h Inklusieve: Vices see picture

Condition: used, Year of construction: 2006, max. wheel diameter 150 mm gear width 100 mm max. module 3 min. module 1 x-travel 190 mm y-travel 160 mm z-travel 100 mm turning speeds 5200 U/min swivel angle for work spindle +/- 40 ° weight 8,5 t with KUKA robot loading system TWIN-SPINDLE TECHNOLOGY The twin-spindle concept significantly shortens the cycle time and guarantees the high production output of the Reishauer generating grinding machine. During the grinding of a gear, the previously ground workpiece is unloaded on the second workpiece spindle workpiece is unloaded, the next gear to be ground is loaded and centred. REISHAUER GEAR HOBBING MODULE The generating module coordinates the complex axis movements of the generating grinding process and generates the exact geometry of the workpiece. Reishauer relies exclusively on the hobbing module developed in-house. This makes us more precise and continue to set the technological standards. REVOLUTIONARY PROCESSES Thanks to the targeted further development of the grinding process, Reishauer has been the technology leadership in the hard fine machining of gears for decades gears. One example of this is grinding with a cutting speed of 100 metres per second, polishing grinding and topological grinding. Djhxzoub Amre A R Aekl Equipment/accessories: - Turret with 2 workpiece spindles and dressing unit - Counter holder - 3 workpiece clamping devices - Centre unit with sensor - Hoffmann filter unit - 1 flange with grinding disc - Kuka robot - Safety devices for transport - documentation --> Grinding with LNS1 is possible on this machine. What is not possible istwist control grinding

Condition: used, Year of construction: 2022, Working dimension X: 2.500 mm Working dimension Y: 1.000 mm Dkjhowigt Noxz A R Aol Working dimension Z: 80 mm Number of milling spindles: 2 Main motor power: 3,3 kW Rotation speed max: 18.000 rpm 4th axis: Yes Horizontal drilling spindles in Y: 1 Cantilever machine: Yes Machine table: Feed-through technology Special workpiece clamping system: For doors Outfeed: vacuum lifter Milling for fittings: Yes Insert fittings: Yes Control: PC control Conformity marking: CE mark Space requirement Length: 9,7 m Space requirement Width: 4,1 m

Year of construction: 2004, operating hours: 27,349 h, Condition: used, machine/vehicle number: AN0184, Turning diameter: 280 mm, turning length: 550 mm, travel (X/Z): 200/570 mm, C-axis, FANUC Series 21i-TB control, 12-station tool turret with driven tools, maximum speed: 5,000 rpm, chip conveyor, machine weight: approx. 5,500 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkjhowh Tymjxz A R Ael

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles FORM 3000 Year of manufacture 2008 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Includes CAPA Electrode changer - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm Dkshxjwh Smrjz A R Aol We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm Dohxz Aev Rxa Ss R Aekl M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231259, Hermle C600 U, built in 2005, without Cellro magazine, with FANUC robot, without Lang loader (Cellro magazine with FANUC robot and Lang loader can be purchased optionally) Siemens 840 d control system Operating hours: 78,025 Spindle ON: 17,382 Drives ON: 37,955 Tool change: 586,110 NC software: 05.03.39 PLC software: 05.03.21 18,000 SK40 spindle Laser tool breakage monitoring Sensor Oil mist extraction Chip flushing gun X travel: 600 Y travel: 450 Z travel: 450 Rapid traverse in X/X/Z: 35 m/min Infinitely variable spindle speed Weight: approx. 6,700 kg Chip conveyor on the left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Coolant system standard - Chip conveyor - Enclosed cabin roof section - Electronic thermal compensation (iTNC) - Electronic manual control module (iTNC) - Tool breakage monitoring - Chip flushing gun - Foot switch for clamping/unclamping - 200 bar hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm Dehxswh Sbisz A R Aekl - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - X/Y/Z measuring system: 0.1 µm Optionally available: Cellro magazine, built in 2005, automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot • Type: Automated storage system (robot magazine) • Capacity: 300 tool holders (for storage and quick tool exchange) Optionally available: LANG Technik automation system with slide arrangement, built in 2005, storage capacity of approximately 50-60 clamping vises. Dimensions & weight of the machine tool: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information, as well as prior sale! Hermle C600 U, year 2005, without Cellro magazine, with FANUC robot, without long loader (Cellro magazine with FANUC robot and long loader can be purchased as an option) Siemens 840 d control system Operating hours: 78025 Spindle ON: 17382 Drives ON: 37955 Tool change: 586110 NC software: 05.03.39 PLC software: 05.03.21 18,000 Spindle SK40 Tool breakage monitoring Laser Probe Oil mist extraction Chip flushing gun X-path: 600 Y-path: 450 Z-path: 450 Rapid traverse in X/X/Z 35 m/min Stepless spindle speed Weight approx. 6700kg Chip conveyor left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Standard coolant unit - Chip conveyor - Closed cabin roof section - Electronic thermal expansion compensation (iTNC) - Electronic manual control module (iTNC) - Breakage monitoring tool - Chip flushing gun - Foot switch for clamping/unclamping - Hydraulic unit 200 bar for clamping/unclamping Traverse paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z axis (vertical): 450 mm Table: - Clamping surface: 800mm x 465mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Optionally available: Cellro magazine built in 2005 automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot - Type: Automated st

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) Dkohoul Etdexz A R Aol - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable, Top and bottom Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Dowel insertion: Yes Dowel diameter: 8 mm Dowel length max: 40 mm Safety device: enclosed cabin Milling for fittings: Lamello Clamex Interface for .dxf data: Yes Control: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP, HOMAG tapio ready, HOMAG WOODWOP 8.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Dkohxjwa Skboz A R Ael Total connection: 18 kW Weight: 3.975 kg Space requirement Length: 4,8 m Space requirement Width: 2,4 m Space requirement Height: 2,5 m

Year of construction: 2012, operating hours: 8,758 h, Condition: used, machine/vehicle number: AT0602, Turning length: approx. 700 mm, turning diameter max.: 400 mm, travels (X/Y/Z): approx. 275/80/700 mm, 16-station tool turret with driven tools, C/A axis, control FANUC Series 31i-Model A, counter spindle, 12-station tool turret, with driven tools, speed: max. 5,000 rpm, tool holder: VDI 30, chip conveyor, Caution: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dshxz Aewh Tygs R Askl

Condition: refurbished (used), Year of construction: 2019, Functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Dkjhswh Sigoxz A R Asl Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. Dkshxov Rpr Sez A R Ajl 080525

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. Dehewh Safjxz A R Aokl • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm Dkjhxsucphxoz A R Ael total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Condition: good (used), Year of construction: 2014, Mfd. 2014 Cutting area X axis 1'800 mm Y axis 1'800 mm Z axis 1'210 mm A axis +/- 105 ° C axis 360 ° Spindle Main drive Spindle power 94 / 113 kW Spindle speed 12'000 min-1 Torque spindle max. 300 / 410 Nm DDT Spindle power 105 / 125 kW Spindle speed 3'000 min-1 Torque spindle max. 844 / 1'202 Nm DDT Spindle power 63 / 75 kW Spindle speed 14'000 min-1 Torque spindle max. 200 / 275 Nm NC Rotary table Dimension milling ø 1'400 x 1'200 mm Dimension turning ø 1'400 / ø 1'800 mm Max. Rotary diameter ø 1'900 / ø 2'200 mm Tool changer Tool changer, places 92 / 204 Max. tool length 600 mm Max. tool diameter 125 / 250 mm Control Heidenhain TCN640 Siemens 840D sl Pallet changer Machine weight ø 1'800 x 1'400 mm Machine weight ø 1'400 / ø 1'800 mm Max. load 4'500 kg Quantity pallets 2 / 3 / 4 / Machine specifications Machine weigth 42'000 kg Dimensions length x width x height 6'200 x 6'500 x 3'900 mm Dohxzjvzb S Se A R Aokl

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Dkohxzjwh Tyye A R Ael

Year of construction: 1990, Condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Spindelderhzahl 60-1800U/min Dshxzsdzy Uyo A R Ajkl Working feed 10-3000 mm / min Rapid traverse 10 m / min Table size 1800x610mm Machine weight 9500 kg Table load: 3000 kg

Condition: used, Year of construction: 2015, Working dimension X: 3.740 mm Working dimension Y: 1.570 mm Working dimension Z: 250 mm Independent Z-axes: 2 Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 10 kW Rotation speed max: 24.000 rpm 4th axis: Yes Dkehxzjwidzwe A R Ajl 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 34 Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Laser setup aid: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Control: PC control Conformity marking: CE mark Total connection: 29 kW

Condition: like new (used), operating hours: 83,500 h, machine/vehicle number: IntNr231113, IntNo. 231113 Goods tariff number 8457 10 10 00 Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-station plate changer and 4-station pallet station NC rotary table 360° Precision package Tool holders Steep taper: HST 100* DIN 69893 Form A Tool magazine positions chain: 1 x 90 & 1 x 90 Chip conveyor including belt filter from Knoll BILUTEC Air Technology – Filtration Systems Machine number: 28840003102 Year of manufacture: 2001 Control system: Siemens Sinumerik 840D Operating hours: approx. 83,500 h Specifications Technical data Main drive • Direct drive via liquid-cooled, variable-speed induction motor • Speed ranges, continuously programmable: o Operating mode: 0 to 6,000 rpm o Setup mode: 0 to 800 rpm o Manual Interventions: 0 to 5,000 rpm • Torque: o S1 – 100% duty cycle: max. 300 Nm (220 lb-ft) o S6 – 40% duty cycle: max. 440 Nm (322 lb-ft) • Power: o S1 – 100% duty cycle: 25 kW (33 hp) o S6 – 40% duty cycle: 37 kW (49 hp) Feed drive • 3-phase AC synchronous servo motors • Feed rate of the X/Y/Z axes: o Continuously programmable: 1 to 40,000 mm/min (0.04 to 1,575 in/min) o Rapid traverse: 40,000 mm/min (1,575 in/min) o Set-up mode: 1 to 2,000 mm/min (0.04 to 79 in/min) o Manual interventions: 1 to 5,000 mm/min (0.04 to 200 in/min) • Feed force: o X/Z axes (100% duty cycle): max. 15,000 N (3,372 lb) o Y-axis (100% duty cycle): max. 10,000 N (2,255 lb) Measuring system • Resolution, smallest input step: o X/Y/Z axes: 0.001 mm (0.0004 in) Dehxz Aowh R T Rs R Askl • Position tolerance (according to VDI/DGQ 3441): o Direct measurement of the X/Y/Z axes: 0.010 mm (0.004 in) o Direct measurement of the B-axis: 14 arc seconds Rotary table • Speed: max. 19 rpm • Clamping force of the pallet: 120,000 N (27,000 lb) • Tilting moment: max. 16,000 Nm (3,520 lb-ft) • Tangential moment: max. 4,800 Nm (3,523 lb-ft) Pallet • Quantity: 1 • Size: 500 x 630 mm (19.7 x 24.8 in) • Permissible load per pallet: o When using 1 pallet: max. 500 kg (1,102 lb) o When using 2 pallets: max. 900 kg (1,984 lb) • T-slots: o Quantity x width: 4 x 14 mm (0.16 x 0.55 in) • Guide slot: o Quantity x width: 1 x 14 mm (0.04 x 0.55 in) Working area • Travel range: o Tool diameter greater than 200 mm (7.87 in): o Tool diameter less than 200 mm (7.87 in): o Asymmetric travel range: o X-axis: 800 mm (31.5 in) o X-axis: mm (+19.7/-15.7 in)  Y-axis: 710 mm (27.9 in)  Z-axis: 710 mm (27.9 in)  B-axis: 360° Machine size: 4,600 x 2,400 x 2,700 mm Machine weight: 10,500 kg 1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg 1x Control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg 1x Chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg 2x Pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg 1x Euro pallet with hydraulic unit 1x Euro pallet with some accessories 1x Euro pallet with covers: L = 200 cm x W = 100 cm 1x Filter holder: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg 1x Tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg 1x rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg Delivery time at short notice upon request. The machine can be inspected by appointment. Subject to changes and errors in the technical specifications and information, as well as prior sale! Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-fold plate changer and

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dohxz A Rowh Ty Ho Ajkl