Used Hsm Vatenpers Fp-1500 for sale (60)

Condition: used, Year of construction: 1995, power: 2 kW (2.72 HP), Vertical Baler HSM 45 VL for SALE/RENT! Manufacturer: HSM Dwedpfoxxli Eex Aduef Model: 45 VL Year of manufacture: 1995 A total of 8 units available. Sale price: 1,200 EUR per unit (ex works Lithuania)

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, Equipment: documentation/manual, The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. Dwedpjxw R D Eefx Adujf The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Stock no.: 9960 Year of manufacture: 2016 Pressing force: 55 t Dwsdpfx Aoxn Ilzoduef Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions (WxDxH): 1700 x 1800 x 2200 mm Weight: 2430 kg Materials: Paper, Cardboard, Film Operating manual is available. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the given specifications or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex-works, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2019, HSM V Press 1160 plus Pressing force 532 kN, opening width 1,195 m, opening height 0.65 m, drive power 4 kW, press type BP, dead weight 2.43 t, transport length 1.78 m, transport width 1.568 m, transport height 2.995 m, press type baler. Dsdpfx Adel Uvuksuewf Press immediately ready for use.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg Djdjttaytjpfx Adujwf

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Djdpoxcngnjfx Aduswf Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical specifications: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Dedpfxexuqkms Adujwf Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE ON REQUEST!

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Unit pressure:, 2.33 kg/cm², Dedpfov Alacjx Aduswf Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Dsdpfx Ajt H Rcasdujwf Your service team Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: HSM-300034869, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned and tested for functionality. Technical Details: Manufacturer: HSM Type: V-Press 860 plus Bale size (LxWxH): 1200 x 780 x 1200 mm Dsdpfxevpfw Ue Aduewf Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Feed opening: 1195 x 650 mm Pressing pressure: 548 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Press weight: 2,010 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: Indoors / outdoors, covered Serial number: 300034869 Year of manufacture: 2009 Please refer to the original documentation, which can be obtained directly from the manufacturer.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg Dedpfxjttal Ae Aduowf

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Dedpfxsvtpq Hj Adujwf Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section Dwoden Hxiiepfx Adusf - cutting width max. (mm): 2100 - heating: included - cooling: included

Condition: excellent (used), Technical data: Pressing force: 178 kN Drive power: 4 kW Dedsv Akmzopfx Adujwf Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: HSM-300040368, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM Djdpfownpz Hox Adujwf The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: HSM Model: V-Press 860 plus Bale size (LxWxH): 1200 x 780 x 1200 mm Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Feed opening: 1195 x 650 mm Pressing force: 548 kN Throughput: 1 - 2 bales / hr Number of wire channels: 4 Weight of press: 2,010 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: inside / outside covered Serial number: 300040368 Year of manufacture: 2009 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: good (used), Year of construction: 2013, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Dsdpfx Asttav Neduowf Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Djdjwrybrspfx Aduowf Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg Dwedsv Amv Eopfx Adujf - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2012

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: HSM-390000438, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and functionally tested. Technical details: Manufacturer: HSM Type: V-Press 860 plus Bale format (LxWxH): 1200 x 780 x 1200 mm Dwedpfjwnpxlsx Aduef Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Feed opening: 1195 x 650 mm Pressing force: 548 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Weight of press: 2,010 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoor / covered outdoor Serial number: 390000438 Year of construction: 2013 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Dwsdpfx Aeur Ravoduof Power supply unit missing

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Dsdpfx Adjra Nrxjuewf Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: HSM-300034873, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function tested. Technical details: Manufacturer: HSM Dwsdpfx Adewnpw Isusf Type: V-Press 860 plus Bale format (LxWxH): 1200 x 780 x 1200 mm Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Feed opening: 1195 x 650 mm Pressing force: 548 kN Throughput: 1 - 2 bales / hr. Number of wire channels: 4 Weight of the press: 2,010 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoor / covered outdoor Serial number: 300034873 Year built: 2009 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Dwsdpfxsra Rbge Adusf Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: excellent (used), Model: HSM V-press 1160 plus baler Press force (kN): 532 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (LxWxH) (mm): 1780x1150x2985 Power (kW): 4 kW Weight (kg): 2300 Dwedpfxev Al Tij Adujf Year of manufacture: 2017-2021 Year 2018, price: 8,500 EUR

Condition: ready for operation (used), Hsm HL 4809 LI baler - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 Dedpfsra Dddjx Adujwf - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire