Used Tabe Agb-175 for sale (1,424)

Year of construction: 2006, condition: ready for operation (used), Controls: SIEMENS SIMATIC OP7, operational hours counter: ca. 1700h. Gsdpjin E Tajfx Afzouf

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Gedoztu Dbspfx Afzsuf Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Godpoykrtpsfx Afzjuf Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Siemens 6AV2124-0GC01-0AX0 Simatic HMI Touch E-Stand 25, serial number C-JNP10175, used, in good condition, 100% functional, scope of delivery as shown in the photos. Godpfjznq N Njx Afzsuf

Condition: excellent (used), mileage: 175,000 km, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, Year of construction: 2019, Equipment: air conditioning, central locking, cruise control, = Additional Options and Accessories = - 2-pedal control - Heated mirrors - Leaf spring suspension - Brake booster - Rotating beacon - Rearview camera - Sun visor - Xenon lighting = Notes = 6x4 Euro 6 C Leaf spring suspension Auxiliary drive Only 175,000 km Belgian registration In very good condition! Immediately ready for use 3 units available = Further Information = General Information Year of manufacture: 2019 Technical Information Number of cylinders: 6 Transmission Gearbox: ZF, 12 gears, automatic Axle Configuration Suspension: Leaf spring suspension Front axle: Steered Rear axle 1: Reduction: External planetary axles Rear axle 2: Reduction: External planetary axles Weights Unladen weight: 9,741 kg Payload: 16,259 kg GVW: 26,000 kg Condition Technical condition: very good Optical condition: very good Godezta Tzjpfx Afzeuf

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead Gusdpfxexy S A Is Afzef - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Bone saw Berkel BS 1750 RN 16A, 380V. In excellent condition. Workshop-tested, defects rectified. Motor brake. New saw band. Year of manufacture: 2009 Viewing and test run are gladly possible by telephone appointment! Gedpfx Afsx I Efzezouf Additional machines available. Payment by cash or advance payment! Sale to business customers only; no warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, Containerized boiler system HOVAL MAX-3 Output: 1750 kW Gjdjzp R Nfopfx Afzeuf Year of manufacture: 2019 Burner: ELCO

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,341 h, load capacity: 500 kg, empty load weight: 9,040 kg, fuel type: electric, PB S175-19E 4x4. Year of manufacture: 2015. Platform capacity: 500 kg. Working height: 18 meters. Rough terrain 4x4 drive. Automatic leveling system for uneven ground. The aerial work platform is in good working condition. A video of the machine is also available via WhatsApp. Price net + 21% VAT or net for export. We are open to your price offer! We also have a similar aerial work platform from 2014 with 3050 hours available in blue. €7000 net. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Gjdpszrntyjfx Afzouf Machines are sold EX Works Winterswijk (NL) in as-is condition!

Condition: used, Year of construction: 2012, operating hours: 5,042 h, Equipment: ABS, TEREX FUCHS MHL 360 Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? BETRIEBSSTD. 2 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Gsdpfx Afjzt Uutezsuf

Condition: used, Screw compressor Manufacturer : KAESER Model : CS121 Output pressure: 7.5 bar Capacity of one booster: 750 m3/h Gjdpfxjv Aha Ej Afzjuf Year of manufacture: 2000 Technical condition: used machine, operational

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on Gsdpfxsu Ni Rps Afzsuf 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address Guedjmdn T Dopfx Afzjf

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Guodpfx Afemdn Uajzof Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Gusdpfx Ajnkan Hofzef Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L Guedpfjmdn T Sex Afzsf At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Gjdonkb Urepfx Afzeuf Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, SEW Eurodrive K57 DRS71M4BE1/ASE1/TF/Z Motor SN: 01.7566848001.0001.18,unused, 100% functional, scope of delivery according to photos Gedpfel Echwsx Afzouf

Condition: not inspected (used), Manufacturer: KUKA The robot's condition is unknown; Gujdpfx Aoh Tirxofzjf it is being sold in this condition!

Condition: not inspected (used), Manufacturer: KUKA Guodpfxjh Tkglo Afzef The robot's condition is unknown; it is being sold in its current state!

Condition: used, Year of construction: 2010, power: 15 kW (20.39 HP), input voltage: 380 V, pressing force: 175 t, stroke length: 280 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table width: 90 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 3,100 mm, distance table to ram: 429 mm, clearance between the columns: 2,550 mm, oil tank capacity: 185 l, total length: 5,000 mm, total width: 2,170 mm, total height: 2,800 mm, overall weight: 9,600 kg, We are offering this used Blecken CNC HAPPE SE 3100 X175 straightening press, year of manufacture 2010. Technical Specification: Blecken CNC HAP 3100-175 Hydraulic Press Brake Model: Blecken CNC HAP 3100-175 with Delem ER70 CNC control Axes: 4 axes (Y1, Y2, X, R) Capacity and Performance • Pressing force: 175 t • Bending length: 3,100 mm • Approach speed: 100 mm/s • Bending speed: 9 mm/s • Return speed: 80 mm/s Dimensions and Travel • Distance between uprights: 2,550 mm • Cylinder stroke: 280 mm Godpfx Ajy Rw H Aofzouf • Table/opening height: 429 mm • Throat depth: 400 mm • X-axis travel: 500 mm • X-axis speed: 500 mm/s • R-axis travel: 200 mm • Working height (table): 900 mm • Table width: approx. 90 mm General Specifications • Motor power: 15 kW • Oil tank capacity: 185 l • CNC control: Delem ER70 • Noise level: ≤ 70 dBA • Voltage: 380 V Physical Dimensions and Weight • Overall length: 5,000 mm • Overall height: 2,800 mm • Overall width: 2,170 mm • Weight: 9,600 kg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, MTF conveyor belt MTF 2550x410mm year: 2020 Guedpfx Aox Up R Iefzsf price: 2.200 Euro contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 1998, machine/vehicle number: 145893, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, displacement volume: 56 cm³, injection pressure: 2,500 bar, For sale is an Arburg injection molding machine, type Allrounder 221-75-350. The machine is in used condition. Technical data: ARBURG Maschinenfabrik Hehl & Söhne GmbH & Co.KG Model / Type: Allrounder 221-75-350 Machine No. / Serial Number: 145893 Year of Manufacture: 1989 Machine Weight: 970 kg Clamping Force: 350 kN Clear Tie Bar Spacing: 221 mm x 221 mm Platen Dimensions: approx. 342 mm x 342 mm Opening Stroke / Stroke: 275 mm Tool Installation Height: 150 mm / 300 mm Max. Platen Distance: 425 mm Injection Unit: Screw Diameter: 22 mm / 25 mm Max. Injection Volume: up to 56 cm³ Max. Shot Weight: up to 50 g Specific Injection Pressure: up to 2500 bar Electrical Connection Values & Power: Operating Voltage: 380 V (3 phases) Mains Frequency: 50 Hz Heating Power: 3.46 kW Pump Motor: 7.5 kW Total Power / Total Connected Load: 11.0 kW Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Godpfx Aozki N Tefzsuf For more information or contact options, please visit our website.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 697 h, load capacity: 6,000 kg, lifting height: 29,900 mm, fuel type: diesel, construction height: 3,100 mm, empty load weight: 21,800 kg, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic handler Godpfozb R Uyjx Afzjuf Technical condition: New Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Battery voltage: 12V Rear work lights, front work lights, full cab, CE certificate, Image is for illustrative purposes only. Wheel chocks, TÜV preparation, 40 km/h, LED work lights on the telescopic arm, fixed part on the right side, car radio with USB and Bluetooth, external microphone, 100W LED spotlights around the machine, 5x vibration dampers for the telescopic boom, Active CRC.

Condition: used, Year of construction: 2014, machine/vehicle number: 3237006, Manufacturer: Formcook Model: PRoGRILL 1175 TFEF Year: 2014 Condition: Used Serial Number: 3237006 Stock Number: 3066 Belt width: 1100 mm Guedpfx Aey Ib Tbefzsf Cooking length: 10000 mm Heating: thermal oil, 189kW + electric, 128kW Exhaust: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Water: 15,4 l/min for belt washer Power: 3 x 400V, 50Hz, 168kW Dimensions: 10000 x 2200 x 2450 mm