Used Gesan Dps 250 for sale (10,299)

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm Dkedpfx Apjw Rktbjden workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control Dkedpfx Asu N Ddwspdsn - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Technical details: diameter: 250 mm weight of the machine approx.: ca.31 kg revolution per minute: 3504 U/min 3 jaws lathe chuck Dkjdpfx Aou Nk D Ropden - incl. 3 pcs of jaws external / internal *

Condition: used, Technical details: vertical rapid adjustment: z-Achse: 1125 mm horizontal adjustment: x-Achse: 600 (+1000 elektrisch-manuell) mm cross adjustment: Frässupport y-Achse: 325 (340) mm Dodpfxsu Idlfe Apdekn control: Siemens 840D diameter of clamping surface: 3500/5800 mm turning diameter: max.6000 mm range of revolution per miute: Planscheibe: 1 - 12 U/min revolution per minute: Frässpindel: 1000-6000 U/min max. workpiece diameter on pallets: 6000 mm workpiece weight: 10 - 2000 kN tool taper: HSK-A-100 total power requirement: 120 kVA weight of the machine ca.: 35,0 t Annular Ring and Cylinder Machining Center Vertical special CNC machining center application: for turning-drilling and milling, grinding of annular parts (large gears, roller slewing rings, gear rims, special flanges, etc.) machine consists of two separate main groups: column unit and face plate/table unit - Feed drives via AC servomotors - cross adjustment milling support z-axis 325 (max.340) mm - Drive power of the faceplate drive 76 kW - Positioning of the table = 0,02mm What was renewed: - Axle motors were renewed (Siemens) - Central lubrication for large-diameter antifriction bearings of the turntable/spindle has been extended - partly the machine cabling - bladder accumulator and the safety valve i.D. *

Condition: used, Year of construction: 2001, Technical details: Djdpfx Asxna Uzopdjkn pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Dksdeu Ng Npjpfx Apdjn Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Dksdpfx Apsu Nlg Tsdjn Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Dkjdpfx Aou N E Dxjpden Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck *

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm Dkjdpfxsy E Hyno Apdjn band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine xH: 1480 x 1700 x 2000 m

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Both pumps = 7.5 kW Weight 164 kg Dkedpfx Apju N E Htoden *

Condition: used, Year of construction: 1982, Technical details: cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Dkedpfxeu Nilaj Apdjn Workpiece holder via fixed jaw and clamping jaw, with hand crank Coolant device in the base limit stop *

Condition: used, Technical details: filter cartridge type: mechanisch air flow rate: 1.330 m³/h total power requirement: 40 kW weight of the machine approx.: ca. 300 kg Mobile extraction system with wet separator - Industrial extraction system Use for combustible dusts (for aluminum and magnesium dusts); EX protected Construction: sheet steel housing Dust cartridge dust class M 10 m² and dust class H 10 m² Dust extractor: -size Ø 580 x 1,000mm -Pipe connection Ø 160 x 60mm -mechanical filter Dust container: -size Ø 580 x 550mm -with 4 wheels Ø 100x36mm) swiveling Water separator: -with 2" drain valve with hand lever -max. capacity 75 liter * Dksdsu Nv A Espfx Apdsn

Condition: used, Year of construction: 1996, Technical details: Dsdou Nwxnepfx Apdjkn cutting range for steel to: 25 mm Ampere: 2 x 120 A ( 2 verfügbar) Plasma cutting system with possible welding processes: - Plasma cutting, flame gouging; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals as well as arc welding Description: - Power source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) multiple frequencies 50/60Hz ( 2 pcs available price per piece) - Torch: CPM 250 (flat electrode) 1 pc available i.D. *

Year of construction: 2016, condition: used, Technical details: wheel base: 950 mm lifting capacity: 25000 kg Lifting height: 1310 mm Tare weight: 2100 kg dimensions LxWxH: 1,7 x 2,0 x 0,75 m total power requirement: 11,2 kW WHEELSET CHANGING SYSTEM - WHEELSET SWIVEL Application: Changing wheelsets and driving sets for railroad applications (locomotives, freight wagons, etc.) Dksdpsx Ac R Usfx Apdjn 2 speed levels forward/backward 2 speed levels lifting approx. 60 sec./lowering approx. 110 sec., operation via manual control unit shift left/right +/-20 mm Lift category 5 EMERGENCY OFF Platform: L: 1420 x W: 657 mm, effective stroke 1050 mmOperating pressure for hydraulics = 185 bar Speed of chassis = 2 stages min. 18 mm/sec. Center distance: 950 mm Equipment: 10 m connection cable with 380 V *

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m Dodsu Nurxspfx Apdekn conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm *

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm Dodpfov U Un Hex Apdekn center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: excellent (used), Year of construction: 2018, CATALOGUE NUMBER 8009 TECHNICAL DATA - max. material width 600mm - max. cutting height 170mm - diameter of upper spindle 70mm - diameter of lower spindle 70mm - diameter of circular saw: option 1: 250mm/350mm, option 2: 300mm/300mm - length of upper spindle working part 550mm - length of lower spindle working part 550mm - spindles equipped with a brake - spindle wedges 2 pcs - power of upper drive spindle motor 18.5kW Dkedey Uvlxopfx Apden - power of lower drive spindle motor 22kW - power of feed drive motor 2.2kW - stepless feed speed adjustment via a frequency inverter - average diameter of dust extraction nozzle 2x200mm from above: - pawls 2 rows - toothed draw roller - saw arbor - toothed draw roller - sliding roller, metal from below: - draw chains - saw arbor - draw chains - sliding roller, metal - overall dimensions L/W/H 3170/1450/1730mm - weight approximately 2500kg ADVANTAGES – Polish production – multi-blade, two-spindle saw – year of production 2018 – documentation: DTR + CE – used multi-blade saw, very good condition Net price: 78900 PLN Net price: 18786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), mileage: 103,000 km, power: 184 kW (250.17 HP), first registration: 01/2003, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 10,000 mm, total width: 2,350 mm, total height: 3,300 mm, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 9,800 kg, permissible axle load (axle 3): 5,600 kg, Year of construction: 2003, Equipment: ABS, EBS, central locking, differential lock, electric window regulation, power assisted steering, power mirror, = Additional Options and Accessories = - Brake booster - Differential lock - Air suspension - Air horn - Radio/cassette player - Rotating beacon - Disc brakes - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication system = Notes = Metz 30 meter Generator 6 kVA, 4138 operating hours = Additional Information = Axle configuration Front axle: Max. axle load: 5600 kg; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle 1: Twin tires; Max. axle load: 9800 kg; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Max. axle load: 5600 kg; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Air suspension Weights Unladen weight: 14,820 kg Payload: 6,180 kg GVWR: 21,000 kg Dkjdjzbuuqopfx Apdon Functional Mast length: 30 m CE marking: yes Condition Technical condition: very good Optical condition: very good Further Information Please contact Andre, Henri, or Andre for further information.

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device Dkjdpfx Aegt E Ilepden - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Dkjdpfx Apop Dt Uuedjn Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Year of construction: 2022, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Magni rotating work platform / tree care platform / 250 kg / suitable for RTH & TH series / year of manufacture: 2022 / demo unit / in stock & immediately available Price: €4,490.00 net / €5,343.10 gross - Max. load capacity: 250 kg - Width: 670 mm - Length: 1,400 mm - Rotation range: +/- 90° - Max. number of occupants: 2 - Automatic attachment recognition: yes - Rotating work platform, rotation range +/- 90° - Galvanized, reinforced steel construction - Non-slip floor for safe work at height - The remote control is required for using the work platform and must be installed on the machine This attachment is suitable for the RTH and TH series. Product code: ATT-01-003 We have many other attachments for Magni in our warehouse that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 016453 = Further information = New: No Intended use: Construction Dedezb Ugaspfx Apdokn Please contact Marius Herden for more information.

Condition: used, Year of construction: 2006, Nominal airflow: 4400 m³/h Extraction nozzle: 250 mm Motor power: 5.5 kW Nominal speed: 2880 rpm Weight: 730 kg Location: Nattheim Dodpfx Apoyw Tw Dsdskn

Year of construction: 2023, condition: used, Manufacturer : Sesotec Model : Raycon D+ HX 1400 / 660 / 450 / 250 Dksdpfoy Abcrjx Apdsn Year : 2023 Type: X-ray detector – X-ray inspection systems for food Product width: max: 450 mm Maximum product height: 250 mm Belt width: 660 mm Detection : 0.4 mm Capacity : 900 pcs/min Speed v = 0,32 -1,04 m/s X-ray Source : 40–100 kV / 2.0–5.0 mA (200 W) Weight : 585 kg Weight / conveyor : 111 kg

Condition: new, Year of construction: 2026, Josan Power Generators – Proven, Durable Quality! We also offer leasing and financing. Don’t hesitate to ask! ‼️5-Year Warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and much more. Available for pickup in Heilbronn. We also offer affordable shipping – simply inquire! Models available up to 1000 kW. All units equipped with electric start diesel engines, e.g., 56 kW, 1500 rpm. Compare prices and check what type of engine you get for what price. Ask what is actually produced in Germany or Europe. We also offer Cummins engine options for an additional charge. Top quality at discount prices! We are here for you in Heilbronn. German company, German laws, German service! All-inclusive pricing. With our certified German electricians, we offer fast and direct support if you ever need assistance. We also rent generators for uninterrupted service. We call everyone back. Discounts available for orders of 10 units or more. Contact us – we call everyone back. Generator 320 kVA / 250 kW: ➡️ Proven engine Dsdpfx Apjp E Egaedskn ➡️ Proven 6-cylinder diesel engine ➡️ Very quiet, only approx. 65 dB ➡️ 3-phase, 380/400 V, 220/230 V, 50 Hz ➡️ AVR regulation ➡️ Dimensions approx. 3700mm x 1300 x 1910mm ▶️ Weight approx. 2,400 kg ➡️ Electric starter ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Optional: 1 socket 400V 125A ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ CE certificate ➡️ With battery charger ➡️ With ATS Net price: €22,900.00 Generator 150 kVA / 120 kW: ➡️ 380/400V, 220/230V, 50Hz ➡️ AVR regulation ➡️ Very quiet, only approx. 65 dB ➡️ Dimensions approx. 2800 x 1100 x 1500mm ▶️ Weight 1,390kg ➡️ Proven 6-cylinder diesel engine, 132 kW / 1500 rpm ➡️ Electric starter ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Optional: 1 socket 400V 125A ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ CE certificate ➡️ With ATS ➡️ With battery charger Net price: €10,900.00 Generator 63 kVA / 50 kW: ➡️ 380/400V, 220/230V, 50Hz ➡️ Very quiet, only approx. 65 dB ➡️ Proven 4-cylinder diesel engine, 56 kW, 1500 rpm ▶️ Weight approx. 860kg ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ Electric starter ➡️ CE certificate ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Fully EU-compliant (including 220V as in Germany) ➡️ With AVR regulation ➡️ With battery charger ➡️ With ATS Net price: €6,900.00 Generator 50 kVA / 40 kW: ➡️ Proven engine ➡️ Proven 4-cylinder diesel engine ➡️ Very quiet, only approx. 65 dB ➡️ 380/400V, 220/230V, 50Hz ➡️ Dimensions approx. 2250 x 960 x 1270 mm ▶️ Weight approx. 860kg ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ Electric starter ➡️ CE certificate ➡️ With ATS ➡️ AVR regulation ➡️ With battery charger Net price: €6,900.00 Generator 25 kVA / 20 kW: ➡️ 25 kVA / 20 kW ➡️ Proven engine ➡️ Very quiet, only approx. 65 dB ➡️ 3-phase, 380/400V, 220/230V, 50 Hz ➡️ Dimensions approx. 1800 x 900 x 1000 mm ▶️ Weight approx. 650kg ➡️ Electric starter ➡️ CE certificate ➡️ With ATS ➡️ AVR regulation Net price: €5,900.00 All prices are net plus 19% VAT. The images may show optional accessories at extra cost. Images may vary! Subject to error. * Please ask for our warranty conditions.

Condition: used, mileage: 504,000 km, power: 188 kW (255.61 HP), first registration: 07/2014, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 58 m³, loading space length: 8,450 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, tail-lift, Volvo FL 250 Box Truck with Roller Shutter, Tail Lift, Euro 6 Reference for inquiries: 0226147 * Power: 188 kW / 250 HP * Displacement: 7,698 cc * ABS * EBS * Rear axle differential lock Dsdjzb Skvjpfx Apdskn * AdBlue tank, right side * Air-suspended comfort driver’s seat * Manual roof hatch * Air conditioning * Power windows (driver / passenger) * Electrically heated and adjustable mirrors * CD Radio / AUX / USB Tail lift: Dhollandia Lifting capacity: 1,500 kg Body: Box * Roller shutter * Wear-resistant wooden floor * Lashing rail left/right Dimensions (cargo space/load area): Cargo length: 8,450 mm Cargo width: 2,500 mm Cargo height: 2,700 mm Tyres: 1st axle: 285/70 R 19.5, leaf-sprung / 35% 2nd axle: 285/70 R 19.5, air-suspended / 35% ---- Price: €15,900 + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French and ????? Errors, mistakes and prior sale excepted.